ball mill for dyes

dye ball mill, in naroda, ahmedabad , sarita fabricators | id: 11358084562

dye ball mill, in naroda, ahmedabad , sarita fabricators | id: 11358084562

Being a prominent firm, we are engaged in manufacturing and supplying a distinguished assortment of Dye Ball Mill.Applications:- To grind and blend materials for use in mixing dyes.- In chemical industries to mix dry chemicals.

pigment and dyes | union process

pigment and dyes | union process

But there are also important distinctions between pigments and dyes. Pigments result in a suspension because they are insoluble in their vehicle, while dyes are either liquid or result in a solution because theyre soluble in their vehicle.

Dyes also chemically bond with the material they color, while pigments dont. Pigments generally are longer lasting than dyes and are more resistant to high heat, intense light, weathering and chemical agents.

Pigments are used in paints, inks, plastics, fabrics, cosmetics, and food, among other applications. Dyes are used in many of the same applications as well as textiles. Theyre also used as contrast dyes in magnetic resonance imaging.

Ultrafine grinding is used to process both pigments and dyes. Because of its relationship to particle sizes, surface chemistries and degrees of agglomeration, grinding has a direct effect on the efficacy of pigments and dyes.

high energy ball milling | union process

high energy ball milling | union process

In discussions on high energy ball milling, the more generic term ball mills is often used in place of the terms stirred ball mills or Attritors, but the differences between the types of mills are quite distinct.

In addition, Attritors offer the advantage of being able to take samples at any time and making formulation adjustments during high energy ball milling. Alternatively, ball mills are closed systems and do not offer these advantages. Nevertheless, ball mills can be a more appropriate choice for grinding larger sized material starting at 1/4 or larger. It should be noted that ball mills are much larger than Attritors and therefore require a special foundation.

The Attritors design accounts for much of the difference: conventional ball mills turn the entire drum or tank containing the media and the material, while Attritors stir the media in a stationary tank with a shaft and attached arms or discs resulting in a more efficient use of energy for the milling process. Further, Attritor tanks are all jacketed which allows for more precise temperature control during high energy ball milling.

ball mills losing high & low lube pressure - grinding & classification circuits - metallurgist & mineral processing engineer

ball mills losing high & low lube pressure - grinding & classification circuits - metallurgist & mineral processing engineer

One of our Ball Mills keeps losing pressure on the high pressure pump. It will run fine when starting the Mill and suddenly after a while sometimes 1hrs the pumps will loose pressure. We have just grinded the journal and installed new white metal bearings. After startup this afternoon after about 1hrs the pumps low and high just lost pressure. We have cleaned the whole lube system and filled with new Carter XEP 460 oil. We had in Carter 320 before and had no problem, problems started right after the oil change. We did put in new HP pumps and it lasted 1 day. Please help!

It "sounds" like you have a problem with the oil filter - either by-passing or not meeting the necessary micron spec. I changed to a cheaper filter (Pall) once with the same micron spec as the original, but it wasn't doing the job and I burned out all of the Bosch HP pumps of their kind in North America before the problem was corrected (WIX).

It also could be yourlow PSI pump is cavitating and can't get the oil out fast enough as it it too weak for the new thicker oil you got... check that and maybe alsoincrease the diameter of the pump suction piping to ease the inlet delivery.

That said, the oil change should have prolonged the life of the HP pump, but the viscosity change now points to a more likely suspect - the HP pump is starving and cavitation is destroying the tolerances in the pump internals. If the HP pump is gravity fed (from a separate "clean oil" sump) then it may be necessary to increase the diameter of the pump suction piping to ease the inlet delivery. If the HP pump is fed directly from the LP pumps (via filters), then check the pressure drop across the filter, the setting on the pressure relief valve (may be by-passing), and the suction piping diameter on the LP pumps (they may be cavitating also, or simply not delivering enough volume).

If the bearings have a built-in dynamic wedge, it my not be necessary to keep the lift pumps on when the mill is running (short-term fix perhaps). This dynamic lift could also be relieving the HP pump discharge pressure and exacerbating the cavitation.

Another short or long-term fix may be to revert back to the lower (or an intermediate) viscosity lubricant until the system can be modified to handle the thicker stuff - larger pipes, more suction head (raise sump or lower pump to increase suction head), and perhaps a different HP pump altogether.

