ceramic ball mill for sale

used ceramic ball mill for sale. white lai equipment & more | machinio

used ceramic ball mill for sale. white lai equipment & more | machinio

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

Ceramic ball mill is used for fine grinding of feldspar,quartz,clay,ore and so on .The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving can be dry or wet.The mach...

Ceramic ball mill is used for fine grinding of feldspar,quartz,clay,ore and so on .The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving can be dry or wet.The mach...

Baichy ball mill machine introduce Ball Mill is a type of grinder used to grind materials into an extremely fine powder mainly for use in the mineral processing industry. Ball Mills can grind various ores and oth...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

Mining Classifying Coal Ball Mill Cement Limestone gold ore Grinding ball mill machine with best price Ball Mill is a type of grinder used to grind materials into an extremely fine powder mainly for use in the mi...

Copper Ore Ball Grinding Mill Price Ball Mill is a type of grinder used to grind materials into an extremely fine powder mainly for use in the mineral processing industry. Ball Mills can grind various ores and ot...

ceramic ball mill for sale | buy ceramic ball mill machine with good performance

ceramic ball mill for sale | buy ceramic ball mill machine with good performance

The ceramic ball mill uses a ceramic material liner, and ceramic alumina balls are used as grinding media. It is the key ball grinding mill equipment for fine grinding after the ceramic glaze is coarsegrinding. The ceramic ball mill machine is widely used for the dry or wet grinding of the ceramic glaze mineral raw materials, such as feldspar, quartz, talc, kaolin, etc.

Due to its small capacity, the ceramic ball mill generally has a loading capacity of 0.05-15 tons/time. It belongs to asmall ball mill, so it is generally used in small batch production during product trial production.

In recent years, the ceramic ball mill machine has not only improved its production capacity and crushing efficiency, but also expanded its application range. From limestone to basalt, from stone production to various ore crushing, the ceramic ball mill can provide high milling performance in various medium crushing, fine crushing, and ultra-fine crushing operations.

As one of the high-quality ceramic ball mill suppliers, in order to match the needs of customers with larger production, we have launched a ceramic ball mill machine with a single charge of 40 tons. The size of the ceramic ball mill barrel is 36007000mm, the barrel rotation speed is 13r/min, and the installed power is 160KW, which has been praised by many customers with large production needs.

The ceramic ball mill media is the same as that of the liner, which is made of alumina ceramics. According to the different grinding materials, the grinding medium can also be made of quartz or silex. As the ceramic ball mill media, ceramic alumina balls have the advantages of low wear, high hardness, high density, and low cost, which can maximize the purity of the crushed materials and obtain high grinding efficiency.

The ceramic alumina balls in the ceramic ball mill machine is generally added to three to four different specifications, which is related to the feed and discharge particle size and the speed of theball milling machine. When only dispersing the material, only one type of ceramic alumina ball can be added. The proportion of grinding ball is related to the grinding method of the ceramic ball mill. The ratio of large balls, medium balls, and small balls in dry and wet ceramic ball mill is also different.

In the grinding process of dry ceramic ball mill machine, the function of large and small ceramic alumina ball is different. Relatively speaking, the large ceramic alumina ball is beneficial to the impact effect, while the small ball is beneficial to the grinding effect. When the ratio of the grinding ball is reasonable, the higher bulk density can be obtained. Therefore, the reasonable ratio of large and small balls is an important factor affecting the efficiency of dry ceramic ball mill machine.

For the wet ceramic ball mill, because of the participation of liquid, the material is crushed by grinding rather than impact. Therefore, the amount of large ceramic alumina balls should be appropriately reduced, and small and medium balls should be added to ensure a good grinding effect. The initial grinding ball ratio of wet ceramic ball mill machine is generally 30% for large ceramic alumina balls, 40% for medium balls and 30% for small balls.

As a ball mills supplier with 22 years of experience in the grinding industry, we can provide customers with types of ball mill, vertical mill, rod mill and AG/SAG mill for grinding in a variety of industries and materials.

used ball mills | ball mills for sale | phoenix equipment

used ball mills | ball mills for sale | phoenix equipment

Why buy a brand new ball mill when we have high-quality used and refurbished ball mills for sale? Well-made industrial equipment from top manufacturers maintain their value and save your company or industry substantially.

Ball mills are a fundamental part of the manufacturing industry in the USA as well as around the world. Ball mills crush material into various sizes and extract resources from mined materials. Pebble mills are a type of ball mill and are also used to reduce the size of hard materials, down to 1 micron or less.

Because of their fairly simple design, ball mills and pebble mills are less likely to need costly repairs (unlike other crushing or extraction equipment) making them an attractive option for businesses on a budget.

