Wet type ball mill are mostly used in the industry production. It is to increase the high grinding efficiency under the ball mill grinding and striking, from which the granularity is even and no flying dust with little noise, being the most universal powder machine in the benefication as powder grinding the ferrous metal like gold, silver, plumbum, zinc,copper,molybdenum,manganese,tungsten etc, as the nonmetal powder grinding like graphite,feldspar, potash feldspar, phosphorus ore, fluorite, clay, and swell soil etc. The wet type ball mill need to add the liquid into the grinding ball media auxiliary (water or ethanol). The material output gate is trumpet shape, with screw device inside, easy to discharging the material.
Copyright Zhengzhou Bobang Heavy Industry Machinery Co.,Ltd. E-mail : [email protected] Tel0086- 86656957 Address No.11 West Construction Road, Zhongyuan District,Zhengzhou City,Henan Province, China
Orujillo cakes in fuel handling plants in power stations.Study explored impact of environment and material composition on orujillo caking.Caking induced by heat and was most prevalent in pulp section of orujillo.Caking was brought on by a glass transition step due to high moisture content.Key to overcoming orujillo caking is through moisture content control.
The use of olive mill wastes (orujillo) within coal fired power stations in the UK has led to unexpected difficulties with material caking within the fuel handling plant. This study replicated orujillo caking on a laboratory scale using a planetary ball mill and explored the impact of mill parameters (speed, volume, and duration) on the caking phenomenon. The impact of orujillo composition was examined for 4 sections of fresh and dried orujillo (whole, pulp 0850m, pulp 8503350m, and cluster 3350m+) for set milling conditions. Caking was induced by heat generation within the mill and was most prevalent in the pulp section of orujillo. Caking was brought on by a glass transition step, which was measured to be around 9798C for a moisture content of 67% in a differential scanning calorimeter (DSC). Caking was the result of the bulk moisture content (1418%) being higher than the standard moisture content of orujillo (<12%), and can be mitigated through drying. Thus the key to overcoming orujillo caking in fuel handling plants is through moisture content control. Additionally, as the caking issue is most prevalent in the pulp section, all fines below the required combustion particle size (typically <1mm) should be removed prior to comminution and sent directly to the burner. This would also reduce the comminution load by nearly 50%, increase the energy potential of the fuel, and remove the most problematic section of orujillo from the fuel handling plant.