And last suggestion, though obvious and likely already considered, the oil level in the reservoir...the marks on the sight glass should indicate "running" and "idle" conditions to account for oil line filling and drain-back. If there is room to bump the level up a bit, this could help with the cavitation.

A single 1" manifold was supplying a 1" suction hose to the LP pump and two 3/4" suction hoses to the HP pumps, starving all 3... I replaced with a 2" manifold and 1 X 1.5" LP and 2 X 1" HP suction hoses - problem solved.

Another indication that your pumps are cavitating is noise - if your pumps are howling, growling, whining or are otherwise abnormally loud, they are probably starving. If you make a change and the pumps get quieter, you are probably onto the solution...

First question is why the oil type change, is it bypassing into tank, what do the filters look like, is there excess oil leaking from the trunnion area and simplest is the rotation correct on the new pump, if grinding took place did the mill trunnion sump get cleaned, not knowing the type of mill this is where we start.

I knowGibraltar had lube pumps and (I call them) dip cups, which were cups attached to the trunnion that would turn with the mill filling with oil pouring over the trunnion as the mill was turning. this is old school.

One final note: Pressure is resistance to flow, so youare saying there is no pressure, that would mean there is no flow which would mean your pump is not pumping. some pump design are made to by pass internally. thats why I ask what type of pump.

The HP pump we are using is a gear pump and the reason for the oil change on the lube from 460 to 320 was that for around 6 years we have used Carter XEP 460 on the fix side and Carter EP 320 on the float side. As we wanted to go to a common oil and recommended by supplier we opted for 460 on both sides. The problem with the HP started straight after we changed to that. As if the pump could not get suction.As we were loosing to much run time trying to sort the problem and obviously running out of pumps I instructed to go for the thinner oil and we had no problem since. Very strange as I do not feel comfortable with this as it does not make sense because the HP runs 100% on the fix side with 460 oil. I definitely like the flooded suction idea as our pump are positioned on top of the tank with a suction pipe leading into the pump from the bottom.

Must add that the instruction was given to keep the tank level full at all times even when running, that could have been one of our problem that the oil level in the tank was low and the pump was making a vortex at the suction but we are still going through all and the help from all are definitely implemented as well.

DISCLAIMER: Material presented on the 911METALLURGIST.COM FORUMS is intended for information purposes only and does not constitute advice. The 911METALLURGIST.COM and 911METALLURGY CORP tries to provide content that is true and accurate as of the date of writing; however, we give no assurance or warranty regarding the accuracy, timeliness, or applicability of any of the contents. Visitors to the 911METALLURGIST.COM website should not act upon the websites content or information without first seeking appropriate professional advice. 911METALLURGY CORP accepts no responsibility for and excludes all liability in connection with browsing this website, use of information or downloading any materials from it, including but not limited to any liability for errors, inaccuracies, omissions, or misleading statements. The information at this website might include opinions or views which, unless expressly stated otherwise, are not necessarily those of the 911METALLURGIST.COM or 911METALLURGY CORP or any associated company or any person in relation to whom they would have any liability or responsibility.

steatite grinding balls (bs-67) | baan machines

steatite grinding balls (bs-67) | baan machines

Steatite grinding balls are used for size reduction of minerals, dyes, pigments, cement paints, printing inks and paints in ball mill grinding and attritors. Steatite ceramic is very hard, low on contamination and has anti-wear properties.

used ball mills | ball mills for sale | phoenix equipment

used ball mills | ball mills for sale | phoenix equipment

Why buy a brand new ball mill when we have high-quality used and refurbished ball mills for sale? Well-made industrial equipment from top manufacturers maintain their value and save your company or industry substantially.

Ball mills are a fundamental part of the manufacturing industry in the USA as well as around the world. Ball mills crush material into various sizes and extract resources from mined materials. Pebble mills are a type of ball mill and are also used to reduce the size of hard materials, down to 1 micron or less.

Because of their fairly simple design, ball mills and pebble mills are less likely to need costly repairs (unlike other crushing or extraction equipment) making them an attractive option for businesses on a budget.

