bucket elevator ne 15 motor power

ne bucket elevator

ne bucket elevator

Model Capacity(m3/h) Max.particlesize(mm) Materialbulkdensity(t/m3) Max.liftingheight(m) MotorPower(kw) NE15 10-15 40 0.6-2.0 35 1.5-4 NE30 18.5-31 55 0.6-2.0 50 1.5-11 NE50 35-60 60 0.6-2.0 45 1.5-18.5 NE100 75-110 70 0.6-2.0 45 5.5-30 NE150 112-165 90 0.6-2.0 45 5.5-45 NE200 170-220 100 0.6-1.8 40 7.5-55 NE30 230-340 125 0.6-1.8 40 11-75 NE400 340-450 130 0.6-1.8 30 18.5-90 NE500 450-550 140 0.6-1.8 30 30-110 NE600 550-660 150 0.6-1.8 30 37-132 NE800 680-830 165 0.6-1.8 30 37-160

plate chain bucket elevator

plate chain bucket elevator

OverviewNE Bucket elevator is a kind of elevator used for lifting bulk materials vertically, maximum transport height is 50 m. It is widely used in the cement industry, chemical industry, power plant, grain storage and other industry etc, For conveying cement, cement clinker, crushed lime, sand, compound fertilizer, coal, grain and other bulk material etc. Our company manufacture various type bucket elevator to meet your different demands.All buckets are tracked by Steel Plate chain not belt, so it can resist high temperature more than 250. And the steel plate chain has a longer service life than belt.Operating PrincipleFlow-through feeding: Materials directly flows into the hopper which does not need to excavate materials, reducing mechanical wear.Materials are completely and uniformly taken, which avoid material storage at the bottom. It is suitable for conveying materials with large size and relatively high abrasiveness.Performance Features1. High Hoisting CapacityThe flow-through feeding and induction discharging are adopted, and the intensively arranged hopper is adopted for the conveying. The chain speed is low and the hoisting amount is large. The hoisting amount is within the range of 15-800 m3/h.2. Low Drive PowerWhen the material is hoisted, there is no back feed and packing, so the useless power is low. The theoretical calculated power is about 45% of that of the ring elevator.3. Wide Range of HoistingThis type of elevator poses fewer requirements for the type, characteristics and lumpiness of the material. It can hoist not only powdery, granular and block materials but also the materials with high abrasiveness and with a temperature of 250.4. Higher Lifting HeightWith low chain speed, smooth and steady operation, and high-strength wear-resisting plate chain, the hoisting height (up to 50m) is relatively large.5. Long Service LifeThe flow-through feeding is adopted for the elevator, and there is little squeezing and collision between moving parts and material. The elevator is designed to ensure that the material will not be scattered during feeding, hoisting and discharging, which prevents the elevator body from being worn by the material. The conveying chain is a high-strength wear-resisting plate chain that can extend the service life of the chain and chain bucket. According to the long-term production practice of the product. The service life of the conveying chain is over 5 years.6. Convenient MaintenanceThe advanced design principle ensures the operational reliability of the entire conveyor. The failure-free time is over 20,000 hours.Structural Composition1NE plate chain bucket elevator consists of running part, drive unit, head device, middle casing, and tail device.2Running part consists of a hopper and a bush roller chain. The single-strand chain is used for NE15 and NE30, and the double-strand chain is used for NE50-NE500.3Drive unit consists of a drive platform, a drive combination and a transmission chain. There are 2 types of drive combinations:1). Chain drive: it is generally composed of a hardened reducer (or JZQ speed reducer), a YOX hydraulic coupling, a Y-series motor, an XWD speed reducer, an electromagnetic clutch (or manual clutch);2). Direct connection: the direct connection is used between the rectangular-axis hardened reducer and the main shaft of the elevator, and the coupling connection is used between the Y-series motor and the speed reducer.4Drive device is divided into left assembly drive device, right assembly drive device, and dual drive device. So as to be respectively corresponding to left assembly elevator, right assembly elevator, and dual drive elevator.Left assembly: personnel are face to the feed inlet, while drive device combination is on the left side.Right assembly: personnel are face to feed inlet, while drive device combination is on the right side.Dual drive: personnel are face to the feed inlet, while drive device combination is on both sides.5Middle casing -middle nodules, standard and non-standard, of the access door, are included.6The tail device is equipped with a tension gear, the NE15-50 is spring-tensioned, and the NE100-500 is drop-weight-tensioned. At present, our company provides a new internal tension device, which will greatly reduce ash leakage.

