chute feeder valve

gravity separation equipment, gravity separation method, gravity separator manufacturers - xinhai

gravity separation equipment, gravity separation method, gravity separator manufacturers - xinhai

Xinhai gravity separation equipment includes shaking table (concentrating table), jig and spiral chute, with simple operation, high efficiency and gravity separation method. Xinhai is a gravity separator manufacturers with more than 20-years of experience.

High-quality equipment manufacturing capabilities, focusing on the research and development and innovation of mineral processing equipment, extending the stable operation time of the equipment, and providing cost-effective services.

mining processing equipment, mining equipment, gold mining equipment, mineral processing equipment manufacturers - xinhai

mining processing equipment, mining equipment, gold mining equipment, mineral processing equipment manufacturers - xinhai

The new grooved annular liner increases the ball ore contact surface, strengthens the grinding effect, and has the ability to lift the ore, reducing energy consumption; the large double-row spherical roller bearing design can greatly reduce the friction and effectively Energy saving 20-30%, and easy to start; the small ball mill with a diameter of 2.1 .

An air inflation mechanical agitation floatation cell with slurry suction, which is featured with strong agitation force, good air spreading effect, uniform mixing of slurry and air, less sedimentary of tailings, low turnaround speed and low power consumption. It can be combined with KYF flotation cell as a joint unit, working as suction cell.

This thickener is a new type thickening equipment independently developed by Xinhai (patent No. 201010521662.5). The thickener is equipped with additional deaerating tank, which can eliminate the solid particles attaching to the bubbles. The feeding pipe is designed under the liquid level, which can effectively prevent gas from entering the ore.

An agitation equipment which forces the slurry to take up and down circulation in the tank. Its umbrella shaped impeller presses the slurry in a downward direction, so that the slurry takes up and down circulation along draft tube, which makes reagents and slurry mix well, strengthens the agitation capacity.

A double stages slurry pump with head of 70m. It is lined with high wear-resisting rubber, whose abrasion resistance index is up to128%, the service life is 2-4 times longer than that of metal pump. XPAhigh head wear-resisting rubber slurry pump is a rare rubber slurry pump with integrated effects of wear-resisting, anticorrosion and high head.

chute feeder, manufacturer of chute feeder - xinhai

chute feeder, manufacturer of chute feeder - xinhai

The machine is usually installed underneath the discharging opening of the ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on the idler wheel, and via an eccentric device connected with a reducer which is linked to an electric motor by a coupler. When it works, the electric motor drives a reducer via a coupler; eccentric disk and drain cap which is situated between the chute frame bottom and roller begins to do reciprocal and linear motion to uniformly feed minerals.

hog slat feed bin hopper valve | hog slat

hog slat feed bin hopper valve | hog slat

Hopper Valve Chute is recommended for use only with 9 (228 mm) diameter, 3 ring tanks or smaller (Maximum of 15 tons (13,600 Kg) of feed).Hopper Valve Chute should be mounted no higher than two feet (.61 m) above hopper collar.Important: Feed Tank should be completely empty, with no bridges prior to starting assembly of Hopper Valve Chute.It is recommended that installer of this Hopper Valve Chute wear long sleeve shirt to help minimize risk of scrapes during assembly of bolts from inside of tank.On new tank installations, Hopper Valve Chute should be installed prior to installation of Upper boot and Unloader so that metal shavings and dropped parts will fall through to ground.On existing tank installations, Unloader should be emptied of feed andaccess plates removed so that metal shavings and dropped parts can be remove prior to using system again.

Hopper Valve Chute is recommended for use only with 9 (228 mm) diameter, 3 ring tanks or smaller (Maximum of 15 tons (13,600 Kg) of feed).Hopper Valve Chute should be mounted no higher than two feet (.61 m) above hopper collar.Important: Feed Tank should be completely empty, with no bridges prior to starting assembly of Hopper Valve Chute.It is recommended that installer of this Hopper Valve Chute wear long sleeve shirt to help minimize risk of scrapes during assembly of bolts from inside of tank.On new tank installations, Hopper Valve Chute should be installed prior to installation of Upper boot and Unloader so that metal shavings and dropped parts will fall through to ground.On existing tank installations, Unloader should be emptied of feed andaccess plates removed so that metal shavings and dropped parts can be remove prior to using system again.

Related Equipments