Costs should not be the only factor to be considered, when evaluating a briquetting plant. For newcomers in the business of biomass, production might not seem complicated. Never the less, it is our experience that two customers with similar raw material can have a very different success rate in terms of profitability.
Briquetting is a way to make use of biomass residues that would otherwise go to waste, and replace the use of wood and charcoal (often produced unsustainably) as well as fossil fuels, thus cutting greenhouse gas emissions.
Briquetting is a compaction technology that has been around for many years. Fines are pushed into the nip of two counter-rotating wheels using a screw or gravity feeder. High hydraulic pressure is applied and the rotating wheels compress the feed between the pockets to form briquettes. Unlike pelletization, briquetting does not always require a binder, but generally some amount of molasses, starch, or tar pitch is used. A traditional application for briquetting is the agglomeration of coal.
Most applications of briquetting in the iron and steel industry involve waste materials, such as mill scale and process dusts, sludges, and filter cakes . In the DR industry, a number of facilities briquette their hot DRI product to produce a higher-density product for safer shipping. This material is known as HBI (hot briquetted iron), as discussed in Section 1.2.3.
Briquetting machines, with dies and punches, driven by a single bullock, have been developed by the School of Applied Research in Maharashtra, India. They cost about US$ 2400 each. The machine is very sturdy but the problem is the limited maximum production 25 kg/hr and the price of the equipment.
The same school has also developed a briquetting machine with two plungers driven by a 3 horse powermotor. The maximum capacity is 100 kg/hr and the price about US$ 4000. However, the pressure on the briquettes is not very high and it is necessary either to use a binder or to handle the briquettes with great care.
GAKO-Spezialmaschenen in West Germany produces briquetting equipment that uses the piston extruder compacting method and produces good quality briquettes because of the high pressure although this results in higher prices and power consumption. A 150 kg/hr machine costs about US$ 12 900 and a 60 kg/hr machine about US$ 8800 and requires a power load of 8.5 kW.
T & P Intertrade Corporation Ltd in Thailand markets a press-screw system briquetter that heats the agro-waste before compression. This means that good briquettes can be produced without needing a binder and at lower pressure, resulting in cheaper equipment. Their Ecofumac has a capacity of about 150 kg/hr, needs a 15 hp motor and three 2000 watt heaters and costs about US$ 5850. The grinder needs a 5 hp motor. Unfortunately a lot of energy is used by the heaters and there have also been some problems with other components.
It can be seen, therefore, that even if equipment does exist, the problems are not totally solved. Either equipment is too expensive with little capacity and too high an energy use, or poor quality briquettes result. There is still a need for a medium-size briquetting machine that is inexpensive, easy to operate, repairable using local tools and commonsense, energy efficient, reliable and which can handle different types of raw material. The advantage of medium-sized equipment is that capital investment is low and mechanized drying and special storage space is not required. In addition it would be practical for use in villages and in places with small wood industries or small agro-industries like groundnut oil mills, sugar mills, saw mills and paper mills. The briquettes could be used locally in bakeries, brickworks, potteries, curing houses, breweries, drieries or simply for cooking.
Briquetting is like pelletising a process in which the raw material is compressed under high pressure, which causes the lignin in the wood or biomass to be liberated so that it binds the material into a firm briquette.
The most appropriate water content in the raw material for briquetting varies and depends on the raw material. However, the normal water content is between 6% and 16%. If the water content is over 16% the quality of the briquettes will be reduced, or the process will not be possible.
There are hydraulic presses for small capacities from 50 to 400kg/hour. The raw material is fed into the press by a time-controlled dosing screw, which means that it is the volume of the raw material and not the weight, which is controlled. Briquettes have a fairly good uniform length (square briquettes) and they are mainly used by domestic consumers.