NE Bucket elevator is a kind of elevator used for lifting bulk materials vertically, maximum transport height is 50 m. It is widely used in the cement industry, chemical industry, power plant, grain storage and other industry etc, For conveying cement, cement clinker, crushed lime, sand, compound fertilizer, coal, grain and other bulk material etc. Our company manufacture various type bucket elevator to meet your different demands.

The flow-through feeding and induction discharging are adopted, and the intensively arranged hopper is adopted for the conveying. The chain speed is low and the hoisting amount is large. The hoisting amount is within the range of 15-800 m3/h.

This type of elevator poses fewer requirements for the type, characteristics and lumpiness of the material. It can hoist not only powdery, granular and block materials but also the materials with high abrasiveness and with a temperature of 250.

The flow-through feeding is adopted for the elevator, and there is little squeezing and collision between moving parts and material. The elevator is designed to ensure that the material will not be scattered during feeding, hoisting and discharging, which prevents the elevator body from being worn by the material. The conveying chain is a high-strength wear-resisting plate chain that can extend the service life of the chain and chain bucket. According to the long-term production practice of the product. The service life of the conveying chain is over 5 years.

2). Direct connection: the direct connection is used between the rectangular-axis hardened reducer and the main shaft of the elevator, and the coupling connection is used between the Y-series motor and the speed reducer.

Drive device is divided into left assembly drive device, right assembly drive device, and dual drive device. So as to be respectively corresponding to left assembly elevator, right assembly elevator, and dual drive elevator.

Thanks for your time and interest in Yingda Heavy Industry .We are focus on what we really can do for our customers . So , if you have more detailed information , please feel free to let us know . We will reply you within 24 hours .

bucket elevator, bucket elevators, bucket elevator manufacturer henan excellent machinery co.,ltd

bucket elevator, bucket elevators, bucket elevator manufacturer henan excellent machinery co.,ltd

Equipment model: TDG1000-42.50 Handling material: cement clinker Handling capacity: 650t/h Bucket width: 1000mm C-C distance: 42.50m Bucket speed: 1.86m/s End user name: Xuzhou (CUCC) Cement Co.,Ltd

Equipment model: TDG500-26.50 Handling material: Fertilizer Handling capacity: 150t/h Bucket width: 500mm C-C distance: 26.50m Bucket speed: 1.68m/s End user name: Yunnan Yuntianhua Co., Ltd

bucket elevator horsepower calculation| engineering guide

bucket elevator horsepower calculation| engineering guide

There are many variables to consider when designing a Bucket Elevator. These include bucket size, bucket spacing, speed, and various components. This information can act as a guide for determining the Horse Power (HP) requirements of a Bucket Elevator.

When designing a Bucket Elevator there are more variables to be consider that can be listed here. It should be noted that a small mistake in calculating the required HP of a small, low capacity Bucket Elevator may not result in a unit failure, but a small mistake on a large, high capacity bucket elevator may result in a catastrophic failure.

To be able to accurately determine the power requirements of a Bucket Elevator, it must first be understood the internal forces acting on the unit. Although there are many components in the Bucket Elevator, only the upward movement of the conveyed product needs to be considered.

This is because the weight of the Belt/Chain and Cups are identically balanced on both sides of the head shaft. Only the internal friction caused by the movement of these components needs to be considered when calculating the HP requirements.

There are many variations of Horse Power (HP) calculations found in historical and individual manufacturers literature. The formulas below are used to determine the power requirements of a Bucket Elevator throughout the industry.

System friction can be accounted for with a length equivalency factor. This factor is dependent on the pulley diameter and is shown below. The Length Equivalency Factor ranges from 5 to 15, depending on the application. Consult your Bucket Elevator Supplier for additional information.