Unused 24 x 41 Polysius EGL Ball Mill. Steel Lined. Twin 7MW Electric Motor Drives, 14MW/11kV Power Supply Unit. Twin Combiflex Fixed Speed Gear Drive. Auxiliary Drive Motors, Lubrication Unit Fixed Bearing and Lubrication Unit Floating Bearing, Frozen Charge Protection System, Vibration Sensors for COMBIFLEX, Dam Ring, Permanent installed Centrifuge for Fixed Bearing, Closed Circuit Chiller Unit, Insurance and Commissioning Spares, Special Tools. Qty 2 Available.

Used 11.5' diameter X 17' long ball mill. Manufactured by KVS (Kennedy Van Saun). 1000 HP open winding synchronous motor. Features trommel discharge and feed tank. Refurbished in 2013, which included installation of new oil jacking system, oil lube system for Babbitt bearings, new titanium steel water jet-machined discharge grates, and motor refurbishment. Set of new babbit bearings available. Previously operated as a closed circuit dry mill with grinding capacity of 40 metric tons per hour with output fineness of >80% passing 200 mesh. Motor operating speed of 15.8 RPM charged with approximately 78 tons of 1", 2" and 3" steel balls. Last used at a phosphate processing facility and in good condition.

Used 8' x 10' Epworth 200 HP jacketed steel ball mill, approximately 8' diameter x 10' long, jacketed chamber, gear and pinion driven with approximately 200 motor drive, on stands, Serial# K-0845.

Used 175HP Hosokawa Alpine Super Orion Continuous Ball mill. Model 195/495 CLKE. Alumina Oxide lined. 195 cm (76")inner diameter x 495 cm (194") long drum, periphery dry discharge with adjustable discharge openings, enclosed discharge housing, direct driven thru gearbox. 175HP 460 volt motor with VFD motor controller. Serial# C1198474. Built 2012.

Used 6' x 8' Paul Abbe jacketed 100 HP steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.

Unused 5' diameter X 6' long Steel Lined Ball Mill, manufactured by Patterson Industries, Type D, non-jacketed, with AR400 steel liners. Includes 30 HP, 3 phase, 60 Hz, 230-460 V, 1725 RPM motor. Mill drive is integrally coupled to horizontal parallel shafted helical gear reducer. Continuous type, with product feeding through spiral inlet trunnion and exiting through the discharge end trunnion. Features cylinder manway access door for cleaning. Internal volume measures approximately 839 USG (112 CF). Mill shell is lined with (24) 1/4" thick liner plates, each head lined with (8) 3/8" thick pie-shaped liner plates. Mounted on stand with approximately 66" clearance between the mill cylinder and floor. Mills were intended for use in glass particle size reduction but were never installed. Manufactured in 2019, units are still in factory plastic wrap and in new condition. (Qty - 2 available)

Used 5 ft. dia. x 6 ft. (Approx 120 Cu.Ft) Patterson Pebble Mill. Alumina brick lining. On stand with 20 HP motor and gear reduced drive with brake. Bull gear and pinion. Babbit bearings. Door is polyurethane and has a drain with plug.

Used 4' x 5' (345 Gallon Total/210 Gallon Working) Ball Mill. Mfg Steveco. Steel Lining. Jacketed. 20 HP (460V/60Hz/3ph) Gear Reduced heavy duty drive on high stands. Solid door and discharge door.

Used Paul O. Abbe One Piece Ceramic Ball Mill, Model JM-300. Non-Jacketed chamber approximate 24.8" diameter x 39.5" long. Vessel volume 300 liter (79 gallons). Approximate 5" charge and discharge port with cover. Driven by a 3 HP, 3/60/208-230/460 volt 1760 rpm motor with a shaft mounted Sumitomo Model 203E-25 reducer. Approximate 32 rpm drum speed. Includes a control panel with an ABB drive. Mounted on a common carbon steel frame legs. Serial # 0830032JM. Built 2008.

Used 28 Gallon Paul O. Abbe Ceramic Jar / Ball Mill. Approximate 3.7 Cubic Feet. Approximate 20" diameter x 20" straight side. Includes motor and cage. Mounted on a carbon steel frame with safety cage.

