crusher plant eqipment 350 t h

300-350 t/h medium hard stone (limestone) crushing plant solution | quarrying & aggregates

300-350 t/h medium hard stone (limestone) crushing plant solution | quarrying & aggregates

Raw material from the truck falls down to hopper LC4x5M(C1), the hopper works as buffer to protect feeder F5X1360(A1) from impact force. Through the feeder, material is fed to Jaw Crusher PEW860(A2), meanwhile the smaller size stone falls down from grizzly bar area in front part of feeder A1, then it is transported by conveyor to vibrating screen S5X1860-2(A7), the vibrating screen A7 separate out clay from mixed material, stone is transported to middle stock pile.

Big material as 720mm is fed to jaw crusher A2 which works as primary crusher to break big size stone as 720mm into smaller size <160mm, after jaw crusher, all smaller stone now comes to middle stock pile, under the pile there are two vibrating feeder GZD1200*2000(A3) working strongly to feed material to the following conveyor which connects impact crusher PFW1315III(A4).

These two set impact crushers work as secondary stage crusher for medium-coarse processing, after these two impact crushers, there is already some qualified aggregate size <31.5mm, after impact crusher A7 all material is transported to following screens S5X2760-2(A5).

After screening, aggregate 20-31.5mm comes out to be one final product, 0-20mm aggregate is transported to following screen S5X2460-2(A6), these two screens to the final separating work to produce other three kinds product 0-4.75mm, 4.75-10mm, 10-20mm.

The bigger size aggregate >31.5mm after screen A5 goes back to impact crusher A4 passing through conveyor, the impact crusher A4 does the recycling work to crush bigger size material down to 31.5mm until all material pass through screen A5.

Other equipment as metal magnetic separator RCYD-10(A8) is also necessary and important for the crushing line, the magnetic separator A8 can take off steel bars from mixed material to protect following crushers.

Belt Conveyor for ScrapTo get clean products, we use grizzly feeder to remove the dust and other fine waste, which are called scrap. Then its necessary to add a belt conveyor to transport the scrap coming out through the gaps of feeders grizzly bars.

Belt Conveyors for Final ProductsMostly, the max inclined angle of a belt conveyor is 17 degree, so its important to adopt long-enough belt conveyors for final products to guarantee enough space for stocking of products.

stone crushing plant 350-500t/h, stone crusher, stone crushing machine

stone crushing plant 350-500t/h, stone crusher, stone crushing machine

Equipment consists of: vibrating feeder, jaw crusher, fine jaw crusher, or deep cavity "stone at stone" impact crusher, vibrating screen, sand washing machine, belt conveyor. To meet customers high standard demand, it also can be equipped with cone crusher, sand making machine, or dust removal equipment. Process: Raw materials are evenly and continuously conveyed into jaw stone crushing equipment for primary crushing via the hopper of vibrating feeder. The crushed stone materials are conveyed to secondary stage crusher by belt conveyor for secondary crushing before they are sent to vibrating screen to be separated. After separating, qualified materials will be taken away as final products, while unqualified materials will be carried back to the stone crushing equipment for recrushing. And customers can classify final products according to different size ranges. According to different requirements, customers can adjust the size of their final products from this stone crushing plant. Clients will get the satisfactory products after objects being crushed for several times. Dust is generated during the working process while the dust control units are needed. Note: This process is just for referance. All the parameters in the figure dot represent actual parameters, the final configuration will differ according to stone characters and customers application, specifications for stone or sand. Equipment Configuration Products name Model QTY Power(kw) Vibrating Feeder ZSW1300*4900 1 piece 22 Jaw Crusher PE 900*1200 132 Impact Crusher PF1320 2 piece 200*2 Vibrating Screen 3YK2460 30*2 Belt Conveyor B1200 3 piece 7.5*3 Belt Conveyor B800 4 piece 5.5*4 Control Cabinet 1 Total Power: 665.5KW

Equipment consists of: vibrating feeder, jaw crusher, fine jaw crusher, or deep cavity "stone at stone" impact crusher, vibrating screen, sand washing machine, belt conveyor. To meet customers high standard demand, it also can be equipped with cone crusher, sand making machine, or dust removal equipment. Process: Raw materials are evenly and continuously conveyed into jaw stone crushing equipment for primary crushing via the hopper of vibrating feeder. The crushed stone materials are conveyed to secondary stage crusher by belt conveyor for secondary crushing before they are sent to vibrating screen to be separated. After separating, qualified materials will be taken away as final products, while unqualified materials will be carried back to the stone crushing equipment for recrushing. And customers can classify final products according to different size ranges. According to different requirements, customers can adjust the size of their final products from this stone crushing plant. Clients will get the satisfactory products after objects being crushed for several times. Dust is generated during the working process while the dust control units are needed. Note: This process is just for referance. All the parameters in the figure dot represent actual parameters, the final configuration will differ according to stone characters and customers application, specifications for stone or sand.

Related Equipments