Unused 24 x 41 Polysius EGL Ball Mill. Steel Lined. Twin 7MW Electric Motor Drives, 14MW/11kV Power Supply Unit. Twin Combiflex Fixed Speed Gear Drive. Auxiliary Drive Motors, Lubrication Unit Fixed Bearing and Lubrication Unit Floating Bearing, Frozen Charge Protection System, Vibration Sensors for COMBIFLEX, Dam Ring, Permanent installed Centrifuge for Fixed Bearing, Closed Circuit Chiller Unit, Insurance and Commissioning Spares, Special Tools. Qty 2 Available.

Used 11.5' diameter X 17' long ball mill. Manufactured by KVS (Kennedy Van Saun). 1000 HP open winding synchronous motor. Features trommel discharge and feed tank. Refurbished in 2013, which included installation of new oil jacking system, oil lube system for Babbitt bearings, new titanium steel water jet-machined discharge grates, and motor refurbishment. Set of new babbit bearings available. Previously operated as a closed circuit dry mill with grinding capacity of 40 metric tons per hour with output fineness of >80% passing 200 mesh. Motor operating speed of 15.8 RPM charged with approximately 78 tons of 1", 2" and 3" steel balls. Last used at a phosphate processing facility and in good condition.

Used 8' x 10' Epworth 200 HP jacketed steel ball mill, approximately 8' diameter x 10' long, jacketed chamber, gear and pinion driven with approximately 200 motor drive, on stands, Serial# K-0845.

Used 175HP Hosokawa Alpine Super Orion Continuous Ball mill. Model 195/495 CLKE. Alumina Oxide lined. 195 cm (76")inner diameter x 495 cm (194") long drum, periphery dry discharge with adjustable discharge openings, enclosed discharge housing, direct driven thru gearbox. 175HP 460 volt motor with VFD motor controller. Serial# C1198474. Built 2012.

Used 6' x 8' Paul Abbe jacketed 100 HP steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.

Unused 5' diameter X 6' long Steel Lined Ball Mill, manufactured by Patterson Industries, Type D, non-jacketed, with AR400 steel liners. Includes 30 HP, 3 phase, 60 Hz, 230-460 V, 1725 RPM motor. Mill drive is integrally coupled to horizontal parallel shafted helical gear reducer. Continuous type, with product feeding through spiral inlet trunnion and exiting through the discharge end trunnion. Features cylinder manway access door for cleaning. Internal volume measures approximately 839 USG (112 CF). Mill shell is lined with (24) 1/4" thick liner plates, each head lined with (8) 3/8" thick pie-shaped liner plates. Mounted on stand with approximately 66" clearance between the mill cylinder and floor. Mills were intended for use in glass particle size reduction but were never installed. Manufactured in 2019, units are still in factory plastic wrap and in new condition. (Qty - 2 available)

Used 5 ft. dia. x 6 ft. (Approx 120 Cu.Ft) Patterson Pebble Mill. Alumina brick lining. On stand with 20 HP motor and gear reduced drive with brake. Bull gear and pinion. Babbit bearings. Door is polyurethane and has a drain with plug.

Used 4' x 5' (345 Gallon Total/210 Gallon Working) Ball Mill. Mfg Steveco. Steel Lining. Jacketed. 20 HP (460V/60Hz/3ph) Gear Reduced heavy duty drive on high stands. Solid door and discharge door.

Used Paul O. Abbe One Piece Ceramic Ball Mill, Model JM-300. Non-Jacketed chamber approximate 24.8" diameter x 39.5" long. Vessel volume 300 liter (79 gallons). Approximate 5" charge and discharge port with cover. Driven by a 3 HP, 3/60/208-230/460 volt 1760 rpm motor with a shaft mounted Sumitomo Model 203E-25 reducer. Approximate 32 rpm drum speed. Includes a control panel with an ABB drive. Mounted on a common carbon steel frame legs. Serial # 0830032JM. Built 2008.

Used 28 Gallon Paul O. Abbe Ceramic Jar / Ball Mill. Approximate 3.7 Cubic Feet. Approximate 20" diameter x 20" straight side. Includes motor and cage. Mounted on a carbon steel frame with safety cage.

Used 30 gallon Paul O. Abbe Jar Mill. Porcelain jar 21" diameter x 18" straight side. Driven by 1hp, 1/60/115/230 volt, 1740 rpm motor thru a reducer, ratio 9.3 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#84876

Used 25 Gallon Norton Chemical Process Products Jar Mill. Porcelain jar 20" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1730 rpm motor thru a reducer, no ratio. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial# AV-83104.

Used 35.30 Gallon Paul O. Abbe Jar Mill. Model 5A Porcelain jar 22" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1745 rpm motor thru a reducer, ratio 25 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#A41563.

