Jumbo CC-S Case Study Bucket Elevator Design Service Bucket Material Selection Guide How To Measure A Bucket Bucket Installation Guide
Bucket elevator is used to vertically lift mashed limestone, coal, gypsum, clinker, dry clay and other block granular materials and raw materials, cement, pulverized coal, and other powder materials. According to the running speed of buckets, bucket elevators can be combined with centrifugal discharge type, gravity discharge type and mixed discharge type. Centrifugal unloading type has a fast bucket speed and is suitable for conveying powdery, granular, small pieces and other abrasive materials; gravity unloading type has a slower bucket speed and is suitable for the lower section with a tensioning drum; mixing unloading type is suitable for conveying loose density <1.5t/m3 powder. There are few sprinkles during the loading and unloading, which reduces mechanical wear. The traction members of the bucket elevator have a chain, a NE plate chain bucket elevator, a plated chain, and a tape. The structure and manufacture of the chain are relatively simple, and the connection with the hopper is also very strong. When the material with large abrasiveness is conveyed, the wear of the chain is small, but its own weight is large. The structure of the plate chain is relatively firm and the weight is light. It is suitable for lifting hoists with large lifting capacity, but the hinged joint is easy to be worn. The structure of the tape is relatively simple, but it is not suitable for conveying materials with large abrasiveness. The temperature of the ordinary tape material does not exceed 60. C, the clamp steel tape allows the material temperature to reach 80 C, the heat-resistant tape allows the material temperature to reach 120 C, and the temperature of the material transported by the chain and the chain can reach 250 C.
Multiple drive combination (depending on the actual needs of the user). The drive platform is equipped with a maintenance frame and railings. The drive system is divided into the left assembly and right assembly.
The TH series bucket elevator is a commonly used lifting device. The bucket elevator uses a forged chain as the transmission part and has strong mechanical strength. It is mainly used for lifting powder and small particles and small blocks. Different from the TD series bucket elevators, the lifting amount is larger and the operation efficiency is higher. It is often used for the lifting of materials with a large specific gravity.
The NE series plate chain bucket elevator is a new type of bucket elevator. It adopts the plate chain transmission, which is different from the old model TB series plate chain bucket elevator. Its naming method is named after the lifting amount instead of the bucket width. For example, NE150 refers to a lifting capacity of 150 tons an hour instead of a bucket width of 150. NE series bucket elevators have high hoist efficiency, and there are NSE models and high-speed chain bucket elevators depending on the speed of the upgrade.
The TG series bucket elevator is a reinforced belt bucket elevator, which is different from the TD series bucket elevator. The TG series bucket elevator uses steel wire tape as the transmission belt, which has stronger transmission capacity. This series of bucket elevators has been used in grain transportation and has long been called a grain-specific bucket elevator.
4B manufacturers plastic, steel and stainless steel elevator buckets and cups for agricultural and industrial applications. With over 400 different sizes and styles, 4B can supply the right product for your bucket elevator.
Our company is committed to rope hoisting belt production more than 10 years, specialized in manufacturing production rope hoisting belt and its accessories: alloy joint clamp, steel plate joint bolts, high-strength galvanized hopper, heat-resistant rubber plate, etc
1). Use the main belt clip to tighten the ends of the belt through bolts. 2) after clamping, peel off the two ends of the lifting belt and strip out the wick. 3) tighten the steel wire rope core of the belt at both ends of the belt. 4). Fill the box with filler filling, fill with glue, wait 15 minutes until set.
APPLICATION Corrugated sidewall Belt Splice & Fastener are mechanical splices for use on most PVCand rubber elevator belts. Each splice unit is made of threepieces. The outside plates have two different gripping areas.The ribbed gripping area is mounted towards the face of thebelt. The opposite end has a series of both longitudinal andaxial teeth. The center plate is symmetrical and cannot beimproperly installed around its elongated center hole.The splice functions by using the tension supplied by the belting.
This tension on the belt ends pulls the outer platesapart, and forces gripping pressure towards the teeth on thesplice unit. The greater the belt tension, the more pressure isexerted on the gripping teeth at the forward end of the splice.
Monster Belting is the custom belt fabricator. Our belts are ideal for bulk handling a wide range of heavy and abrasive materials successfully catering to various industries, stone crushing & screening, sand washing, chemical fertilizer and many more. Welcome to Online communication.