fri gold aggregate mining equipment manufacturers

mining chemicals - international mining

mining chemicals - international mining

The mining Industry is facing many challenges today as the demand for minerals increases; the ore bodies available are of lower quality and the ores are often more complex / harder to process. Deposits are also getting more remote and more difficult to access.

Mining chemicals form a crucial part of the chain, and are absolutely fundamental to maximising recovery. The industry has both commodity and specialised chemicals but a major issue is the level of investment required by key players to develop new and more advanced solutions, and if this will even happen to the degree necessary if the mining industry is not willing to invest in their use versus cheaper but less effective and less environmentally friendly alternatives.

The market for mining chemicals supply ranges from focussed divisions of global companies such as Clariant, BASF (now owns former Cognis and CIBA chemicals businesses) and Cytec to more specialised dealers and suppliers of mining chemicals, but who also operate globally, such as SNF Flomin and Cheminova; and finally distributors, which are very numerous in local markets but may be sizeable in their own right in particular mining regions.

The global groups have the advantage of being able to provide strategically located offices in the major mining regions to provide the best possible allow local support, which may include manufacturing, testing laboratories and service personnel.

There are also the Chinese players manufacturing and exporting large volumes of mining chemicals from domestic facilities examples include xanthate producer Qingdao Ruchang Trading and Beijing Hengju , Chinas largest manufacturer of powder grade flocculants. However, most of the Chinese-made mining chemicals are not sold directly by manufacturers but almost exclusively through distributors.

As a result of the market division between lower cost product lines and more advanced chemistries, it is also true that some players have withdrawn from the market altogether, or have chosen to focus on particular areas. The downside to bulk low cost supply is a constantly changing environment at the primary feed stock supply sources, with a resulting lack of quality consistency in some cases.

Paul Gould, Global Head of Marketing and Applications, Mining Services at Clariant commented: We are seeing more Chinese manufactured products available globally, either through distributors or as repackaged / resold products through some of the established brands. Over the past few years, we have seen some Chinese reagent manufactures supply Building Block chemicals directly to customers under their own name. This trend will probably continue. This has affected the established suppliers, by causing them to withdraw from the manufacture and sale of some reagents. For example, both Cytec and Clariant have withdrawn from offering xanthates.

Colin Cumberbatch, Marketing Director at FloMin commented: Margins are very tight in mining reagents and over the years several large companies have stopped serving the market. Only a few suppliers offer the entire range of mining chemicals. Niche local suppliers are able to offer some chemicals in their respective countries and do quite well. Some chemistries cannot be economically produced by all players and as a result, some suppliers have unique advantages and are able to offer their products at substantial premiums. That said, new entrants in other chemicals for mining, especially from China, is still driving pricing and profitability lower. Chinese and Indian suppliers may also have a future advantage due to lower standards for chemical production.

In addition to the companies covered here in more detail, other significant players in mining chemicals supply include Akzo Nobel, Betachem, Shell Chemicals, Nasaco, Orica, Ashland Drew, Chevron Philips, Charles Tennant (Prospec), Senmin, Sasol, TallBennet, Mathiesen, Chemserve, Nalco, Dow Chemical and Cheminova and a range of other smaller suppliers.

Reagent chemicals are the key to the flotation process as they actively separate the desired mineral particles from the other minerals, create the bubbles that transport them, and control the overall pH of the tank at a range where the reagents work most effectively.

The main chemical groups divided by application are collectors, which act as surfactants in the flotation cell and adsorb to the surfaces of the valuable mineral particles and make them hydrophobic (water repellant) and frothers, which have the effect of producing stable bubbles in the cell for these hydrophobic particles to attach themselves to.

Other types of chemicals used include depressants, which form a polar chemical envelope around particles and depress the effect of any hydrophobic gangue minerals in the ore that would otherwise report with the froth along with the desired metallic mineral particles. There are also differential or reverseflotation systems, where depressants are used to hold down the desired mineral while floating the undesirable gangue.

Aside from flotation reagents, the industry includes the supply of extraction chemicals such as extractants and diluents; thickeners (flocculants and coagulants) used either as part of a process to thicken tailings for disposal or in the refining process; bulk acids (such as sulphuric acid) used in heap leaching; cyanide for gold processing; anti-scaling chemicals and dust suppressants amongst others.

By far the most widely used reagent collector compound is the xanthate family. Xanthate remains the main chemical used in sulphide flotation with volumes of over 100,000 t/y used and were first marketed in the US in 1928, with dithiophosphates following in 1927 and finally thionocarbamates in the 1950s by Dow. Predecessors of Clariant, Cytec and Dow were all involved in the development and sales of these pioneering chemicals in mining.

Some niche chemistries have been developed as an alternative to xanthates from Cytec and others, but they are still thought to account for less than 5% of the sulphide collector market. Colin Cumberbatch at FloMin comments: Xanthates still dominate the flotation chemicals market due to low cost and familiarity. In some areas they have performed better than other chemistries. Even though there are quality variations among suppliers, customers view them as commodities and bargain for lower prices. The difficulties in switching are compounded by the fact that engineering companies specify xanthates to be lab tested and later used in the mine. As such, budgets do not always allow for a wider range of reagent testing for optimal performance.