Mechanical presses are available with capacities from 200kg/hour up to 1800kg/hour. Briquettes from these presses are normally round and short and they are used in heating plants for larger industries and for district heating plants. A mechanical press is built like an eccentric press. A constantly rotating eccentric connected to a press piston presses the raw material through a conic nozzle. The required counter pressure can be adjusted only by using a nozzle with a different conicity. A mechanical press receives raw material from a speed-controlled dosing screw. The speed of the dosing screw determines the production rate of the press. A change in the specific gravity of the raw material will change the hardness of the briquettes. A mechanical briquetting press will produce a long length of material a briquette string which, however, breaks into random lengths depending on the binding capacity of the raw material. A saw or cutter is used to cut the briquette string into briquettes of uniform length.
The briquette string pushed out of the press is very hot because of the friction in the nozzle. The quality of the briquettes depends mainly on the cooling and transport line mounted on the press. A cooling/transport line of at least 15m is recommended for wood briquettes. The longer the time a briquette remains in the cooling line the harder it will become. Cooling lines up to 50m long are common.
Biomass briquetting technology can compress some biomass raw materials, such as wood shavings, sawdust, crop straw, and other solid waste biomass fuel through pressurizing and heating. It is conducive to the transportation, storage and combustion and can largely improve the efficiency of combustion and fuel utilization. At present, there are three main types of solid shaping, including screw extrusion, piston punch, and roller forming.
Thermochemical conversion involves biomass structure degradation with oxygenic or anoxygenic atmosphere at high temperature . It includes three kinds of technology, namely biomass gasification, biomass pyrolysis, and direct liquefaction.
Biomass gasification is a chemical reaction process that reacts with gasifying agent (air, oxygen, and water) at high temperatures in gasifiers. The main problem of biomass gasification technology is that the tar obtained in the gasification of gas is difficult to purify, which has become the main factor restricting the biomass gasification technology.
Pyrolysis is a thermal process in which the organic polymer molecules in the biomass are quickly broken into short chain molecules, coke, bio-oil and noncondensable gas in the absence of oxygen or a small amount of oxygen under high temperatures. Biomass liquid fuel could provide an alternative to petroleum up to a certain extent. After some modification, industrial oil fired boilers and internal combustion engines can use bio-oil as fuel directly.
Burning biomass to obtain heat energy, as a direct utilization mode, has been more and more widely employed based on the mature experiences during development of fossil fuel power plants. When biomass is used as the boiler fuel, its thermal efficiency is close to the level of fossil fuels. Compared with fossil fuels, for example, coal, biomass fuel contains more hydrogen element, is more volatile, and has less carbon and sulfur content.
Bioconversion technology of biomass refers to the process by which microorganisms produce high-grade energy through biochemical action with agricultural and forestry wastes. Anaerobic fermentation and ethanol fermentation are the two main conversion types. With the help of anaerobic bacteria, organic matter can be converted to combustible gas, for example, methane under a certain temperature, humidity, pH, and anoxygenic conditions. The ethanol is produced by microzyme with the carbohydrate hydrolyzed by enzymes.
Renewed interest in briquetting coal has arisen because of (i) the increasing amounts of fine coal being generated in mining and preparation which are stockpiled or disposed of in tailings dams and lead to uneconomic land use and environmental problems; (ii) the need for easily handled and convenient coal products; and (iii) the demand for smokeless solid fuels.
Briquette quality depends on composition (type of coal and binder), particle sizes and processing conditions. In this study various data are presented on the influences of such factors on mechanical strength and water resistance of briquettes formed from high rank coals using a molasses/lime binder alone and also including bagasse. These data relate to Hardgrove grindability index (HGI), coal size, moisture and curing time.
White Energy developed the BCB technology at pilot scale in Australia, after initial work by CSIRO. In partnership with Bayan Group, White Energy formed PT Kaltim Supa Coal, and constructed a commercial scale 1 Mtpa plant at Tabang in East Kalimantan. The BCB process takes 4200 kcal/kg GAR feed and produces a 6100 GAR product. Its difference from Kobelcos UBC process is that BCB does not use any binder to reconstitute the dried product.
This project has been terminated due to commercial differences between the partners. The financial model used a sub-20 coal price delivered from mine mouth to plant. Bayan Group changed the price to follow the Indonesian Reference Price which more than doubles the feedstock cost. The parties are in negotiations to settle the dispute (White Energy, 2011).