Unused 24 x 41 Polysius EGL Ball Mill. Steel Lined. Twin 7MW Electric Motor Drives, 14MW/11kV Power Supply Unit. Twin Combiflex Fixed Speed Gear Drive. Auxiliary Drive Motors, Lubrication Unit Fixed Bearing and Lubrication Unit Floating Bearing, Frozen Charge Protection System, Vibration Sensors for COMBIFLEX, Dam Ring, Permanent installed Centrifuge for Fixed Bearing, Closed Circuit Chiller Unit, Insurance and Commissioning Spares, Special Tools. Qty 2 Available.

Used 11.5' diameter X 17' long ball mill. Manufactured by KVS (Kennedy Van Saun). 1000 HP open winding synchronous motor. Features trommel discharge and feed tank. Refurbished in 2013, which included installation of new oil jacking system, oil lube system for Babbitt bearings, new titanium steel water jet-machined discharge grates, and motor refurbishment. Set of new babbit bearings available. Previously operated as a closed circuit dry mill with grinding capacity of 40 metric tons per hour with output fineness of >80% passing 200 mesh. Motor operating speed of 15.8 RPM charged with approximately 78 tons of 1", 2" and 3" steel balls. Last used at a phosphate processing facility and in good condition.

Used 8' x 10' Epworth 200 HP jacketed steel ball mill, approximately 8' diameter x 10' long, jacketed chamber, gear and pinion driven with approximately 200 motor drive, on stands, Serial# K-0845.

Used 175HP Hosokawa Alpine Super Orion Continuous Ball mill. Model 195/495 CLKE. Alumina Oxide lined. 195 cm (76")inner diameter x 495 cm (194") long drum, periphery dry discharge with adjustable discharge openings, enclosed discharge housing, direct driven thru gearbox. 175HP 460 volt motor with VFD motor controller. Serial# C1198474. Built 2012.

Used 6' x 8' Paul Abbe jacketed 100 HP steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.

Unused 5' diameter X 6' long Steel Lined Ball Mill, manufactured by Patterson Industries, Type D, non-jacketed, with AR400 steel liners. Includes 30 HP, 3 phase, 60 Hz, 230-460 V, 1725 RPM motor. Mill drive is integrally coupled to horizontal parallel shafted helical gear reducer. Continuous type, with product feeding through spiral inlet trunnion and exiting through the discharge end trunnion. Features cylinder manway access door for cleaning. Internal volume measures approximately 839 USG (112 CF). Mill shell is lined with (24) 1/4" thick liner plates, each head lined with (8) 3/8" thick pie-shaped liner plates. Mounted on stand with approximately 66" clearance between the mill cylinder and floor. Mills were intended for use in glass particle size reduction but were never installed. Manufactured in 2019, units are still in factory plastic wrap and in new condition. (Qty - 2 available)

Used 5 ft. dia. x 6 ft. (Approx 120 Cu.Ft) Patterson Pebble Mill. Alumina brick lining. On stand with 20 HP motor and gear reduced drive with brake. Bull gear and pinion. Babbit bearings. Door is polyurethane and has a drain with plug.

Used 4' x 5' (345 Gallon Total/210 Gallon Working) Ball Mill. Mfg Steveco. Steel Lining. Jacketed. 20 HP (460V/60Hz/3ph) Gear Reduced heavy duty drive on high stands. Solid door and discharge door.

Used Paul O. Abbe One Piece Ceramic Ball Mill, Model JM-300. Non-Jacketed chamber approximate 24.8" diameter x 39.5" long. Vessel volume 300 liter (79 gallons). Approximate 5" charge and discharge port with cover. Driven by a 3 HP, 3/60/208-230/460 volt 1760 rpm motor with a shaft mounted Sumitomo Model 203E-25 reducer. Approximate 32 rpm drum speed. Includes a control panel with an ABB drive. Mounted on a common carbon steel frame legs. Serial # 0830032JM. Built 2008.

Used 28 Gallon Paul O. Abbe Ceramic Jar / Ball Mill. Approximate 3.7 Cubic Feet. Approximate 20" diameter x 20" straight side. Includes motor and cage. Mounted on a carbon steel frame with safety cage.

Used 30 gallon Paul O. Abbe Jar Mill. Porcelain jar 21" diameter x 18" straight side. Driven by 1hp, 1/60/115/230 volt, 1740 rpm motor thru a reducer, ratio 9.3 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#84876

Used 25 Gallon Norton Chemical Process Products Jar Mill. Porcelain jar 20" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1730 rpm motor thru a reducer, no ratio. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial# AV-83104.