The counter argument to that for continuing the status quo is that as the ores become more difficult and even the process water becomes more impure, more tailored and innovative chemical solutions will be needed. Paul Gould at Clariant comments: There is an expression the quality of todays feed is yesterdays tailings. This coupled with the pressure to mine more deposits containing poly-metal ores, and the use of poor quality water sources presents huge challenges to the industry. Investment in new reagent innovations is the key to being able to liberate and achieve economically viable recovers in the future. There is a symbiotic relationship between the mining operations and the reagent manufactures and needs to be recognised. If the trend towards commoditisation of mining reagents continues, the product margins that allow for new research will dry-up. This is where the mining companies can help to support their own futures.

Cytec echoed the need for continued innovation. A spokesperson commented: The landscape of ores continues to change which requires constant innovation in technology for economical treatment. New advances have been introduced by Cytec in flocculant technology, sodalite scale inhibition, promoters and collectors and solvent extraction solutions. One recent development in particular that has gained a lot of market recognition for our company is FLOTATION MATRIX 100. This is a novel strategy for mineral flotation that combines an expert system, proprietary reagent blends and expertise and insights to generate consistent, quantifiable improvements in metallurgical, operational and financial performance.

Mine specific solutions are important, as it is by no means the case that each operation mining a similar ore type will use the same suite of chemicals. Ores differ widely globally and often in small, but significant ways. But this means there is no single mechanical and chemical configuration that could be classed as standard for one ore type globally. For example, Codelco Andina and Anglo American Los Bronces are on the same mineral belt and one opposite sides of the same mountain. They both are floating similar copper sulphides yet one of them uses sodium isopropyl xanthate (SIPX) and diethyl dithiophosphate (DTP) and the other is using O-isopropyl-N-ethyl thionocarbonate (IPETC) as a flotation collector.

Tailoring the right reagents for a specific ore and operation may only make a 0.5- 1% difference in metal recovery, but with high metal prices this difference makes it worth finding the right ones. Mining reagents cannot be treated as an ingredient in a finished product; core characteristics change which affect the composition of the feeds and may even impact the process water conditions. As a result, reagents can bring significant benefit to the performance of the mine or refinery when used wisely.

Nicole Richards, Global Marketing Director, Cytec told IM: Simple identification of the constituent minerals in the ores is usually not enough to guide a beneficiation scheme. Each mine is unique in the type of ore and challenges in treatment. Many times advanced methods for solving increasingly difficult problems from precious, base and industrial mineral operations are needed. Treatment programs and reagents will differ depending on many factors. Although there are no generic chemical solutions that can be used to treat a particular metal or minerals due to the complex interaction of chemical, physicalmechanical and operational factors and the different needs of the operations, there are reagents that act as a good starting point such as AEROPHINE for copper-gold ores, AERO XD5002 for flotation of copper ores containing iron sulphides under mild alkaline conditions, and AERO MAXGOLD 900 as a precious metal collector. But each mining operation requires a unique optimized chemical solution.

Colin Cumberbatch added: Chemical reagents are specific to each type of ore even within a mine site. One customer with two operating mills uses xanthates while the other uses dithiophosphates (DTPs). Some metallurgists may also have preference to oily collectors versus water soluble ones. There may be troublesome impurities present such as clays, which require special reagents. For each ore type mineralogy and geology FloMin offers several reagents based on prior success. It is difficult to predict which will meet the customers goals. Other operating factors such as ore changes, grinding, pH, addition points, and overall plant design contribute to performance.

The market is already very competitive. Logistics are a key driver in the prices of mining chemicals and it often accounts for 20% or more of the overall cost especially for overseas shipments. The suppliers have to constantly evaluate all transportation possibilities that provide the best economy of scale but that also deliver products in a manner that customers expect and on time.

Xanthates are supplied as powders and pellets in plywood covered bulk bags or drums, but for environmental and safety reasons, pellets are preferred. Dithiophosphates are supplied as liquids, while thionocarbamates as liquid and oxide collectors as liquids or pastes. Frothers are all supplied as liquids.

Paul Gould at Clariant comments: As I explain to people who are not familiar with the mining business, our customers are often not only located at the end of the earth, but down a hole at the end of the earth. At Clariant we understand that you cannot run a mineral processing operation without security of supply and so, Clariant Mining Solutions is a global company with strategically located recourses in the major mining regions to the best possible allow local support. Local infrastructure includes manufacturing, testing laboratories and service personnel. The ability to manage inventories in a disciplined way as well as providing additional or different products a short notice due to unexpected demands helps customers maintain high operational uptime.

Nicole Richards at Cytec told IM: Transportation and logistics in the mining industry are certainly a key factor in ensuring reliable delivery and service for any supplier. Each year presents different challenges including availability, costs and reliability of transportation carriers particularly to remote and undeveloped geographies. It is important to understand and manage each situation to ensure quality service is not compromised.

Colin Cumberbatch at FloMin adds: Logistics are very important. Most of the mines are located in remote regions of continents and most mining reagents like xanthates are hazardous cargo. More shipping lines are making it difficult to ship xanthates by sea. Customers are also requesting pricing based on delivery to the minesite including warehousing. This is also a major challenge for global suppliers.

In the formulation of chemicals solutions, minimisation of environmental impact is also always taken into account. Over the last few years, requests for more environmentally sensitive reagents have become more common from the mining companies. This is change and is ahead of government regulations. Projects have even held-up due specifically to environmental concerns.

Also, while ores are becoming increasingly difficult to treat, environmental regulations are becoming more stringent. Water use (or more importantly water conservation) is becoming a major concern. The industry is looking to the mining chemical manufacturers to develop speciality reagents that can meet their needs in treating difficult ores and to allow them to address the environmental and resource challenges.