Generally, briquette manufacture (briquetting) involves the collection of combustible materials that are not usable as such because of their low density, and compressing them into a solid fuel product of any convenient shape that can be burned like wood or charcoal. Thus the material is compressed to form a product of higher bulk density, lower moisture content, and uniform size, shape, and material properties. Briquettes are easier to package and store, cheaper to transport, more convenient to use, and their burning characteristics are better than those of the original organic waste material.
The raw material of a briquette must bind during compression; otherwise, when the briquette is removed from the mold, it will crumble. Improved cohesion can be obtained with a binder but also without, since under high temperature and pressure, some materials such as wood bind naturally. A binder must not cause smoke or gummy deposits, while the creation of excess dust must also be avoided. Two different sorts of binders may be employed. Combustible binders are prepared from natural or synthetic resins, animal manure or treated, dewatered sewage sludge. Noncombustible binders include clay, cement, and other adhesive minerals. Although combustible binders are preferable, noncombustible binders may be suitable if used in sufficiently low concentrations. For example, if organic waste is mixed with too much clay, the briquettes will not easily ignite or burn uniformly. Suitable binders include starch (5%10% w/w) or molasses (15%25% w/w) although their use can prove expensive. It is important to identify additional, inexpensive materials to serve as briquette binders in Kenya and their optimum concentrations. The exact method of preparation depends upon the material being briquetted as illustrated in the following three cases of compressing sugar bagasse, sawdust, and urban waste into cooking briquettes.
Rural villages in developing countries are connected to the drinking water supply without a sewer system. Other places in urban and semi-urban communities have no sewage treatment networks. Instead under each dwelling there is a constructed septic tank where sewage is collected or connected directly to the nearest canal through a PVC pipe. Some dwellings pump their sewage from the septic tank to a sewer car once or twice a week and dump it elsewhere, usually at a remote location.
In general, a huge amount of sewage and solid waste, both municipal and agricultural are generated in these villages. Because of the lack of a sewer system and municipal solid waste collection system, sewage as well as garbage are discharged in the water canals. This and the burning of agricultural waste in the field cause soil, water, and air pollution as well as health problems. Some canals are used for irrigation, other canals are used as a source of water for drinking.
Rural communities have had agricultural traditions for thousands of years and future plans for expansion. In order to combine the old traditions with modern technologies to achieve sustainable development, waste should be treated as a byproduct. The main problems facing rural areas nowadays are agricultural wastes, sewage, and municipal solid waste. These represent a crisis for sustainable development in rural villages and to the national economy. However, few studies have been conducted on the utilization of agricultural waste for composting and/or animal fodder but none of them has been implemented in a sustainable form. This chapter combines all major sources of pollution/wastes generated in rural areas in one complex called an eco-rural park (ERP) or environmentally balanced rural waste complex (EBRWC) to produce fertilizer, energy, animal fodder, and other products according to market and need.
The idea of an integrated complex is to combine the above-mentioned technologies under one roof, a facility that will help utilize each agricultural waste with the most suitable technique that suits the characteristics and shape of the waste. The main point of this complex is the distribution of the wastes among the basic four techniques animal fodder, briquetting, biogas, and composting (ABBC) as this can vary from one village to another according to the need and market for the outputs. The complex is flexible and the amount of the outputs from soil conditioner, briquettes, and animal food can be controlled each year according to the resources and the need.
Based on the above criteria, an environmentally balanced rural waste complex (EBRWC) will combine all wastes generated in rural areas in one complex to produce valuable products such as briquettes, biogas, composting, animal fodder, and other recycling techniques for solid wastes, depending upon the availability of wastes and according to demand and need.
The flow diagram describing the flow of materials from waste to product is shown in Figure 7.2. First, the agricultural waste is collected, shredded, and stored to guarantee continuous supply of waste into the complex. Then according to the desired outputs the agricultural wastes are distributed among the basic four techniques. The biogas should be designed to produce enough electrical energy for the complex; the secondary output of biogas (slurry) is mixed with the composting pile to add some humidity and improve the quality of the compost. And finally briquettes, animal feed, and compost are main outputs of the complex.
