A cattle crush or squeeze chute is a strongly built stall for holding cattle safely. It is used to enable easy access for examination of different size animals. Crushes are used to minimise the risk of injury.
There are different types of cattle crushes with different features. Typical features of the cattle crush include: push pull lever, dual locking system, side gates (with slam gate latches), needle gates, inspection gates, bottom gate, and walk through vet compartment.
Built for the landowner whos working with smaller tracks of property and believes that no matter the size of the property, anything is possible. Small in stature and easy to handlebut big in featuresmakes this deer feeder one of those products you cannot judge by its cover. The Low bay design makes for easy loading with the large flip-top lid; add in the spout and varmint proof panel and leg design that help eliminate varmints like Raccoons, Opossum and Skunks, and you'll save both time and money.
VIBCO Vibrators promote flow from bins and hoppers for all types of material - large aggregate to find sand, powders, flakes, pills, bottle caps,asphalt, flour, salts, cement... you name it, VIBCO helps it flow.
How do they work? Check out the video below to see some of the ways that VIBCO Vibrators solve problems. Simply put, VIBCO Vibrators break the friction that holds material in place and creates all sorts of challenges like ratholes, bridges, clogs, jams, and sticking.
This Round Bale Hay feeder is 4 tall by 6 x 6 wide. Height from the ground to the roof top is 7 8 tall. The #BB1000 weighs @ 200lbs, and the roof frame @ 120 lbs. Built with galvanized steel, 16 gauge- 1 5/8 round tube on the outer frame. 1 3/8 round tube curved bars. And 1 round tube vertical bar ends. All Big Bale Feeders are now Powder Coated for durable use, Choose any color from our color chart. The spacing between the feeder bars is 6 7/8. Feeder Bars are set on 8 1/4 centers. 15 from the ground to the bottom of the hay section. Customer supplies roofing material for roof frame. Wood, Metal, or a tarp can be used. Door has a spring loaded latch to prevent livestock from opening. Bale weight limit 2500lbs.
Ideal for large/tall sized livestock, available with or without trough, bar hay area.40 from the ground to bottom area of round bale.Item # BB6000 6ft Tall Big Bale Round Bale Hay Feeder bar hay area = $ 668.00Item # BB6000T- 6ft Tall Big Bale Round Bale Hay Feeder- bar hay area with Trough= $ 912.00
These racks are ideal for feeding large bales of hay. Keeps hay off of the ground. They will fold up flat when not in use for easy storage during the summer. Holds up to 1800 lb bales, round or square bales. Included safety roll bars on ends prevent hay from tipping or rackfolding shut when no hay is on rack. Made of 1 3/8 X 14 gauge tubing. Powder Coated Wheel Grey unless another color is requested. Hay Riser #HRISER $ 343.00
BIG SQUARE BALE HAY RACKItem # SB2000.AOutside dimensions: 72 wide, 100 long, 48 tall. Outside Pipe 1 5/8 -16 gauge. Inside pipe 1 3/8 -16gauge. Item weight-270lbs. Bottom point of hay is 8 off the ground. Hay area bars set in 8 1/4 centers. 6 7/8 opening between bars. Made to fit 4 x 8 large square bales of hay. Assembly Required upon arrival.This hay rack is much cheaper to ship, if it is shipped disassembled.Price: $ 814.00This hay rack can be built as one solid piece ifrequested and picking up directly at the factory.
Wall Mount Hay Rack with bars pictured, ideal to use with larger sized livestock like horses, cattle, etc. Bars set on 5 inch centers, with a 4 inch opening between the bars. Brackets at each corner for mounting to wall. 30 inches tall, 5 inch wide at the bottom, 24 inches wide at the top. In 4ft and 8ft lengths.
Fence Mount Hay Rack like the Wall Mounts pictured above is available with hooks instead of wall mount brackets, to hang on a board or pipe fence (specify size of hooks needed) . Solid metal back added to the open back area and sides to prevent hay from falling out of the back side of the hay rack.
This feeder is ideal to use in stalls, kidding pens, or at shows. Hooks in back for easy attachment to fence or gate. Hooks can be removed and feeder mounted to the wall. Has section for hay and grain. Ideal for all smaller sized livestock such as alpacas, llamas, goats, sheep, etc. Feeders made with galvanized metal and POWDER COATED in your color choice.
This is the new mini hay and grain feeder. It is half the width of our current Hanging Stall Feeder pictured above and works much better for miniature horses and donkeys. There is more distance between the hay and the pan so livestock with heads larger than sheep or goats can get their head in and out better to eat grain.Item #: GFMINI Price: 88.00
Hay Feeders that will hang on a pipe gate or board. Sized for the Average Sized horse. Remove hanging brackets to mount feeder to the wall. These feeders are made of galvanized steel and powder coated in your color choice from our color chart.
Are you looking for a feeder or hay rack that is not pictured on our site? Do you have ananimal with special needs that you just cant find the right type of feeder for? Contact us to get a quote for Custom Built feeders or hay racks. We will build to suit your needs!
Hay Rack with trough and hinged top lid, 40 wide x 22 tall x 15 front to back. Hay area is 15 at top and 4 at bottom. Single rod in middle of hay area. Top rack can be built to hinge from front or back. 40lbs.Item # GF40 = $ 261.00
Hay Rack with trough and hinged top lid: 42 wide x 24 tall x 18 front to back. Hay area is 18 at top and 12 at bottom. Double bars in middle of hay area. Top rack can be built to hinge from front or back. 55lbsItem# GF42- $ 278.00
Hay Rack with trough and hinged top lid 44 wide x 33 tall x 20 front to back. Hay area is 20 at top and 12 at bottom. Double bars in hay area. Top rack can be built to hinge from front or back. 70lbsItem # GF44- $ 299.00
Just drop a square bale in these feeders and cut the strings. Easy to disassemble and move. Breaks down into 3 pieces for easy moving. Made with galvanized metal and Powder Coated. Let us know your color preference.
34 wide at skids29 wide at trough26 wide at top of hay rack18 from ground to top of trough44 from ground to top of hay rack6 deep troughBottom of hay rack sits at top of troughBars on 4 centers (3.25 between bars)4 hay rack= 48 long feeder ; (54 long skids)6 hay Rack= 72 long feeder (78 long skids)8 hay rack= 96 long feeder ; (102 long skids)
Add to your 4ft and 8ft Free Standing OR 4ft, 6ft, or 8ft Heavy Duty with Trough Hay Racks listed above and below. Easy access to open for filling with hay. Will open from both sides for adding flakes of hay or canopy will lift off to add entire bale. Clamp attachment with slide in holder for canopy top. Canopy can be attached to frame with rope or zip ties. The cover is waterproof, UV resistant, and will not crack or become brittle in cold weather.
#HF (4, 6, 8) HAY RACK DIMENSIONS36 wide at skids 29 wide at trough26 wide at top of hay rack36 from ground to top of trough72 from ground to top of hay rack6 deep troughBottom of hay rack sits 6 above troughBars on 5 center (4.25 between bars)4 Hay Rack= 48 long feeder (54 long skids)6 hay Rack= 72 long feeder (78 long skids)8 Hay Rack= 96 long feeder (102 long skids)