Innovative chemistries are being introduced that allow regulations on waste water discharge and emission to be met and are cost effective from a total treatment cost perspective. Just as increasing metal prices now make the extraction of dead deposits more economic, the industry foresees a similar impact from new chemistries enabling effective operation under new environmental regulations.

Clariant has a long history of providing collectors (Flotinor, Hostaflot), depressants (Flotol) and frothers (Flotanol, Montanol) for the mining flotation process. It also supplies the Arkomon range of products for dust control.

The company describes its expertise as focussing on meeting the specific needs of customers wherever they are located, which includes iron ore in Brazil, sulphide copper ores in Chile and Peru, tin in Australia and rare earths in North America. However, whatever the ore demands, Clariant states that it is able to provide local support and expertise wherever the customer is located.

The mining business is centred on Clariant Mining Solutions, headquartered in Woodlands, Texas.. This location only deals with mining and does not support other businesses. Clariant Mining Solutions was founded in 1980 and is a business unit of Clariant AG; which is the direct descendant of the multinational chemical companies, Sandoz and Hoechst. Paul Gould comments: While Clariant Mining Solutions is global in reach, it has structured its resources to enable them to focus on local customer needs through strategically located centres of excellence, where Clariant provides regional development, service and manufacturing.

With the more complex requirements of polymetallic ores, rare earths and lower grade deposits, Clariant states that it is continuing to develop chemistries to meet these challenges. This includes expand its operational reach, broadening and deepening its product portfolio and enhancing technical and service offerings through the addition of skilled and knowledgeable personnel who are experts in their fields. Under the byline, Performance and Value Delivered, Clariant Mining Chemicals states that it now seeks to partner with its customers to help them meet the challenges of harder to process and lower quality ores through investment and innovation.

Gould is very upbeat on the current market. He comments: Before joining Clariant, I held mining marketing roles for both Nalco and Cytec, and right now the mining industry is the hottest it has ever been. Chemical companies who formerly had no or little mining products are adding flotation and/or solvent extraction reagents to their portfolio the hope of cashing in. However, the familiar family values of mining reagents remain as important to our customers as they have ever been. These are performance, value, service and security of supply.

Cytec Industries is a global leader in specialty mining reagents and has been supplying the mining industry for nearly 100 years. Nicole Richards comments: Cytec has been redefining the boundaries of mineral processing, enabling our customers to achieve optimal productivity while meeting complex economic, environmental and metallurgical challenges. Our expertise is in three main areas of mining: aluminum processing, mineral processing and solvent extraction. In our main products we are the global leader both in terms of application expertise and market share with on-site technical assistance provided on a global basis. Our customers expect and receive application support as an included element of the Cytec offering.

In minerals processing, Cytec offers specialty collectors, frothers and modifiers, dewatering agents and antiscalants. Other proprietary tools include diagnostic software, statistical process analysis and design, as well as specifically developed laboratory and field tests; many of which have become industry standards.

Solvent extraction of metals remains a core part of Cytecs business, and the company provides highly selective reagents primarily for copper, cobalt, nickel and several rare metals. These extractants provide plants with enhanced kinetics, productivity and throughput. Cytec currently has two distinct product families in this area: organophosphine based-extractants offered under the trademark CYANEX, and its hydroxyoxime extractants offered under the trademark ACORGA.

One area of progress has been in xanthate alternatives. Richards comments: There are limitations with the use of xanthates and other technologies are now being used within the industry. In addition, there are safety, health, and environmental issues related to the usage of xanthates; they are combustible, self-ignite /explode, and release toxic gases such as CS2, COS, etc during storage, shipment and usage. Based on a desire to provide the industry with sustainable solutions , Cytec has developed the XR Series of xanthate replacement products that exhibit a metallurgical profile very similar to that of the xanthates while mitigating the Safety Health and Environmental (SHE) concerns. In addition, this new series of products is cost competitive compared to xanthates. Solving customer needs with novel technology does not necessarily mean higher cost reagents. Cytec focuses on solving our customer needs while offering an attractive value proposition.

Based in Baytown, Texas, FloMin produces a complete range of xanthates (it is the second largest exporter from China), liquid collectors, promoters and depressants for the mining industry. It maintains an inventory of a wide range of frothers from MIBCs to glycol ethers to specialty alcohol blends. For solvent extraction the company offers several modified aldoximes, DEHPA and Ionquest 290 extractants. Industrial minerals markets are supplied with fatty acids, petroleum sulfonates, surfactants, dust control agents, defoamers, and dewatering aids. The parent company SNF is the largest producer of water soluble polymers worldwide including flocculants, dispersants and coagulants as well as feed equipment.

In terms of new product development at the group Colin Cumberbatch comments: There have not been many entirely new chemistries in the market, though there are variations to existing thionocarbamates, dithiophosphates and dithiocarbamates. FloMin has employed some novel approaches to blending existing chemistries have yielded some very impressive products. A large impact has been made by customising frothers rather than using standard MIBC or glycol ethers. Also, there is an emphasis on placing alternative collectors inside of xanthate pellets. We expect to see growth in this area.

The company also stated that it is benefitting from a more broad approach by mining chemical customers: More customers are open to test reagents from multiple suppliers. In the past it was perceived that only a handful of companies were the only credible global supplier of specialty promoters.