The environmentally balanced rural waste complex (EBRWC) shown in Figure 7.3 can be defined as a selective collection of compatible activities located together in one area (complex) to minimize (or prevent) environmental impacts and treatment cost for sewage, municipal solid waste, and agricultural waste. A typical example of such a rural waste complex consists of several compatible techniques such as animal fodder, briquetting, anaerobic digestion (biogas), composting, and other recycling techniques for solid wastes located together within the rural waste complex. Thus, EBRWC is a self-sustained unit that draws all its inputs from within the rural wastes achieving zero waste and pollution. However, some emission might be released to the atmosphere, but this emission level would be significantly much less than the emission from the raw waste coming to the rural waste complex.
The core of EBRWC is material recovery through recycling. A typical rural waste complex would utilize all agricultural waste, sewage, and municipal solid waste as sources of energy, fertilizer, animal fodder, and other products depending on the constituent of municipal solid waste. In other words, all the unusable wastes will be used as a raw material for a valuable product according to demand and need within the rural waste complex. Thus a rural waste complex will consist of a number of such compatible activities, the waste of one being used as raw materials for the others generating no external waste from the complex. This technique will produce different products as well as keep the rural environment free of pollution from the agricultural waste, sewage, and solid waste. The main advantage of the complex is to help the national economy for sustainable development in rural areas.
A collection and transportation system is the most important component in the integrated complex of agricultural waste and sewage utilization. This is due to the uneven distribution of agricultural waste that depends on the harvesting season. This waste needs to be collected, shredded, and stored in the shortest period of time to avoid occupying agricultural lands, and the spread of disease and fire.
Sewage does not cause transportation problems as it is transported through underground pipes from the main sewage pipe of the village to the system. Sewage can also be transported by sewage car which is most common in rural areas since pipelines may prove expensive.
Household municipal solid waste represents a crisis for rural areas where people dump their waste in the water canals causing water pollution or burn it on the street causing air pollution. The household municipal solid waste consists of organic materials, paper and cardboard, plastic waste, tin cans, aluminum cans, textile, glass, and dust. The quantity changes from one rural community to another. It is very difficult to establish recycling facilities in rural areas where the quantities are small and change from one place to another. It is recommended to have a transfer station(s) located in each community to separate the wastes, and compact and transfer them to the nearest recycling center as explained in Chapter 5. The transfer station consists of a sorting conveyer belt that sorts all valuable wastes from the organic waste, which is then compacted by a hydraulic press. The collected organic waste can be mixed with other rural waste for composting or biogas as explained above.
The outputs of the EBRWC are valuable and needed goods. EBRWC is flexible and can be adjusted with proper calculations to suit every village; moreover inputs and outputs from the complex can be adjusted every year according to the main crops cultivated in the village, which usually varies from year to year. The key element to the success of this solution lies in the integration of these ABBC technologies to guarantee that each type of waste is most efficiently utilized.
The four corner stone technologies for agricultural waste are animal fodder, briquetting, biogas, and composting (ABBC technologies). These technologies can be developed based on demand and need. In principal three agricultural waste recycling techniques can be selected to be the most suitable for the developing communities. These are animal fodder and energy in a solid form (briquetting) or gaseous form (biogas) and composting for land reclamation. There are some other techniques, which might be suitable for different countries according to the needs such as gasification, fiber boards, pyrolysis, etc. These techniques might be integrated into a complex that combine them altogether to allow 100% recycling for the agricultural waste. Such a complex can be part of the infrastructure of every village or community. Not only does it allow to get rid of the harms of the current practice of agricultural waste, but also of great economical benefit.