Another way to account for the system friction is to add a multiplication factor to the calculated HP in Equation 3. This multiplication factor typically ranges from 10% to 30%, depending on the application. Consult your Bucket Elevator Supplier for additional information.

ne series bucket elevator plate chain-zhejiang province jiande conveying machinery equipment co., ltd

ne series bucket elevator plate chain-zhejiang province jiande conveying machinery equipment co., ltd

1. TB-NE series board chain hoist (hereinafter referred to as NE series board chain hoist) is the introduction of foreign advanced technology similar products developed products. It is currently a more advanced and mature vertical lifting equipment, has been widely used to enhance a variety of bulk materials, such as: ore, coal, fly ash, cement, cement clinker, grain, fertilizer and the like. In the industrialized countries, such hoist a very wide application. Due to its high efficiency, it has become an alternative choice for HL and TH type and so ring chain hoist.

2.1 to enhance a wide range: such hoist on the kind of material, less required characteristics and block degree. Not only can improve powdery, granular and bulk materials, but also to enhance the abrasive big material and temperature of the material 250 .

2.3 Long life: feeding hoist to take inflow, squeeze and collision phenomenon rarely occurs between moving parts and materials, the machine is designed to ensure that the material in the feed, lifting and unloading will not scattered, which to prevent wear and tear on the body of material, the use of plate chain conveyor chain of high strength wear-resistant, extend the service life of the chain and chain bucket. According to the foreign like product in the production of long-term practice shows that conveyor life of more than five years.

2.4 drive power is small: this type of hoist to take into the feeder, gravity induction discharge, and the use of large-capacity hopper-intensive layout conveying chain speed is low, and enhance the capacity. When the material hoist, almost no feed back and excavating, therefore, less power is invalid, theoretical shaft power is about 45 percent chain hoist.

5.2 drives - taking Y series motor, through reducer (or geared motor directly cycloid) and chain drive components. (Can also be directly connected to the transmission gear according to user requirements to switch hollow shaft).

bucket elevator dove equipment and machinery dove equipment and machinery

bucket elevator dove equipment and machinery dove equipment and machinery

DOVE Bucket Elevator or Elevator Bucket is the most efficient equipment for vertical lifting and conveying of powders, granular and bulk material. It is supplied in various standard capacities of (5-100 Tons/ Hour), and standard height of up to 30 meters. For special application larger capacities and higher elevation can be supplied.

DOVE Bucket Elevator is a type of vertical Bucket Conveyer, which is designed to move bulk material vertical to a certain height, where employ centrifugal force to throw Powder, Granular or bulk material out of buckets, as they travel over the head pulley or sprocket, on a vertical angel. The buckets are loaded with bulk material at front, or boot, at ground level via feed hopper and are lifted vertically by a chain or belt mechanism to the top, where each bucket automatically deposits at the top, also known as the discharge.

DOVE Continuous Bucket elevators are designed and supplied for wide range of applications, including Mining and minerals processing plants, material handling in Agriculture, chemicals, building material, Cement mortar, food production, Medicine, etc.

DOVE Continuous Elevator Buckets are designed for vertical lifting and transport of various material. Multiple buckets are connected on a circulating chain or belt, material are loaded on continuous basis inflow to the feed hopper of the elevator, which is located on the foot of the elevator, on the ground level. The material will be loaded to the buckets through the feed hopper of the elevator, once bucket is filled, it will move up to the top of the elevator and discharge the material from the top into small hopper to feed the next stage of the material handling process.

The buckets work continuously in circulation, in a closed shell to realize continuous material movement. The buckets scope the material from the feed hopper, feed storage bin and lift to the top, flip down after bypass the top wheel, and discharge material into the receiving hopper. In the chain drive mechanism, there are two parallel transmission chain, connected at the top and down, there are a pair of drive sprockets, as well as a pair of Ideler sprockets. The buckets and the drive mechanism is housed in a shell to prevent the dust to the environment.

DOVE laboratory will assay your ore samples rapidly and analyze your raw materials and recommend the most efficient processing plant according to the ore specifications, minerals composition, and ore assay results, and your project size and the geologic and topographic conditions of your mine.

Related Equipments