ArrMaz Custom Chemicals is an interesting player, as it supplies mining chemicals mainly for the phosphate mining and industrial mineral sectors. This includes anionic collectors, cationic collectors, frothers, pH modifiers, defoamers, polymers, rheology modifiers and depressants. In this niche, it is the market-leader. These industrial minerals also require customised chemical suite solutions. Guoxin Wang, Director, Flotation Technology, at ArrMaz comments: All our flotation collectors are custom-made based on the ore-body characteristics including geological formation and mineralogical composition. For example for phosphate ores, Florida phosphate is sedimentary with silica and clay as main gangue minerals, for which we use anionic collector to float the phosphate, then use cationic collector to further lower the silica content from the rougher concentrate. Even for the phosphate mines in central Florida, we have to formulate the collectors specifically to meet the needs due to difference of ore bodies. For some phosphate deposits in China, the main gangue mineral is dolomite with minor silicate, for which reverse-flotation scheme is applied. We use custom-made anionic collector to float carbonate minerals out to lower MgO and concentrate the P2O5. For our craft, it truly is orebody specific, which is also affected by processing scheme at each location which can also vary significantly.

The group states that some phosphate flotation customers are looking for alternative products from ArrMaz from their traditional suppliers due to short supply and pricing. In terms of new development, the company states that it is constantly working on maximising its reagent performance and cost. For example, it has developed a series of carbonate flotation collectors which can be used extensively for carbonate minerals flotation from phosphate ores worldwide. ArrMaz has also discovered a surfactant to strengthen anionic collectors for silica sand flotation.

Unlike other mining chemical markets, so far China has not supplied any chemicals similar to those ArrMaz specialises in for phosphates and industrial minerals out of China. Conversely, the group is trying to enter China market to meet Chinas needs for chemical solutions in these non-metallic minerals areas. ArrMaz is also introducing its flotation collectors to other industrial minerals industries such as calcium carbonate to help raise customer product standards.

BASFs Mining Solutions business unit operates globally offering a diverse range of mineral processing chemicals and has grown significantly with the acquisitions of Cognis in 2010 and CIBA in 2008. It describes its current strengths as lying in solid liquid separation and solvent extraction; however, the group also has reagents that support other mineral processing applications, such as flotation, grinding and agglomeration.

Tim Foerschler, Communications Director for Fuel and Lubricant Solutions, Oilfield and Mining Chemicals at BASF comments: Within this industry over the last few years, there has been an increased focus by customers to maximise recovery of water/valuable minerals utilising reagents to improve process efficiencies and minimise waste. BASF as the worlds leading chemical company has therefore aligned its offering to meet the challenges faced by the industry through performance improvements of existing offerings and via new innovative and sustainable solutions. Improvements in this respect potentially yield massive savings to mine operators, both in operational costs and reduced capital investment requirements.

BASF also recognises that the mining industry faces many challenges and issues relating to the use of water and the impact of exploration, extraction and residue management on the environment. In order to address this, the company has developed the Rheomax DR (Density & Rheology) range of advanced flocculants. In addition, Rheomax ETD (Enhanced Tailings Disposal) is a patented, novel method of tailings management in which technology is used to change and control the structure and drainage properties of mineral processing residues.

In terms of the commodity versus specialised debate, Foerschler tells IM: Commodity offerings are generally considered to be low priced due to the large volumes and high market saturation of suppliers. Specialty offerings, particularly those that are linked back to crude oil as a key raw material are usually confined to a limited number of specialist producers. For specialty chemicals no new suppliers have really developed in recent years. It is felt this is due to customers requiring a high level of process/application service support coupled with global reach, which new entrants find difficult to meet. He adds: Many chemicals that are used in the industry can be considered to be mature and whilst they may still be defined as fit for purpose they are not necessarily the most effective offering from either an environmental or performance perspective. As a leading chemical supplier BASF continue to invest in innovation and sustainable solutions to solve the industries issues.

Finally, as stated, water is becoming an increasing important resource, and management of water resources (covered in-depth in IMs forthcomingJuly issue). Mining and minerals processing companies are turning to advanced water reuse and conservation solutions as they need reliable supplies of clean water for extracting and processing ore and other materials. GE is one group that is able to offer a complete set of chemical and equipment solutions to help companies improve how they manage their water resources for mining and mineral processing activities. This includes integrated discharge water management/reuse solutions for water recovery, treatment and recycling; and dust control technologies including underground ramp, mine service, haul road and materials handling treatments that are engineered to help reduce water usage and operating costs.

A range of chemical treatment solutions are offered to control fugitive dust emissions while achieving water reductions of up to 90%. GEs dust control approach combines water with an environmentally friendly chemical treatment. Once the product is applied, it renders road surfaces hard, dust-free and non-slippery for an extended period. GE has a mobile water treatment fleet the largest in the world which meets the demand for on-site water treatment through emergency and short-term leases and long-term outsourcing. A complete range of membrane and filtration technologies also provides influent treatment for a diverse variety of non-potable water sources.

The group also offers Zero Liquid Discharge (ZLD) systems use advanced evaporation and crystallisation technologies that eliminate wastewater discharge and enable recovery of valuable by-products. Other GE technologies enable heavy metal removal to improve wastewater quality and water treatment systems to provide deposit and corrosion control in mining process systems. Distinct chemical solutions include boiler, cooling and industrial process chemicals -and monitoring to improve plant productivity while safeguarding assets to ensure environmental protection.