The amount of agricultural waste varies from one country to another according to type of crops and farming land. These waste occupies the agricultural lands for days and weeks until the simple farmers get rid of these waste by either burning it in the fields or storing it in the roofs of their houses; the thing that affects the environment and allows fire villages and spread of diseases. The main crops responsible for most of these agricultural wastes are the rice, wheat, cotton, corn, etc. These crops were studied and three agricultural waste recycling techniques were set to be the most suitable for these crops. The first technology is animal fodder that allows the transformation of agricultural waste into animal food by increasing the digestibility and the nutritional value. The second technology is energy, which converts agricultural wastes into energy in a solid form (briquetting) or gaseous form (biogas). The briquetting technology that allows the transformation of agricultural waste into briquettes that can be used as useful fuel for local or industrial stoves. The biogas technology can combine both agricultural waste and municipal waste water (sewage) in producing biogas that can be used in generating electricity, as well as organic fertilizer. The last technology is composting, that uses aerobic fermentation methods to change agricultural waste or any organic waste into soil conditioner. The soil conditioner can be converted into organic fertilizer by adding natural rocks to control N: P: K ratio, as explained before. Agricultural waste varies in type, characteristics and shape, thus for each type of agricultural waste there is the most suitable technique as shown in Figure 13.28.
A complex combining these four techniques is very important to guarantee each waste has been most efficiently utilized in producing beneficial outputs like compost, animal food, briquettes and electricity. Having this complex will not only help the utilization of agricultural waste, it will help solving the sewage problem as well that face most of the developing countries, as a certain percentage of the sewage will be used in the biogas production and composting techniques to adjust carbon to nitrogen ratio. An efficient collection system should be well designed to collect the agricultural waste from the lands to the complex in the least time possible to avoid having these wastes occupying agricultural land. These wastes are to be shredded and stored in the complex to maintain continuous supply of agricultural waste to the system and in turns continuous outputs.
Our briquetting machines can be used for many applications, where the best known are briquetting lines for consumer logs and industrial boilers. Lately, we have been delivering many lines for the production of briquettes from agricultural residues. More specialized applications include briquette lines for MDF, Wood fines, bedding for animals and briquettes for biogas. The latest addition includes the production of briquettes for the production of carbonized briquettes. Take a look at some of our cases.
Consumer wood briquettes are the ideal products for replacing traditional firewood. Since the end of the 90s, the demand for consumer wood briquettes used for home heating systems, fireplaces and wood burning stoves have increased. Driven by the global focus on renewable energy, this demand is still growing. Compared to alternatives, briquettes are both convenient, profitable and sustainable.
With our briquetting machines, your waste will be turned into valuable renewable energy. In collaboration with our sister company RUF Briquetting System, we offer a wide range of customized solutions and a full line of consumer briquetting machines varying from low to very high capacities.
At C.F. Nielsen, we have specialized in mechanical briquetting. We offer high capacity lines ranging from 4-500 kg/hour and upwards, corresponding to wood waste of approximately 1.000 tonnes per year and more.
Testing of your raw material is essential, as raw material, even if it is the same species, varies from country to country and from customer to customer. By testing your actual raw material many potential difficulties will be avoided during start-up and production at your new briquetting plant.
Costs should not be the only factor to be considered, when evaluating a briquetting plant. For newcomers in the business of biomass, production might not seem complicated. Never the less, it is our experience that two customers with similar raw material can have a very different success rate in terms of profitability.
The moisture content of wood changes the calorific value of the latter by lowering it. Part of the energy released during the combustion process is spent in water evaporation and is consequently not available for any wished-for thermal use.
Raw material is the residue you are looking to use in your briquetting production. It is typically unprocessed material from either from wood or agricultural by-products. Examples such as straw, pineapple waste, sugarcane bagasse, birch, larch etc. can be used for briquetting.
The calorific or heating value is an important indicator of the quality of the pressed fuel briquettes. It measures the energy content of the briquettes. It is defined as the amount of heat evolved when a pressed fuel briquette is completely burnt and the combustion products are cooled. And the Gross Calorific Value, shortened as GCV, refers to the calorific value with the condensation of water in the latent heat, also known as higher heating value. Whereas during combustion, the heat of condensation of water contained in the fuel and formed during combustion will become unavailable because of the vaporization of the water. And then, the useful heating value is gained after the heat of condensation of the water being subtracted from the gross calorific value, which is referred to as the Net Heating Value or lower heating value.
