There are several types of briquette machines with different working principles, they work on different pressures and suitable for different materials. So how they workdifferently? What are there advantage and disadvantages? Lets follow the article.
A briquette machine is used to turn the waste powder to a regular shape block, which can help to improve the conditions for those powder, make them easy for transportation, storage, and more useful for further usage.
Briquetting work always work with the binder as it needs the binding effect to get enough strength for the finished briquette. Biomass and industrialwaste are different from each other due to their binder sources.
The heating system is a special design for those briquettersdeal with materials contain lignin, lignin alway can be found on biomass. So theheating system is usually used for biomass briquetting. Other materials like coal, charcoal, etc. Binders are always needed when briquetting with the screw type briquette machine.
The suitablematerial is fed to the hopper and then conveyed by the screw inside the briquette machine.the rotating screw takes the material from the feed port, and compacts it against a die which assists the build-up of a pressure gradient along the screw.
As the screw briquette machine works with a pressure not that high, binders are always needed forming the briquette. Equip with a heating system will help the biomass material melt the internal lignin and turn it to a high-performance binder. Besides, other materials also work with this briquetterlike coal, charcoal, etc. These materials should be well mixed with the binder to get the briquette forms.
The briquette working process is in a chamber where materials are fed into, there materials are briquetting under a very high pressure. It causes theirplasticity and makes them binding stably together as a block.
Hydraulic type takes a long pressure keeping time on the briquette, this prevents theshort-time material deformation rebound and will cause a special heating for those materials like sawdust for melting its internal lignin, make the briquette with higher strength.
The piston type uses the rotary power of the mechanical device or the thrust of the hydraulic cylinder to reciprocate the piston (or the plunger), and the piston (or plunger) drives the ram to reciprocate in the forming sleeve to generate a pressing force to form the material to briquette.
A big pressure will be generated as the movement of the flywheel and punch the briquette time after time in a short time, it raises the temperature of the raw material. As the raw material moves, it fractionates with the inside, another kind of heat friction heat generates. With the action of these two kinds of heat, material raises its own temperature to a high level and melt the lignin. Particle materials then bind together and become strong enough.
Roller press works with two close rotating rollers at the same speed butwith opposite direction. The two rollers, with the same width and diameter, have holes on the surface. When they move, the same two holes on the different roller will coincide at the intersection of the midline and the briquette will be pressed there.
A normal roller press will use a wedge iron to fix the movable roller as it works on a low pressure. The hydraulic pump station is also can be used to fix the roller and supplies a much bigger but flexible support to the roller to work stable on big pressure.