GE offers water and process technology solutions to help operators address calcium carbonate fouling and various scaling issues associated with the cyanide leach process, which requires vast amounts of water. Fouling restricts flow in piping, pumps and in distribution emitters. It also causes scaling on the activated carbon and all system hardware. In the gold leach process, calcium in the solution may be the result of calcium ions already present in the water or from the addition of lime for pH adjustment. Carbonate can be contributed by freshwater addition or by adsorption from the air. Increasing the pH, temperature, conductivity, alkalinity, or any ionic species concentration, will increase the scaling potential by moving the equation equilibrium to the right. Suspended solids in the system will also promote calcium carbonate precipitation. Not all system fouling is attributed to scale deposits. It may be the result of mud transported into the system, sludge pumped from the ponds, carbon fines or other foreign debris. Also, not all scales are composed of calcium carbonate; however, in the cyanide leach circuit, a very large percentage of scale is calcium carbonate. Scale that is made up of other species usually will not deposit if calcium carbonate is controlled. An examination of the deposit will reveal which type of fouling is present. Controlling the negative effects of scale formation requires strict management control of operations. Understanding that most gold leach circuits are carbonate-limited more often than calcium-limited also helps. When adding a reagent that increases the carbonate or bicarbonate concentration or elevates pH, it must be done at a location that will permit harmless precipitation to occur.

South Africa-based Axis House supplies a full range of mining reagents to mineral processors. The range includes flotation reagents such as collectors, depressants, froth modifiers and flocculants; leaching reagents would include pH modifiers, acids, flocculants, solvent extractants and diluents. Axis House is known for the pioneering work that has been done in its in-house laboratories in Cape Town and Sydney developing specifically tailor-made oxide mineral flotation agents, the codevelopment of a low flash-point diluent, as well as being involved in the development of higher performing precipitation agents in copper and cobalt circuits.

In 2008, Axis House acquired the chemical business from ASX-listed Ausmelt. This broadened the companys oxide flotation offering of sulphidisation reagents (and their successful application); modified fatty acids and amines (Rinkalore range) to also include the Ausmelt range of hydroxamate oxide collectors. This move enabled Axis to offer a full range of oxide flotation reagents. Trevor McLean-Anderson, Managing Director commented: Owning the technology also allows us to improve it, something we do in conjunction with our clients and AECI group company Industrial Oleochemical Products.

In the flotation of oxides it used to be thought that sulphidisation was the only commercial route available to plant metallurgists, but Axis House has been supplying modified fatty acids and amines for this purpose since its inception and Ausmelt flotation reagents have now been used commercially on more than eight plants internationally. IM

centrifugal concentrators for fine gold recovery | dove

centrifugal concentrators for fine gold recovery | dove

DOVE is a manufacturer of the most advanced Centrifugal Concentrators, designed for 100% recovery of ultrafine gold, silver and platinum group of metals. DOVE Centrifugal Concentrators are supplied in 4 models, capacity range of 5-60 Tons/Hour.

DOVE Centrifugal Concentrators are designed with fully integrated and closed circuit, stand alone high pressure/multistage pump, to insure continuous recovery of ultrafine gold with no gap in pressure.

DOVE Centrifugal Concentrators are designed and configured with high G-force for automatic and continuous recovery of ultrafine gold, silver and platinum group metals, with highest recovery down to 0.04 mm (0.0016 inches).

DOVE laboratory will assay your ore samples rapidly and analyze your raw materials and recommend the most efficient processing plant according to the ore specifications, minerals composition, and ore assay results, and your project size and the geologic and topographic conditions of your mine.

aggregate washing equipment & screens | portable jaw crusher

aggregate washing equipment & screens | portable jaw crusher

At AMI we carry or can locate most brands of used aggregate equipment. If you are looking for a specific piece of used aggregate equipment that we do not currently have in inventory, please contact us and we will gladly assist you in locating the specific item you need.

AMI is a full service aggregate company that can get you the bare equipment, support structures, portable plants, skid mounted plants or complete turnkey systems you need. Please view our past projects and feel free to contact us.

As one of the Astec companies, Telsmith designs, manufactures and markets and services a full line of processing equipment including jaw crushers, cone crushers, impact crushers, screens, and feeders. Brand names such as Iron Giant, Gyrasphere and Vibro-King have gained worldwide recognition for quality and performance.

Hazemag has grown to become a leader of impactor design and control technology. They are very much a part of the North American aggregate and mineral processing scene, serving the cement, aggregate and mineral processing industries. Hazemag impactors are designed with function and simplicity in mind.

Terex Canica has been a leader in the crushing industry since introducing its first Vertical Shaft Impactor. The Terex Canica VSI features gradation control, high product yield with low horsepower per ton, a non-plugging crushing chamber and simple maintenance.

In 2000, the name Thor Steel Welding Ltd. was officially changed to Thor Global Enterprises Ltd. Thor Global continues to lead the competition in terms of continued innovation, strength and simplicity, advanced technology, more standard features than any other manufacturer and the most telescopic experience. Thor has provided hundreds of telescopic machines in the most demanding environments worldwide (North America, South America, Europe, Africa, Australia and the Middle East).

Allied Construction Products, LLC is a leader in innovative construction product technology. Allied designs, manufacturers and distributes these innovative specialty products primarily for the construction and mining industries and for other industries/applications where its products are readily adaptable.