Used 35.30 Gallon Paul O. Abbe Jar Mill. Model 5A Porcelain jar 22" diameter x 20" straight side. Driven by 1hp, 3/60/230/460 volt, 1745 rpm motor thru a reducer, ratio 25 to 1. Inlet & outlet with cover and clamp. Mounted on carbon steel legs with a discharge housing. Serial#A41563.

Phoenix Equipment is a global supplier of used ball mills. We have new, used and reconditioned ball mills from leading manufacturers, including: Paul O. Abbe Retsch Epworth Patterson Netzsch Newell Dunford Marcy Denver FL Smidth Nordberg Allis Chalmers Metso Hardinge Kurimoto Iron Works Kobe-Allis Chalmers Stevenson Fuller-Traylor Steveco Western Machinery Marion Machine Makrum and more. Ball mills are used in a wide-range of industrial applications: cement processing, paint dyes and pigmentation processing, coal and ore processing, chemical processing and pyrotechnics, and many others. Ball milling has several key advantages over other systems: cost of the grinding medium and installation is generally low works for batch or continuous operation (as well as closed-circuit grinding) suitable for a wide range of materials simple design ensures less repairs Whether you are in the market for a used ball mill for your business or you have a pre-owned ball mill youd like to sell, USA-based Phoenix Equipment can help. Contact us today to learn more about what Phoenix can do for you. Related equipment: Agitators, Screen/Separators, Kilns and Calciners, Scales and Extruders. Fill out our quick and easy quote form for more information about our Ball Mills inventory.

Ball mills are used in a wide-range of industrial applications: cement processing, paint dyes and pigmentation processing, coal and ore processing, chemical processing and pyrotechnics, and many others.

Whether you are in the market for a used ball mill for your business or you have a pre-owned ball mill youd like to sell, USA-based Phoenix Equipment can help. Contact us today to learn more about what Phoenix can do for you.

Phoenix Equipment buys and sells used chemical process equipment and plants for relocation. Our industry focus includes process plants and machinery in the chemical, petrochemical, fertilizer, refining, gas processing, power generation, pharmaceutical and food manufacturing industries. We have extensive experience acquiring processing plants and process lines that require the execution of complex dismantlement, demolition and decommissioning projects. Based in Red Bank, New Jersey, USA, we have team members located in China, India, Germany and relationships throughout the world.

Why Use Phoenix for Your Plant Dismantling & Plant Relocation Needs A Common Plant Liquidation Scenario Your company has made the tough decision to close a plant. This plant was running for years, and the company paid a lot to have it built, paid everyones salaries, and maintained or even modernized all of the production assets over the plants life but the plant needs to be sold off for one reason or another. Your company has called upon you to recover as much dollar as you can to help keep the organization alive, and better yet, healthy, in what is a constant battle in the marketplace. Youve either: Have spent months, maybe even years trying to find a buyer that would operate the plant in place, without any success, while the plants assets lose value every passing day. Or, you cant sell it to another company, as you are one of the few suppliers of the product the plant makes, and you dont want to create a competitor, or improve a competitors position. Or, the plant is on leased propert

Hydrogenation: Major Applications Hydrogenation is a billion-dollar industry. Hydrogenating means to add hydrogen to something. According to Haldor Topsoe, hydrogenation comprises 48% of total hydrogen consumption, 44% of which is for hydrocracking and hydrotreating in refineries , and 4% for hydrogenation of unsaturated hydrocarbons (including hardening of edible oil) and of aromatics, hydrogenation of aldehydes and ketones (for instance oxo-products), and hydrogenation of nitrobezene (for manufacture of aniline). Hydrocracking & Hydrotreating Industrially, hydrotreating and hydrocracking are performed in down flow trickle bed reactors, where the gas and the liquid feed are sent concurrently through a fixed bed plug flow reactor. Although the flow pattern in the reactor can be reasonably approximated, the observed kinetics in such a trickle bed reactor are quite often affected by minor unplanned oscillations in the flow. How the gas and liquid collide and mix together affects the end prod

Thermoplastics A Focus on Polyethylene & Polypropylene Thermoplastics are a class of polymers, that with the application of heat, can be softened and melted, and can be processed either in the heat-softened state (e.g. by thermoforming) or in the liquid state (e.g. by extrusion and injection molding). Over 70% of the plastics used in the world are thermoplastics, and the two most commonly used thermoplastics are both olefins, compound made up of hydrogen and carbon that contains one or more pairs of carbon atoms linked by a double bond. These two olefins are polyethylene and polypropylene. Polyethylene Polyethylene is a tough, light, flexible synthetic resin made by polymerizing ethylene, chiefly used for plastic bags, food containers, and other packaging. It may be of low density or high density depending upon the process used in its manufacturing. It is resistant to moisture and most of the chemicals. It can be heat sealed and is flexible at room temperature (and low temperature), and in additional to its material properties,

Related Equipments