Used 30 gallon Paul O. Abbe Jar Mill. Porcelain jar 21" diameter x 18" straight side. Driven by 1hp, 1/60/115/230 volt, 1740 rpm motor thru a reducer, ratio 9.3 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#84876

Used 25 Gallon Norton Chemical Process Products Jar Mill. Porcelain jar 20" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1730 rpm motor thru a reducer, no ratio. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial# AV-83104.

Used 35.30 Gallon Paul O. Abbe Jar Mill. Model 5A Porcelain jar 22" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1745 rpm motor thru a reducer, ratio 25 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#A41563.

Unused 24 x 41 Polysius EGL Ball Mill. Steel Lined. Twin 7MW Electric Motor Drives, 14MW/11kV Power Supply Unit. Twin Combiflex Fixed Speed Gear Drive. Auxiliary Drive Motors, Lubrication Unit Fixed Bearing and Lubrication Unit Floating Bearing, Frozen Charge Protection System, Vibration Sensors for COMBIFLEX, Dam Ring, Permanent installed Centrifuge for Fixed Bearing, Closed Circuit Chiller Unit, Insurance and Commissioning Spares, Special Tools. Qty 2 Available.

Used 11.5' diameter X 17' long ball mill. Manufactured by KVS (Kennedy Van Saun). 1000 HP open winding synchronous motor. Features trommel discharge and feed tank. Refurbished in 2013, which included installation of new oil jacking system, oil lube system for Babbitt bearings, new titanium steel water jet-machined discharge grates, and motor refurbishment. Set of new babbit bearings available. Previously operated as a closed circuit dry mill with grinding capacity of 40 metric tons per hour with output fineness of >80% passing 200 mesh. Motor operating speed of 15.8 RPM charged with approximately 78 tons of 1", 2" and 3" steel balls. Last used at a phosphate processing facility and in good condition.

Used 8' x 10' Epworth 200 HP jacketed steel ball mill, approximately 8' diameter x 10' long, jacketed chamber, gear and pinion driven with approximately 200 motor drive, on stands, Serial# K-0845.

Used 175HP Hosokawa Alpine Super Orion Continuous Ball mill. Model 195/495 CLKE. Alumina Oxide lined. 195 cm (76")inner diameter x 495 cm (194") long drum, periphery dry discharge with adjustable discharge openings, enclosed discharge housing, direct driven thru gearbox. 175HP 460 volt motor with VFD motor controller. Serial# C1198474. Built 2012.

Used 6' x 8' Paul Abbe jacketed 100 HP steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.

Unused 5' diameter X 6' long Steel Lined Ball Mill, manufactured by Patterson Industries, Type D, non-jacketed, with AR400 steel liners. Includes 30 HP, 3 phase, 60 Hz, 230-460 V, 1725 RPM motor. Mill drive is integrally coupled to horizontal parallel shafted helical gear reducer. Continuous type, with product feeding through spiral inlet trunnion and exiting through the discharge end trunnion. Features cylinder manway access door for cleaning. Internal volume measures approximately 839 USG (112 CF). Mill shell is lined with (24) 1/4" thick liner plates, each head lined with (8) 3/8" thick pie-shaped liner plates. Mounted on stand with approximately 66" clearance between the mill cylinder and floor. Mills were intended for use in glass particle size reduction but were never installed. Manufactured in 2019, units are still in factory plastic wrap and in new condition. (Qty - 2 available)

Used 5 ft. dia. x 6 ft. (Approx 120 Cu.Ft) Patterson Pebble Mill. Alumina brick lining. On stand with 20 HP motor and gear reduced drive with brake. Bull gear and pinion. Babbit bearings. Door is polyurethane and has a drain with plug.

Used 4' x 5' (345 Gallon Total/210 Gallon Working) Ball Mill. Mfg Steveco. Steel Lining. Jacketed. 20 HP (460V/60Hz/3ph) Gear Reduced heavy duty drive on high stands. Solid door and discharge door.

Used Paul O. Abbe One Piece Ceramic Ball Mill, Model JM-300. Non-Jacketed chamber approximate 24.8" diameter x 39.5" long. Vessel volume 300 liter (79 gallons). Approximate 5" charge and discharge port with cover. Driven by a 3 HP, 3/60/208-230/460 volt 1760 rpm motor with a shaft mounted Sumitomo Model 203E-25 reducer. Approximate 32 rpm drum speed. Includes a control panel with an ABB drive. Mounted on a common carbon steel frame legs. Serial # 0830032JM. Built 2008.