Anaconda Equipment International designs, manufactures and exports an extensive range of mobile screening and mobile stockpiling equipment for use in the mining, quarrying and material recycling industries. Our ranges of tracked and wheeled mounted products are robust, user friendly and easy to move on and off site.

zacks industry outlook highlights: caterpillar, komatsu, h&e equipment services, terex corp and manitowoc company

zacks industry outlook highlights: caterpillar, komatsu, h&e equipment services, terex corp and manitowoc company

Chicago, IL June 25, 2021 Today, Zacks Equity Research discusses Construction & Mining Equipment, including Caterpillar Inc. CAT, Komatsu Ltd. KMTUY, H&E Equipment Services,Inc. HEES, Terex Corporation TEX and The Manitowoc Company, Inc. MTW.

After being impacted by the COVID-19 pandemic last year, the ZacksManufacturing - Construction and Miningindustry seems to be coming out of the woods, aided by the reopening of businesses as evident from the pick-up in manufacturing activity lately. However, the industry is currently grappling with higher input and logistic costs, and labor shortages.

Meanwhile, industry players likeCaterpillar,Komatsu,H&E Equipment Services,Terex Corp andThe Manitowoc Company are cutting down costs, improving efficiency and investing in digital initiatives to drive growth.

The Zacks Manufacturing - Construction and Mining industry comprises companies that manufacture and sell construction, mining, and utility equipment. They support customers using machinery in the construction of commercial, institutional and residential buildings, and infrastructure projects. Their equipment is also utilized in underground mining, drilling, and mineral processing, and surface mining to extract and haul copper, iron ore, coal, oil sands, aggregates, gold and other minerals and ores.

The products are varied, including loaders, pavers, dozers, excavators, concrete mixer trucks, crushing, pulverizing & screening equipment, tractors and cranes. The industry participants also provide support to oil and gas, power generation, marine, rail and industrial applications through their reciprocating engines, generator sets, gas turbines and turbine-related services.

Higher Costs & Supply Chain Woes Remain Concerns:The industry is currently facing input cost inflation (mainly steel), transport and logistic costs. It is struggling to keep up with the increase in demand due to shortage of labor and supply chain issues. Notably, the industry players are making every effort to bolster their financial condition, conserve cash and improve profitability.

The companies have been implementing cost-reduction actions, which are likely to help sustain margins in this scenario. Furthermore, these companies are focused on streamlining their operations and realigning around high-growth key markets or customer segments to boost performance.

Pickup in Industrial Activity Bodes Well:The COVID-19 pandemic had dealt a severe blow to the industry early last year as it led to factory closures worldwide, supply-chain disruptions, low demand and logistic costs. However, gradual resumption of global economic activities and reopening of businesses have led to a pickup in industrial activity.

Notably, U.S. industrial production increased 0.8% in May the third straight month of growth. Manufacturing production advanced 0.9% and production at mines rose 1.2%. The U.S manufacturing sector is being supported lately by the massive coronavirus relief stimulus, low interest rates and sustained higher demand for goods. Further, manufacturing activity has been improving in other parts of the world as well.

Improvement in Mining & Construction Instills Hope:Improving commodity prices will trigger the resumption of spending in the mining industry. This will boost the top-line performance of mining equipment manufacturers. In the United States, solid prospects of the housing market, backed by the rising need for more work-at-home spaces and record-low mortgage rates, are expected to act as a tailwind for construction equipment manufacturers.

Also, the government's plans to increase investment in infrastructure construction particularly in critical sub-sectors such as transportation, water and sewerage, and telecommunications will support demand in the coming years. In China, the governments stimulus program focused on new infrastructure and urbanization will fuel demand for equipment.

Investment in Digital Initiatives to be a Game Changer:The industry participants are investing in digital initiatives like AI, cloud computing, advanced analytics and robotics. Digital transformation aids the organizations in boosting productivity, increasing efficiency, reliability and safety, thereby enhancing customer satisfaction.

Further, with the growing focus on cutting down carbon emissions, mining companies around the world are relying on autonomous machinery. Thus, the companies are stepping up their research and technological capabilities to bring products into the market equipped with the latest technology.

The groupsZacks Industry Rank, which is basically the average of the Zacks Rank of all the member stocks, indicates dim prospects in the near term. The Zacks Manufacturing - Construction and Mining industry, which is part of the broader ZacksIndustrial ProductsSector currently, carries a Zacks Industry Rank #130, which places it at the bottom 48% of 252 Zacks industries.

The industrys positioning in the bottom 50% of the Zacks-ranked industries is a result of negative earnings outlook for the constituent companies in aggregate. Looking at the aggregate earnings estimate revisions, it appears that analysts are gradually losing confidence in this groups earnings growth potential. In the past month, the industrys earnings estimates for the current year have gone down 1%.

On the basis of forward 12-month EV/EBITDA ratio, which is a commonly-used multiple for valuing Manufacturing - Construction and Mining companies, we see that the industry is currently trading at 11.16 compared with the S&P 500s 17.23 and the Industrial Products sectors trailing 12-month EV/EBITDA of 19.24.

The company is anticipated to gain on strong demand in China, pick-up in manufacturing activity, strength in residential construction in the United States, solid construction demand in Brazil and improving mining fundamentals. Its enduring commitment to cost control will keep driving margins. Caterpillar continues to focus on customers and future by continuously investing in digital capabilities, connecting assets and jobsites, and developing the next generation of more productive and efficient products, which provides it a competitive edge.

