double roller crusher for coal salt clay bauxite limestone

high capacity double roller crusher for coal / limestone line - best stone crusher plant solution from henan dewo

high capacity double roller crusher for coal / limestone line - best stone crusher plant solution from henan dewo

Dewo machinery can provides complete set of crushing and screening line, including Hydraulic Cone Crusher, Jaw Crusher, Impact Crusher, Vertical Shaft Impact Crusher (Sand Making Machine), fixed and movable rock crushing line, but also provides turnkey project for cement production line, ore beneficiation production line and drying production line. Dewo Machinery can provide high quality products, as well as customized optimized technical proposal and one station after- sales service.

Double Roll Crushers. Double Roll Crushers typically follow a primary or secondary crusher and are used for secondary and tertiary reduction of various minerals, such as ROM coal, clean coal, limestone, gypsum, trona, shale, bauxite, oil shale, coke, salt, lime, glass, kaolin, brick, shale and wet, sticky feeds.

Double Roller Crusher Overview: The double roller crusher is designed to crush coal in large coal mines and coal preparation plant. The sensor as an overload protection device can ensure the double roller crusher safe and reliable.

Alibaba.com offers 239 limestone double roller crusher products. About 28% of these are Crusher. A wide variety of limestone double roller crusher options are available to you, such as condition, local service location, and key selling points.

Double Roller Crusher [ Capacity ]: 10-85 t/h [ Applicable Material ]: Double roller crusher is mainly used for secondary and fine crushing materials with soft or middle hardness like coal, coke,limestone etc.

double roll crushers | mclanahan

double roll crushers | mclanahan

Double Roll Crushers typically follow a primary or secondary crusher and are used for secondary and tertiary reduction of various minerals, such as ROM coal, clean coal, limestone, gypsum, trona, shale, bauxite, oil shale, coke, salt, lime, glass, kaolin, brick, shale and wet, sticky feeds. They are one of the most widely used crushers in the mining industry and have numerous advantages, such as high capacity, low headroom, low horsepower, the ability to handle wet, sticky feeds and the ability to produce a cubical product with minimum fines generation. Roll diameters and widths are dictated by the feed size, product size and capacity. The rule of thumb for the Double Roll Crushers ratio of reduction is 4:1.

The simplified design gives these units excellent reliability and requires very little maintenance. The crushers are designed with built-in tramp relief that allows for the passing of uncrushable objects while remaining in continuous operation and returning to the initial product setting. With a variety of roll surface designs, this crusher is capable of producing a much finer product. Since each machine is custom engineered, roll elements and tooth patterns are selected depending on each unique application.

McLanahan Double Roll Crushers feature slower roll speeds and a larger surface area to add prolonged life to the crushing elements, resulting in less maintenance downtime and decreasing your cost per ton. Double Roll Crushers generate minimum fines while producing a cubical product.

McLanahan Double Roll Crushers are designed for safety and many years of rugged operation. Effective tramp protection against non-crushable material is provided by an automatic spring-and-toggle system. This allows a movable roll to open, pass the material and return to its original setting for continued operation. Hydraulic product size adjustment allows producers to adjust for changes in product size requirements or to compensate for roll wear.

Operating Double Roll Crushers is quite simple. Whether it is a single or dual drive arrangement, the rolls are powered by electric motors and V-belt drive configurations, resulting in reliable and quiet operation. If it is a single drive arrangement, power is transferred from the driven roll to the non-driven opposing roll by an interstage V-belt drive. If it is a dual drive configuration, each roll is powered independently through a motor and V-belt drive.

During normal operation, the material is fed between the crushing rolls. A combination of compression and shear forces created between the opposing rolls reduce the feed material to the desired product size while producing a cubicle product with minimum fines.

McLanahans mechanical tramp relief systems employ a spring-and-toggle mechanism that activates whenever an uncrushable object enters the crushing chamber. Once an excessive force is applied to the movable roll, the toggles break open to allow the uncrushable item to pass. The high torsion springs then close the toggles, returning the movable roll to the previous setting. The crusher continues to operate uninterrupted.

When an uncrushable object, such as metal, roof bolts/timbers, etc., enters the crusher and the force necessary to crush this material is greater than the crushing forces of the crusher, the crusher allows the moveable roll to open and pass the tramp material and then return to its previous setting and remain in operation.

Depending on the customers desired product size and fines consideration, Mineral Sizers or Hammermills could be considered. The reasons people would consider a Roll Crusher over these alternative technologies include lower power requirements, less fines generation and costs.

Black Diamond Double Roll Crushers are the most versatile and popular model of McLanahan Double Roll Crushers. Ideal for secondary and tertiary crushing applications where product requirements drop down to (6mm), Black Diamond Double Roll Crushers are most commonly used to crush clean coal or friable materials with little or no hard refuse. They are available with single or dual V-belt drive.

Heavy-Duty Double Roll Crushers are ideal for the primary, secondary and tertiary crushing of limestone, gypsum, ROM coal, etc. where higher compressive strength material is anticipated. Due to the V-belt drive design, a lower horsepower is required compared to other crushers designed for the same applications.