Used 28 Gallon Paul O. Abbe Ceramic Jar / Ball Mill. Approximate 3.7 Cubic Feet. Approximate 20" diameter x 20" straight side. Includes motor and cage. Mounted on a carbon steel frame with safety cage.

Used 30 gallon Paul O. Abbe Jar Mill. Porcelain jar 21" diameter x 18" straight side. Driven by 1hp, 1/60/115/230 volt, 1740 rpm motor thru a reducer, ratio 9.3 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#84876

Used 25 Gallon Norton Chemical Process Products Jar Mill. Porcelain jar 20" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1730 rpm motor thru a reducer, no ratio. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial# AV-83104.

Used 35.30 Gallon Paul O. Abbe Jar Mill. Model 5A Porcelain jar 22" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1745 rpm motor thru a reducer, ratio 25 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#A41563.

Phoenix Equipment is a global supplier of used ball mills. We have new, used and reconditioned ball mills from leading manufacturers, including: Paul O. Abbe Retsch Epworth Patterson Netzsch Newell Dunford Marcy Denver FL Smidth Nordberg Allis Chalmers Metso Hardinge Kurimoto Iron Works Kobe-Allis Chalmers Stevenson Fuller-Traylor Steveco Western Machinery Marion Machine Makrum and more. Ball mills are used in a wide-range of industrial applications: cement processing, paint dyes and pigmentation processing, coal and ore processing, chemical processing and pyrotechnics, and many others. Ball milling has several key advantages over other systems: cost of the grinding medium and installation is generally low works for batch or continuous operation (as well as closed-circuit grinding) suitable for a wide range of materials simple design ensures less repairs Whether you are in the market for a used ball mill for your business or you have a pre-owned ball mill youd like to sell, USA-based Phoenix Equipment can help. Contact us today to learn more about what Phoenix can do for you. Related equipment: Agitators, Screen/Separators, Kilns and Calciners, Scales and Extruders. Fill out our quick and easy quote form for more information about our Ball Mills inventory.

Ball mills are used in a wide-range of industrial applications: cement processing, paint dyes and pigmentation processing, coal and ore processing, chemical processing and pyrotechnics, and many others.

Whether you are in the market for a used ball mill for your business or you have a pre-owned ball mill youd like to sell, USA-based Phoenix Equipment can help. Contact us today to learn more about what Phoenix can do for you.

Phoenix Equipment buys and sells used chemical process equipment and plants for relocation. Our industry focus includes process plants and machinery in the chemical, petrochemical, fertilizer, refining, gas processing, power generation, pharmaceutical and food manufacturing industries. We have extensive experience acquiring processing plants and process lines that require the execution of complex dismantlement, demolition and decommissioning projects. Based in Red Bank, New Jersey, USA, we have team members located in China, India, Germany and relationships throughout the world.

Why Use Phoenix for Your Plant Dismantling & Plant Relocation Needs A Common Plant Liquidation Scenario Your company has made the tough decision to close a plant. This plant was running for years, and the company paid a lot to have it built, paid everyones salaries, and maintained or even modernized all of the production assets over the plants life but the plant needs to be sold off for one reason or another. Your company has called upon you to recover as much dollar as you can to help keep the organization alive, and better yet, healthy, in what is a constant battle in the marketplace. Youve either: Have spent months, maybe even years trying to find a buyer that would operate the plant in place, without any success, while the plants assets lose value every passing day. Or, you cant sell it to another company, as you are one of the few suppliers of the product the plant makes, and you dont want to create a competitor, or improve a competitors position. Or, the plant is on leased propert