The Zacks Consensus Estimate for the companys ongoing-year earnings has moved up 18% over the past 60 days. The company has a trailing four-quarter earnings surprise of 41.6%, on average. Notably, Caterpillar has an estimated long-term earnings growth rate of 12%. Shares of this Zacks Ranked #2 (Buy) company have gained 71.6% in the past year.

The company continues to grow its fleet, and the fleet age as of Apr 30, 2021 was 41.5 months compared with the industry average of 52.5 months. This provides it an edge over its competitors. H&E Equipment will gain on its acquisition strategy that focuses on identifying and acquiring rental companies to complement its existing business, broaden geographic footprint, and increase density in existing markets.

Efforts to grow its Parts and Services operations will yield results as it is a relatively stable high-margin revenue source. It also aids in developing customer relationships, attracting new customers and maintaining a high-quality rental fleet. Pick-up in spending in the construction industry will translate into higher revenues for the company.

At present, the stock carries a Zacks Rank of 2. The Zacks Consensus Estimate for this years earnings has been revised upward by 10% in the past 60 days. The company has a trailing four-quarter earnings surprise of 67%, on average. The company has an estimated long-term earnings growth rate of 33.4%. The companys shares have appreciated 91% in the past year.

Komatsu continues to strengthen the Autonomous Haulage System (AHS), in sync with its growth strategies. The company has increased the total number of AHS trucks in operation to 352 units in fiscal 2020, surpassing its target of 330 units.

It also continues to accelerate the speed of achieving digital transformation at construction workplaces through SMARTCONSTRUCTION, which will provide it a competitive edge. The company is also developing its product portfolio. Moreover, it will benefit from its cost-reduction efforts. Additionally, demand for mining equipment will remain steady in iron ore, copper, and gold mines, while it will be on path to recovery in coal mines.

The Zacks Consensus Estimate for the companys current-year earnings has been revised upward by 2% over the past 60 days. The company has a trailing four-quarter earnings surprise of 32.9%, on average. Komatsu has an estimated long-term earnings growth rate of 9.3%. The stock has gained 25% in the past year. It currently carries a Zacks Rank #3 (Hold).

Terex is advancing well on its Execute, Innovate, Grow strategy that will help drive cash flow and profitability. It continues to invest in innovative products, expansion of manufacturing facilities and adding scope through acquisitions.

The company strives to continuously develop its product offerings by applying technology and investing in connected assets and digital capabilities to better serve customers. At the same time, it remains focused on maintaining a strong liquidity and cash position. The companys efforts to right size its cost structure will help bolster margins.

The Zacks Consensus Estimate for the companys earnings for the ongoing year has moved north by 9.3% over the past 60 days. The company has a trailing four-quarter earnings surprise of 307%, on average. This Zacks #3 Ranked stock has soared 138% in the past year.

The companys innovation pipeline remains robust, which will continue to aid it in leading the industry by providing differentiated products that add value to customers. Manitowocs aftermarket business also continues to perform well.

Growth is primarily stemming from higher-margin parts and services. It remains focused on improving this crucial part of the business. The company remains committed to cash preservation and balance sheet management while funding critical programs for future growth.

Given that the tower crane market in China is the largest tower crane market in the world, Manitowoc is scaling up its Chinese tower crane business. It is also expanding its tower crane rental fleet in Europe. These strategic initiatives along with the companys pursuit of acquisition opportunities to accelerate product development programs in its all-terrain product line will help drive long-term growth.

The Zacks Consensus Estimate for this years earnings have gone up 61% in the past 60 days. The company has a trailing four-quarter earnings surprise of 67%, on average. The company has an estimated long-term earnings growth rate of 10%. This Zacks #3 Ranked stock has surged 120% in the past year.

It could become the mother of all technological revolutions. Apple sold a mere 1 billion iPhones in 10 years but a new breakthrough is expected to generate more than 77 billion devices by 2025, creating a $1.3 trillion market.

Zacks Investment Research is under common control with affiliated entities (including a broker-dealer and an investment adviser), which may engage in transactions involving the foregoing securities for the clients of such affiliates.

Past performance is no guarantee of future results. Inherent in any investment is the potential for loss. This material is being provided for informational purposes only and nothing herein constitutes investment, legal, accounting or tax advice, or a recommendation to buy, sell or hold a security. No recommendation or advice is being given as to whether any investment is suitable for a particular investor. It should not be assumedthat any investments in securities, companies, sectors or markets identified and described were or will be profitable. All information is current as of the date of herein andis subject to change without notice. Any views or opinions expressed may not reflect those of the firm as a whole. Zacks Investment Research does not engage in investment banking, market making or asset management activities of any securities. These returns are from hypothetical portfolios consisting of stocks with Zacks Rank = 1 that were rebalanced monthly with zero transaction costs. These are not the returns of actual portfolios of stocks. The S&P 500 is an unmanaged index. Visit https://www.zacks.com/performance for information about the performance numbers displayed in this press release.

Want the latest recommendations from Zacks Investment Research? Today, you can download 7 Best Stocks for the Next 30 Days. Click to get this free reportThe Manitowoc Company, Inc. (MTW) : Free Stock Analysis ReportCaterpillar Inc. (CAT) : Free Stock Analysis ReportTerex Corporation (TEX) : Free Stock Analysis ReportKomatsu Ltd. (KMTUY) : Free Stock Analysis ReportH&E Equipment Services, Inc. (HEES) : Free Stock Analysis ReportTo read this article on Zacks.com click here.Zacks Investment Research

The U.S.-listed shares of several Chinese electric-vehicle makers were trading down on Wednesday after the Chinese government imposed restrictions on ride-hailing giant DiDi Global (NYSE: DIDI) following its initial public offering in New York. Li Auto (NASDAQ: LI) was down about 4.6%. NIO (NYSE: NIO) was down about 6.9%.

