Produce cracked corn for your enterprise with amazing efficiency in both space and power. Available in two sizes with multiple motor size options. Reliable, easy to adjust and customizable roll configurations fine-tuned to your application.
Beef cattlemen, dairymen, feed mills, to name a few, need a way to efficiently produce high-quality cracked corn. It was that need that spawned the Horning stationary roller mill. Multiple options, and no-nonsense engineering make these units a favorite of many happy owners.
The smaller sized Horning mill is just perfect for small farmers and mills. Featuring a 2 belt drive with output volumes from 250 to 330 bushels per hour, this fella packs a big punch for its size. Available with a 5HP single phase or three phase motor, it can be customized for a host of applications.
Dimensions: 26W x 35D x 39.5 to 45.5 H (adj. height) Weight: 448lbs w/o motor Discharge Hopper Clearance: 8.42 to 14.42 Motor: 5HP - 1ph or 3ph Rolls: 4, 6, 8 or 10 groove rolls Shaft: 1.75 Shaft Drive: 2 belt drive (no chains & sprockets to maintain) Roll size: 8.5 dia x 10 wide rolls Dry Corn Capacity: 6-cut: 330 bu/hour 8- cut: 260 bu/hour 10-cut: 250 bu/hour Small Grain Capacity: Approx 30% less then dry corn Motor & roll grooves need to be specified per order
This model will take production to the next level. Three belts propel the drive on this clydesdale and it boasts output volumes between 400 and 800 tons per hour. It is available with either a 10HP single phase or a 15HP three phase motor.
Dimensions: 40W x 42D x 40.75 to 46.75 H (adj. height) Weight: 765lbs w/o motor Discharge Hopper Clearance: 6.25 to 12.25 Motor: 10HP 1ph 15HP 3ph Rolls: 4, 6, 8 or 10 groove rolls Shaft: 1.75 Shaft Drive: 3 belt drive (no chains & sprockets to maintain) Roll size: 8.5 dia x 24 wide rolls Dry Corn Capacity: 6-cut: 800 bu an hour 8-cut: 600 bu an hour 10-cut 400 bu an hour Small Grain Capacity: Approx 30% less then dry corn Motor & roll grooves need to be specified per order
The Fibertech processor I purchased was a huge improvement to my corn silage harvest. It was easy to install, and directions were laid out well. Adjusting the rolls using only one wrench makes it easy to switch back to haylage harvest. The processor does an excellent job shredding and processing. I have used every processor on the market and the Fibertech processor is at the top. Thank you for a quality product.
We really like the way the new Horning heads perform in all crop conditions. Wear points are easily serviced, and breakdowns have been few. Service is minimal and all bearings are greaseable. We are very pleased with the head so far.
The roller grain mills of Rostselmash are designed for uniform crushing of grain crops (wheat, rye, barley), legume seeds and oilseeds. They can be used as independent machines, and also as a part of technologica...
Product Description small animal water pto-feed-grinder per/h 5ton corn grinder feed mill machine Split combination It can easily enter the elevator and is convenient for installation. Details Images Top Quality ...
*Options shown in image sold separately and not included in price.* COLORADO MILL EQUIPMENT ROLL10 ROLLER MILL The MILL-ROLL is the most affordable heavy-duty roller mill built in North America. Whether your roll...
*Options shown in image sold separately and not included in price.* COLORADO MILL EQUIPMENT ROLL7 ROLLER MILL The MILL-ROLL is the most affordable heavy-duty roller mill built in North America. Whether your rolle...
This system was installed in 2016. It has low hours and the owner is no longer in the US. Ready to be removed! - Hopper with chain in the bottom - Screw feeder from hopper to conditioner - Bhler 520/138 pellet ...
Tiller Maschio C 300 - 3m with cage roller or tooth packer roller Cage roller or tooth packer roller Roller mounting kit hydr. Cam clutch Lighting with warning signs incl. bracket and cabling basic equipment: - w...
BMH Roller Mill, belt driven, would drive off pto pulley or Fordson Major type pulley, substantial piece of equipment, located close to Gatwick airport, loading/ delivery, final price plus vat, more info please
The TMV-510G is engineered for efficient production of precision graphite electrodes and similar items. This milling machine was solely designed for machining electrodes in graphite with particular attention paid to high spindle speeds, material containment and compact size that consumes very little valuable floor space.
Higher spindle RPMs are needed for faster program feed rates to achieve finer finishes. The standard RPM for the Tongtai TMV-510G is 20,000, but higher spindle speeds are offered as an option. Program feeds rates in graphite mills are also necessary for highly complex programs that are often created to cut graphite. This combination of fast RPMs and program processing is necessary for producing the finest of electrodes.
Special seals and covers are also specifically designed to protect graphite milling machines from typical wear and tear that graphite dust loves to offer. Contaminating components such as spindles and ballscrews can be very costly both in repairs and downtime. However, contamination of nearby machines can also occur, as can health issues to operators, so preventing graphite dust from escaping the work envelope is imperative.
Dust collection and containment components designed in tandem with a CNC machine tool are critical to managing and collecting graphite dust produced during milling, and the Tongtai TMV-510G is no exception. Absolute offers Donaldson Torit CFM dust collectors and filtration systems with piping to evacuate and collect fine graphite dust, however, other major brands of such systems can also be considered if there is a preference.
The use of graphite electrodes is common in the EDM process, providing an economical solution compared to other electrode materials, and less wear on the electrode itself. Absolute also offers a wide selection of AccuteX Die Sinkers for burning.
The AccuteX Die Sinker DS ZNC (manual) series of four RAM-type EDM machines can handle maximum workpiece sizes from 38 x 22 x 14.9 (965 mm x 558 mm x 378 mm) to 67 x 39 x 22 (1700 mm x 990 mm x 558 mm). Its optional COC-280 Orbit Cut System, when added to the standard Automatic Z Axis Step function, performs like a full 3D machine producing super fine finishes down to 0.18 Ra m and accuracies to 0.0002 easily and efficiently.
The AccuteX Die Sinker CMAX Series is a RAM-type CNC EDM machine offering a full range of 10 different model sizes and capabilities. The fully functional C-Axis can be fit with any commercial chuck for electrode holding compatibility and can hold up to 50 pounds. Shuttle and rotary automatic electrode changers or standalone FANUC or Mitsubishi robot can be installed to accommodate untended operations from roughing to finishing changing electrodes and work pieces.