Hydrogenation: Major Applications Hydrogenation is a billion-dollar industry. Hydrogenating means to add hydrogen to something. According to Haldor Topsoe, hydrogenation comprises 48% of total hydrogen consumption, 44% of which is for hydrocracking and hydrotreating in refineries , and 4% for hydrogenation of unsaturated hydrocarbons (including hardening of edible oil) and of aromatics, hydrogenation of aldehydes and ketones (for instance oxo-products), and hydrogenation of nitrobezene (for manufacture of aniline). Hydrocracking & Hydrotreating Industrially, hydrotreating and hydrocracking are performed in down flow trickle bed reactors, where the gas and the liquid feed are sent concurrently through a fixed bed plug flow reactor. Although the flow pattern in the reactor can be reasonably approximated, the observed kinetics in such a trickle bed reactor are quite often affected by minor unplanned oscillations in the flow. How the gas and liquid collide and mix together affects the end prod

Thermoplastics A Focus on Polyethylene & Polypropylene Thermoplastics are a class of polymers, that with the application of heat, can be softened and melted, and can be processed either in the heat-softened state (e.g. by thermoforming) or in the liquid state (e.g. by extrusion and injection molding). Over 70% of the plastics used in the world are thermoplastics, and the two most commonly used thermoplastics are both olefins, compound made up of hydrogen and carbon that contains one or more pairs of carbon atoms linked by a double bond. These two olefins are polyethylene and polypropylene. Polyethylene Polyethylene is a tough, light, flexible synthetic resin made by polymerizing ethylene, chiefly used for plastic bags, food containers, and other packaging. It may be of low density or high density depending upon the process used in its manufacturing. It is resistant to moisture and most of the chemicals. It can be heat sealed and is flexible at room temperature (and low temperature), and in additional to its material properties,

color & dye grinding paint mills

color & dye grinding paint mills

Manufacturer of standard & custom wet/dry grinding mills including drug, ink, paint, color & dye grinding mills. Steel ball mills, pebble mills, jar mills & jar rolling mills are available. Services include reconditioning, overhauling & leasing. PEMA affiliated.

Manufacturer of standard & custom oil cake, paint, color, dye & tankage grinding mills. Made of 316 stainless steel materials. Grinding mills include sizing cage & 2 high-speed rotary knives to sweep & cut. Sizing cages are available in different slot combinations for different output particle size distributions. Mills can be used with other equipment to reduce large chunks or lumps to fine powder. Grinding mills are also available in special material construction & in sanitary designs.

Manufacturer of batch mills for pharmaceutical, cosmetic, ink, paint, color and dye grinding applications. Fine wet grinding mills are available. Features heating and cooling jacket for pre-melting of waxes polymers and control of heat sensitive dispersions. Materials used include stainless steel and steel alloys. Available with power capacities ranging from 0.75 hp to 20 hp and sizes from 1 L to 500 L. Can be offered with vent valves, sight glasses, covers, tri-clamp fittings, removable and fixed tri-clamp discharge nozzle and air/nitrogen purging options. Maintenance, rebuilding, refurbishing, repair and rental services are available.

Manufacturer of paint, color, & dye grinding mills including wet & dry grinding attritors & small media mills. Attritors are available in production & laboratory models. Wet grinding attritors operate in batch, circulation, or continuous modes. Dry grinding attritors operate in continuous or batch & continuous modes. Small media mills are available in either lab or production models. Mills operate in continuous or circulation modes. Grinding media also available.

Manufacturer and turnkey systems integrator of plastic, sawdust, synthetic resin, wood pulp, paint, color and dye grinding mills. Air classifier, hammer, pin, and powder grinding mills; and table top lab systems are available. Offered in size ranging from 1 hp to 600 hp. Features vary depending upon model. Some features include adjustable particle size, low grinding temperatures, and dust-free environment. Conceptual engineering, installation, structural designing, project and construction management, drafting, plant relocation and acquisition, equipment selection, and refurbishment services are offered. Also a manufacturer of dry grinding machinery. Capabilities including grinding, CNC machining, milling, welding, and short run and large volume production. Industries served include chemical, pharmaceutical, food and minerals. 24/7 support services are available.

Manufacturer of paint, color & dye grinding mills available with 5 L to 250 L chambers & single & variable speed agitators for tip speeds to 16 m/c. Paint, color & dye grinding mills include water-jacketed milling vessel, explosion resistant motors & controls, high flow screen media separation, motor starters, operator controls, programmable logic controllers, chamber baffle system & process feed pump.