Due to low level of lignin, it is not possible to make briquettes in bigger diameter than 75 mm without adding any binder. Although rice husks are perfect for briquetting, they also contain a high silica content, resulting in a high ash content. Briquettes from rice husk are most often used in boilers or furnaces with very high burning temperature to avoid a low silica melting point and sintering (crystallization) of ash.
Biomass briquettes are a biofuel substitute to coal and charcoal. Briquettes are mostly used in the developing world, where cooking fuels are not as easily available. There has been a move to use briquettes in the developed world, where they are used to heat industrial boilers in order to produce electricity from steam. The briquettes are co-fired with coal in order to create the heat supplied to the boiler.
Use of industrial waste as raw material for briquetting.Briquetting process can improve handling and transporting of solid waste.Mixing residues for briquettes production can optimize their characteristics.Reuse of industrial waste can ensure sustainable production and minimizing environmental impacts.
The biosludge was mixed with cotton textile industry residues in ratios of 0, 25, 50, 75 and 100% and briquettes were manufactured in a lab-scale machine at three compaction pressures 6205, 8274 and 10342kPa. The heating value, chemical characteristic, density, resistance to compression and hygroscopic moisture equilibrium were analyzed. The compaction pressure of 6205kPa proved ideal for the briquetting process in the laboratory scale because in this pressure the briquettes had the higher percentages of fixed carbon, high heating value and compressive strength, and the lowest ash content. Pressure had no effect on density and hygroscopic equilibrium moisture content of the briquettes. The best mixing proportion between the two residues was 25% of sludge because, with this percentage, it is possible to obtain briquettes with high contents of volatile matter, fixed carbon, higher heating value, density and compressive strength, and lower ash content and hygroscopic equilibrium moisture. It was possible to conclude that the mixing of residues for the production of briquettes can optimize their physical-chemical and mechanical characteristics depending on the mixing ratio used.
The investment of charcoal factory is little cost and high return because of its economic benefits and social benefits. So, you may are planning to have your own charcoal factory recently. But, I have to tell you that the investment can not be successful with your impulsion. You must investigate overall and have full preparation.
Here have some introduction about the preparation for establishing charcoal production plant. First step: Choose the Site of the Charcoal Briquetting Factory. You should select the size of the site according to the fund you prepare to invest. The briquette machine and carbonization furnace need 25~30 square meters and the storehouse need 30~40 square meters. There may have 1 or 2 offices too. Other factors you need to consider are as follows.
1, The site should far away from the residential area. That is because that there may produce massive smoke during the operation process. And the power needed is 380v. 2, The site had better have plenty of water to use in case that the factory may catch fire when the machine is working. 3, The site should be close to the place you get your raw material. This can reduce the cost that paid to transport the material. And the place had better have plenty of material so you will not interrupt your production because of lack of material.
Second step: Select your equipment. The charcoal production line include four main equipment: crusher, dryer, briquette making machine and carbonization furnace. And it is the most important step to select them. The equipment should have the features of high efficiency, energy saving, low noise, low consumption, easy installation, easy operation and easy maintenance. And at least two worker to operate them. Amisy is a professional supplier of biomass briquetting machines and carbonization furnace, and our machine are high quality and competitive. Please feel free to contact us.
Third step: Train Your Workers Many. people may neglect this factors. However, this step is very important. There may have little difference between different manufacturer, but how you operate them and whether maintain them may cause difference of the products. As briquetting plant manufacturer, we should take responsibility for providing free training class for our customers. With proper operating method, the charcoal briquette machine will have a much better performance, accordingly reduce biomass briquetting plant cost and machine maintenance cost.
Every year millions of tons of agricultural wastes are generated which are either destroyed or burnt inefficiently in loose form causing air pollution. These wastes can can be recycled & can provide a renewable source of energy by converting biomass waste into high density fuel briquettes without addition of any binder. This recycled fuelis beneficial for the environment as it conserves natural resources. What many people do not know is that recycling also prevents global warming which has a direct adverse impact on global climate.