For the third day in a row, Carnival Corp. (NYSE: CCL) stock is sinking -- down 3% as of 1 p.m. EDT. Consider: As my fellow Fool Travis Hoium explained Tuesday, investors are upset with Carnival's decision to buy back $2 billion worth of its 11.5% senior secured notes due 2023. Now, on the one hand, that move will cut into the $9.3 billion in cash Carnival had on hand to carry it through the rest of the pandemic.

(Bloomberg) -- U.S. futures slumped with stocks amid growing anxiety that the spread of Covid-19 variants will upend growth expectations, undoing popular reflation trades. Bonds rallied.Contracts on the the S&P 500 and Nasdaq 100 fell 1%, signaling a retreat from new records set Wednesday in the underlying gauges. European equities tumbled more than 1%, with declines led by cyclically-sensitive banks and commodities firms. Ten-year U.S. Treasury yields continued their descent to the lowest level

Stock investors are watching the dramatic moves in the Treasury market for clues on the fate of one of this years most successful plays - the so-called reflation trade that helped power shares of economically sensitive companies higher after nearly a decade of underperformance. Investors piled in to shares of energy producers, banks and other companies expected to benefit from a powerful economic rebound earlier this year while betting that Treasury yields, which move inversely to prices, would rise. While stock markets appear placid, with the S&P 500 hovering near a record high, a rotation beneath the surface has accelerated in recent weeks, as investors move out of economically sensitive names and back in to the big technology and growth stocks that led markets higher for most of the last decade.

Shares in so-called meme stocks with a following among retail investors lost ground on Wednesday, with AMC Entertainment shares down 8.1%, on track for their fourth straight day of declines, and GameStop Corp falling 4.9%. AMC, which fell almost 12% in the previous three sessions, hit a record high of $72.62 in early June as members of social media platforms including Twitter and Reddit's WallStreetBets urged each other to buy the stock. The cinema operator, which on Tuesday scrapped a shareholder approval request for an increase in the number of shares outstanding, was trading at $45.91 after breaching its 30-day moving average.

The stock market has been choppy this week, and Wednesday brought some new fears to the table. Market participants are looking closely at rising incidence of new COVID-19 variants, which could threaten to bring yet another wave of cases to areas where vaccination rates have been less than ideal. Moderna (NASDAQ: MRNA), BioNTech (NASDAQ: BNTX), and Novavax (NASDAQ: NVAX) were all sharply lower on the day.

Alibaba Group (BABA) is the worlds largest e-commerce company. It is based in China with a growing presence in several other countries. Overall, the company has a similar business model to Amazon, as its core e-commerce business is complemented by cloud computing, digital media and entertainment, logistics, and other innovative tech businesses. The company is growing rapidly thanks to its numerous competitive advantages. Its large consumer and seller networks combine to form a virtuous cycle th

Workhorse Group (NASDAQ: WKHS) stock opened at $13.85, dropped to a low of $12.43 during the day and closed at $12.51, a one-day tumble of 9.61% on Wednesday. Shares in Workhorse, a maker of electric trucks, have been a favorite among retail investors and were as high as $17 last week. Workhorse, which lost out to Oshkosh Defense, a division of Oshkosh, on the contract to make the next-generation vehicles for the U.S. Postal Service, has lodged a formal complaint with the Federal Claims Court regarding the bid process.

Shares of Dare Bioscience Inc. rocketed 63.1% in very active premarket trading Wednesday, after the California-based health care company said it was awarded a new grant of up to $48.95 million from the Bill & Melinda Gates Foundation. Trading volume spiked up to 18.1 million shares, compared with the full-day average of about 3.7 million shares. The new grant is to support the development and preclinical activities to advance Dare's investigational reversible contraceptive, DARE-LARC1, toward te

Lemonade (NYSE: LMND) was one of the hottest tech IPOs of 2020. Since then Lemonade's stock price tumbled to about $60 by mid-May. The Texas winter storm in February sparked an unexpected surge in insurance claims, while inflation concerns in the broader economy torpedoed frothier growth stocks like Lemonade. Lemonade's stock price has subsequently rebounded above $100 a share again, but is this volatile stock worth buying at these levels?

In this article, we will be looking at the 10 best cruise stocks to buy now. To skip our detailed analysis of the leisure travel industry and its future outlook, you can click to see the 5 Best Cruise Stocks to Buy Now. When travel restrictions were put in place because of the outbreak of []

In this article, we discuss the 10 stocks Reddits WallStreetBets is buying in July 2021. If you want to skip our detailed analysis of these stocks, go directly to the 5 Stocks Reddits WallStreetBets is Buying in July 2021. Reddit forum WallStreetBets, with a user base of more than 10.6 million, has become one of []

Say green economy, and what is the first thing you think of? Renewable fuels, electric cars, solar power farms, wind turbines, hydrogen fuel cells, recycling plants these are all components of the green economy. The economic sector is currently small, compared to the US near-$20 trillion annual economic output, but its politically potent and gaining in importance year by year. And as they expand, green industries bring more and more opportunities to investors. Those opportunities, however,

Related Equipments