Manufacturer of mills for ink grinding, paint, color & dye grinding applications. Mills are designed for primary particle size reduction & particle deagglomeration for various solid in liquid dispersions. Alternative rotor & stator design can be installed on site for colloid mill adaptations. Mills have numerous base mounting configurations with product outlet connection which rotates 360 degrees. Mills are stainless steel constructed & optional motor available for sanitation & cleaning. Options available include base mounting configuration & product outlet connections. Specifications include 7000 fpm speed with flow rate ranging from 0 gph to 9,000 gph. Applications include inks, lubricants, textile colorant, photographic emulsions, dye dispersion & waterproofing emulsions. Industries served include biotechnology, cosmetics, beverage & chemical. USDA, FDA & 3A compliant.

Manufacturer of ink grinding and paint, color and dye grinding mills. Immersion mills featuring rapid recirculation milling technology, immersion mills for nanoparticle production, immersion mills with upper auger and interchangeable scraper blades, drum mills and laboratory micro mills are available. Mill options include maintenance cart and auto process control system. Mill options include maintenance cart and auto process control system. Capabilities include customizing, testing and equipment refurbishing.

Manufacturer of sanitary toll processing & precision jet milling equipment for high-purity & abrasive compounds. Mill are available with a variety of low friction & wear resistant materials. FDA registered cGMP facility. ISO 9001:2008 registered.

Distributor of used & surplus grinding mill equipment including carbon, face powder, paint color, dye, glue & gelatin grinding mills. Additional types include hammer mills, hammer/knife mills, colloid mills, vertical media/pearl mills, ceramic pebble mills, pin mills & laboratory pin mills. Buy & sell surplus equipment.

Distributor of used & rebuilt grinding mills including synthetic resin, paint, color & dye grinding mills. Types of mills include ball mills, colloid mills, hammer mills, knife mills & roll mills. Ball mill features 6 in. dia. discharge port with locking clamp closure, mounted on factory stand unit dimension of 20 in. dia. x 22 in. dia. & overall dimension of 64 in. W x 45 in. H x 3 in. D. Services include rebuilding, remanufacturing, custom modification of machinery, in-plant removal of used equipment, liquidation, appraisal & consignment services.

Manufacturer & designer of mills for grinding various materials including paint, color, dye, face powder & fertilizer. Available in horizontal & vertical models. Specifications of mills include 55 in. L x 24 in. W x 46 in. H to 207 in. L x 114 in. W x 136 in. H size, 15 hp to 750 hp motor, 900 rpm to 7,500 rpm speed, 400 scfm to 25,000 scfm airflow & 100 lbs./hour to 7,000 lbs./hour water evaporation capacity. Various features include carbon steel or stainless steel construction, built-in fans, adjustable air intake ports, heavy duty top & bottom bearings & dynamically balanced rotor assembly.

Custom manufacturer of mills for paint, color & dye grinding & mixing applications. Mills are available in various models with specifications including three phase, 60 Hz & 230 V to 575 V, 0.75 hp to 40 hp motors, 0.875 in. to 6.250 in. rotor diameters, 3,600 rpm to 10,000 rpm speed, 3,665 ft./minute to 6,120 ft./minute tip speed, 16 in. to 85 in. immersion rates & 63 gpm to 1,730 gpm flow rates. Mills are available with shear-adjustable rotors & stators & dual mode features & are capable of handling powders & re-suspended settled solids. Sealed bottom & top entry mills are also available.

Distributor of mixing & dispersing blades, grinding & polishing medias, & equipment including grinding & mixing filtering, sieving & classifying, environmental, filling & pumping. Mixing & dispersing blades are available in a wide variety & materials include stainless steel, various hard coated polymers & other alloys. Decorative glass & beads. Types of grinding & polishing medias include polystyrene, polyamid, PMMA, polycarbonate, polyurethane, sand, soda lime glass, low alkali glass, flint pebbles, steatite, mullite, alumina toughened, satellites, cylinders, naturals & beeds, soda lime & low alkali glass, steel shots, wires, spheres, & beads. Various types of grinding & polishing medias are available for particle size reduction, de-agglomeration, & de-burring applications. Abrasion resistant parts can be custom made from materials including polymers, ceramics, & metals or combinations. Technical assistance is available for selection of products based on application.