Shalemaster Double Roll Crushers are driven mechanically with V-belt drives and gear reducers. They offer the same durability as other McLanahan Double Roll Crushers but are designed to handle wet, sticky feeds such as soft shale, kaolin and clay. The Shalemasters special tooth design and differential roll speeds provide optimum performance against plugging and other problems often associated with handling sticky materials.

Typically used as secondary or tertiary crushers, McLanahan Double Roll Crushers provide a 4:1 reduction ratio and can be used following other McLanahan equipment, such as Feeder-Breakers, Rotary Breakers, primary DDC-Sizers, or Single Roll Crushers, when further reduction of primary crushed material is required. Each Double Roll Crusher is selected and engineered for its specific application, thus roll elements and tooth patterns are selected based on the customers unique applications and designed to produce a cubical product with minimal fines.

roll crushers | mclanahan

roll crushers | mclanahan

Roll Crushers are designed to handle the primary, secondary and tertiary stage crushing of friable materials such as coal, salt, clay, bauxite, limestone and other minerals of similar characteristics in the mining, power generation and numerous other industries. Roll Crushers are one of the most widely used crushers in the mining industry and have numerous advantages, such as high capacity, low headroom, low horsepower, the ability to handle wet, sticky feeds and the generation of minimum fines while producing a cubical product.

The simplified design gives these units excellent reliability and requires very little maintenance. Roll Crushers are designed with built-in tramp relief that allows for the passing of uncrushable materials while continuing operation and returning to the initial product setting.

Since patenting the first Single Roll Crusher in 1894, McLanahan has become an expert and leader in the industry in the design and manufacture of single and two stage Roll Crushers. The selection process for each application is based on extensive equipment knowledge and a wealth of test data developed in our research lab or through on-site testing.

McLanahan offers belt-driven Roll Crushers in four designs: Single Roll, Double Roll, Triple Roll and Quad Roll Crushers, which provide a substantial return on investment by operating at low cost and maximizing yield by generating minimal fines. The rugged design, which incorporates a fabricated steel base frame lined with replaceable abrasion-resistant steel liners, stands up to the toughest mineral processing applications while providing safe and simple operation, including an automatic tramp relief system to allow uncrushable objects to pass while the crusher remains in operation. These crushers are also versatile, allowing for adjustments in roll speeds and gap settings to meet most any application requirement.

Whether the application requires a single-stage or two-stage crusher, the forces necessary to perform the crushing remain the same: a combination of impact, shear and compression. The impact force occurs as the material enters the crusher and is impacted by the rotating roll. Shear and compression forces occur as the feed material is pulled between the crushing plate and/or crushing rolls.

Depending on the feed size, material is fed into the crushing chamber and encounters a single or a pair of rotating rolls. If a two-stage reduction is required, either a Triple or Quad Roll configuration can be used. In this scenario, the top stage of the crusher performs the primary reduction either by crushing the material between the roll and crushing plate or between a pair of rolls. The material is then fed directly between the two bottom-stage rolls for additional processing.

If a single-stage reduction is required, then depending on the feed-to-product-size ratio of reduction, either a Single or Double Roll Crusher can be selected. Regardless of the crusher type selected, Roll Crushers allow for the material to fracture along naturally occurring cleavage lines, which helps with minimizing fines generation.

Yes, it will. When a wet, sticky feed is fed to a two-stage crusher, you run the risk of plugging the crusher between the top and bottom stages. If a wet, sticky feed is anticipated and the ratio of reduction requires two stages of crushing, it is recommended that two separate single stages be used.

A good rule of thumb is: Single Roll Crushers have a 6:1 ratio of reduction, Double Roll Crushers have a 4:1, Triple Roll Crushers have a 6:1 on the top stage and a 4:1 on the bottom stage, and Quad Roll Crushers have a 4:1 on both the top and bottom stage.

Single Roll Crushers are typically used as primary crushers that provide a crushing ratio of up to 6:1. They crush materials such as ROM coal, mine refuse, shale, slate, gypsum, bauxite, salt, soft shale, etc., while producing minimal fines. Designed with intermeshing roll teeth and a curved crushing plate, they are extremely effective in reducing slabby feeds.

Double Roll Crushers provide a 4:1 reduction ratio. They are typically used as a secondary or tertiary crusher for materials such as ROM coal with refuse, limestone, gypsum, trona, shale, bauxite, oil shale, clean coal, coke, salt, quicklime, burnt lime, glass, kaolin, brick, shale and wet, sticky feeds. Each machine is custom engineered with roll elements and tooth patterns selected depending on theapplication requirements to produce a cubical product with minimal fines.

Triple Roll Crushers are ideal for producers who want to accomplish two stages of reduction in one pass. They can be used in coal, salt, coke, glass, and trona operations, among others. Triple Roll Crushers combine a Single Roll Crusher with a Double Roll Crusher to form a crusher that is capable of achieving a 6:1 reduction ratio in the primary stage and a 4:1 reduction in the secondary stage while producing a cubicle product at high capacity.

Quad Roll Crushers are ideal for producers, including those with preparation plants, who want to accomplish two stages of reduction in one pass. They can be used in coal, salt, lime, pet coke and potash operations, among others. Quad Roll Crushers are capable of achieving a 4:1 reduction ratio before feeding the crushed material to the secondary stage for an additional 4:1 reduction to make the final product.

Related Equipments