Fuel is prime need of every industry & pollution free environment is the primeconcern of society. Serving both the purposesLEHRAFuel-Tech Pvt. Ltd.is a reputed & leading Indian company engaged in manufacturingand marketing offor renewable and non- conventional energy equipment i.e.BRIQUETTING PLANTS& MACHINERYfor converting agro-forestry waste into White coal; Bio-mass basedBriquetting System& other energy equipments. Since our inception we had manufactured & exported more than 1200 nos. of Briquetting Plants. Our company is in approved list of SuppliersofIREDALtd. (A Govt. of Indias leading Financial Institution).
The Concept: The process of BRIQUETTING is the physical transformation of the loose raw material into high density fuel briquettes through a compactly compressed unit. The form change results in a much higher specific density of the material which increases its Calorific Value (combustion efficiency) as compressed to the loose material. Energy is the key factor in economic development of the country. By the turn of the century our requirement of energy will increase rapidly and resources are limited .which has resulted in the universal recognition of the need to tap renewable energy from non-conventional sources. Biomass briquettes from Agricultural and Forest Wastes is fairly a good substitute for coal, lignite, firewood, crude oil .This recycled fuelis beneficial for the environment as it conserves natural resources. What many people do not know is that recycling also prevents global warming which has a direct adverse impact on global climate.
Almost any biomass can be briquetted. Biomass waste is the material derived from plants that use Photosynthesis to grow which include plant and animal material such as wood from forests, material left over from agricultural and forestry processes, and organic industrial, human and animal wastes.
With the increase in the demand of energy. The natural conventional resources are diminishing very fast. This can be controlled by using non conventional sources like sunlight, wind energy, water energy. But these sources cannot be used as fuel. So the best non conventional fuel is Biomass briquettes. This not only is Socially Economical as well financially very economical.
Biomass Briquetting is done to organic waste, Municipal waste which helps to cleans our surrounding and minimize landfills. It burnts completely so produces less ash and CO2. By utilizing this unwanted waste into energy we save our valuable natural resources of fossil fuel. Biomass waste-to-energy conversion reduces greenhouse gas emissions. The greenhouse gas emissions are significantly reduced by preventing methane emissions from landfills. Moreover, biomass energy plants are highly efficient in harnessing the untapped sources of energy from biomass resources.
Biomass Briquettes are more economical than other fuels because it contains low moisture, low ash high density. Manufacturing briquettes is Profitable as the demand of energy is increasing day by day and vice versa the supply of natural fossil fuel is limited It is very easy for handling, transporting storage. It is cheaper than heavy furnace oil , steam coal fire wood etc. Moreover government of India has also announced series of incentives for promoting this project for installing Briquetting plants. as the entire world is engaged in developing alternative energy sources. it is promoted to the industries as a prime renewable energy project throughout the world. The project gives excellent viability. The total payback period of the project is approx.2 year. It is pollution free and no hazard in this project. It is eco friendly renewable green energy project.
Agricultural waste can be described as all the organic materials which are produced as by-products from harvesting and processing of agricultural crops. These residues can be further categorized into primary residues and secondary residues. Agricultural residues, which are generated in the field at the time of harvest, are defined as primary or field based residues whereas those co-produced during processing are called secondary or processing based residues.
Forest harvesting is a major source of biomass for energy. The largest source of energy from wood is the waste product from the pulp and paper industry called black liquor. Logging and processing operations generate vast amounts of biomass residues. Wood processing produces sawdust and a collection of bark, branches and leaves/needles. A paper mill, which consumes vast amount of electricity, utilizes the pulp residues to create energy for in-house usage. beside Pulp Waste from Paper mills Wood chips and shravings, Tree bark and twings, Saw dust bamboo leaves. Wild grasses. Shrubs Above raw material can be briquettes without using any binder. After making Briquettes from above materials it contains calorific value of 3500-4800 k.cal/kg.
LEHRA FUEL TECH PVT LTDis well known name in Briquetting Plant (Renewable Energy devices) Manufacturing IndustrySince 1988(Located at VPO JAGERA). It is a name synonymous with International Quality of Briquetting Plants.