Worldwide Manufacturers Of Mixing, Blending & Dispersion Equipment For The Process Industries. Double Planetary Mixers, VersaMix, PowerMix, Mixer Emulsifiers, Three Roll Mills, Ribbon & Vertical Cone Screw Blenders, Turbo-emulsifier Agi-Homo Mixers, Kneader Extruder Sigma Blade Mixers, Motionless (Static) Mixers, Discharge Systems, Tanks, Reaction Vessels, Pressure Vessels, Custom Fabrication & Control Systems. For High/Low Shear, High/Low Viscosity Mixing, Blending, Dispersion, Emulsification, Homogenization, De-agglomeration & Disintegration, Particle Size Reduction & Vacuum Drying. Laboratory Through Pilot Plant & Production Capacities

Custom manufacturer of grinding mills for paint, color & dye applications. Grinding mills are available in various models with specifications including 26 in. x 30 in. x 44 in. to 80 in. x 89 in. x 50 in. dimension, 0.11 cu. ft. to 2.5 cu. ft. hopper capacity, 7.8 sq. in. to 840 sq. in. screen area, 10 cfm to 750 cfm air flow, 21,000 ft./minute hammer tip speed, 3,450 rpm to 14,000 rpm maximum rotor speed, 5 in. to 24 in. rotor dia., 3/4 hp to 200 hp motor, 65 lbs./hour to 12,800 lbs./hour capacity & 1/2 hp to 25 hp approximate idle load. Features include rotor assembly with swing or fixed hammers, cover for holding multi-deflector liner & retaining screen.

Manufacturer of mills for any output capacity needs, from testing the quality of incoming materials to large outputs. Manufacturing open as well as sealed models with batch outputs varying from 10 to 800 gallons per hour.

Manufacturer of micro mills used for drug, ink, paint, color & dye grinding applications. Features include 5 liter hopper, vibratory feeder with adjustable hatch & cloth sack for dustless collection. Available with four milling speeds. Applications include grinding of wet, semi-hard, dry, sticky & heat sensitive products, chemicals, foodstuffs, vegetables, animal derived products, spices, minerals & wastes.

Used Equipment Broker, Plant Liquidator, AMEA Certified Appraiser, Joint Ventures; Specializing In Chemical, Plastic, Rubber & Related Processing Machinery & Equipment. Agitators, Autoclaves, Blenders, Boilers, Hot Oil Heaters, Centrifuges, Compressors, Blowers, Classifiers, Dispersers, Dissolvers, Dryers, Evaporators, Extruders, Flakers, Filter Presses, Filter Pressure Leaf, Homogenizers, Heat Exchangers, Condensers Kettles, Laboratory Testing Equipment, Material Handling Equipment, Ball & Pebble Mills, Paint & Ink Mills, Pulverizers, Mixers, Ovens, Packaging Plastic Granulators, Hydraulic Presses, Pumps, Reactors, Screens, Tanks, Vacuum Pumps, Versators & Other Misc. Equipment

Manufacturer of colloid grinding mills for oil, ink, and paint applications. Specifications include 200 psi operating pressure and 0.25 to 100.00 gph flow rate. Available with removable bearing and seal chamber, double flush seal, insertable stator, PLC control, and inlet feed pump features. Also offers rental services. Serves the chemical industry. Meets EHEDGE and 3A standards.

Laboratory Equipment For The Preparation Of Solid Samples: Retsch Mills, Pulverizers, Homogenizers, & Crushers, Sample Dividers, Sieves, Sieve Shakers & Optical Particle Sizers, Dryers, Feeders, Cleaners

Manufacturer of Micronizer, Simpactor & Powderizer mills, classifiers, pulverizers, crushers, blenders & other equipment for grinding & processing pigments, paints, colors & dyes. Services include sample evaluation, field service, reconditioning & parts.

Stainless steel fabricators of mixing equipment including, dispersers, kneader extruders, control systems, vertical blenders, homogenizers, tanks & vessels. Serving the food, chemicals, cosmetics, adhesive & sealant & pharmaceutical industries.

Copyright 2021 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions, Privacy Statement and California Do Not Track Notice. Website Last Modified July 7, 2021. Thomas Register and Thomas Regional are part of Thomasnet.com. Thomasnet Is A Registered Trademark Of Thomas Publishing Company.

Related Equipments