hammer crusher share

11 differences between impact crusher and hammer crusher (with price analysis) | fote machinery

11 differences between impact crusher and hammer crusher (with price analysis) | fote machinery

Although the hammer crusher and impact crusher are somewhat similar in appearance, they are quite different. How to choose between the two? This article will compare them from the scope of processing materials, structure, price, output, etc.

Impact crusher: It has a relatively large crushing cavity, so the material is not only impacted by the hammer, but also repeated impacts between the material and the impact plate, and between the material themselves.

That is, the rotor operates clockwise inside the impact crusher, while in the interior of the hammer crusher, the rotor operates counterclockwise. The hammer head strikes along the direction in which the material falls.

Hammer crusher: Due to the overhanging state of the hammer head of hammer crushers, the wear occurs on the upper, front, back and side. Compared with the plate hammer, the hammer head is more seriously worn with the metal utilization rate about 35%, and the rotary body itself may also be worn.

Impact crusher: The plate hammer and the rotor are rigidly linked inside the impact crusher, that is, the plate hammer is fixedly installed on the rotor. It can make full use of the inertia of the entire rotor with great speed and kinetic energy to impact the material during crushing.

Impact crusher: There is no screen grate at the bottom of the impact crusher, so the adjustment of the product particle size is mainly controlled by adjusting the rotor speed or rotor diameter, the opening size of the distributor and the gap of the grinding chamber.

Therefore, in situations where cubic particles are needed, for example, the anti-skid pavement of high-grade highway, the impact crusher can be used as the crushing equipment to produce concrete aggregates.

The crushing granularity of the heavy hammer crusher is larger, and the reference price is about $5,000-180,000. The heavy hammer crusher can form a single production line to simplify the crushing process.

Impact crusher: Relatively speaking, the material is not prone to be clogging in the impact crusher. Firstly, it can be equipped with a heating device to prevent the material from blocked due to adhesion.

Secondly, there is no grate at the bottom of the impact crusher. The product size is determined by the gap between the impact plate and the plate hammer. Therefore, it can be used to handle materials with excessive water content to avoid blocking the grate.

It only takes one shift to replace a set of plate hammers and the replacement of the grinding rod in the bottom grinding chamber takes only a few minutes, which greatly reduces the time and cost of overhaul and maintenance.

Hammer crusher: There are more than 100 hammer heads in the hammer crusher. It takes a lot of time and manpower to replace one set of hammerheads, and the cost of overhaul and maintenance is high. The replacement of the bottom screen is also extremely troublesome.

Fote has been engaged in the production of mining machines for 38 years and has accumulated rich experience in equipment production. According to customer needs, through on-site surveys, we can select more suitable crushing equipment for you to improve your investment profits.

As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.

Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.

5 types of glass crusher for sale | fote machinery

5 types of glass crusher for sale | fote machinery

Glass is one of the commonly used material in people's production and daily life. It is widely used in construction, chemical, medical, automotive, engineering, instrumentation, and other industries.

Waste glass is on the rise due to the popularization of glass. Meanwhile, the recycling of glass waste reduces the discharge of garbage, achieves the goal of environmental protection, and brings good benefits for investment users.

The glass crusher can process various waste glass such as glass pieces, glass bottles, automobile glass, bulletproof glass, industrial glass tubes, and other glass products into various shapes of granular, fibrous, powdery, etc.

The traditional jaw crusher is a primary crushing equipment, and Fote Heavy Machinery has improved the jaw crusher in its design so that it can be used for fine crushing and suitable for glass recycling.

Since Fote jaw crusher has a deep crushing cavity, glass can be crushed and processed by squeezing, grinding and other methods. At the same time, glass jaw crusher has the characteristics of large crushing ratio and a wide range of application which can crush various glass such as beer bottles and automobile glass with different hardness.

Given that glass is a highly brittle material thatmay cause some splashes during the crushing process, Fote glass jaw crusher has been designed with a semi-closed vertical curtain at the feeding port, which can prevent the splash of materials, and play the role of noise reduction and dust sealing.

Theglass jaw crusher is the highly productive equipment with the capacity of1 to 500 tons per hour. And the glass crushing machine has a complete model series to meet the different needs of customers.

The glass can be easily crushed by the impact force produced by the high-speed hammerhead of the glass hammer crusher. Simultaneously, this work requires the hammerhead to have strong wear resistance.

The gap of the grate at the discharge port can be adjusted to control the product size. The glass crusher has a wide range of adaptation, advanced structural design, good sealing of frame, and produces low noise and little pollution.

Glass roll crusher has a simple design, a small footprint, and is easy to install and replace its components. It is equipped with a dustproof board, improving the sealing performance and avoiding the splash of glass dust.

The glass impact crusher can handle glass waste with large water content, if the glass material contains too much water, it could be reduced by the heating device installed on the feeding port and impact plate.

Glass impact crusher can effectively control the discharge particle size and has a wide adjusting range of discharging port. It can control the output size by adjusting the rotor speed, the impact type and the gap of the grinding chamber.

The glass crushing process has very little wear on the impact crusher. When the glass material is broken by the impact crusher, it will hit the front of the hammer plate without any touch with the back and sides of the machine.

Due to the large hammerhead of the impact crusher, its balance needs to be calibrated during installation, otherwise, the vibration force of the machine will be relatively large during operation, which may be dangerous.

The working performance of the glass compound crusher is less affected by the moisture of the material. The finished product is cubic and has large bulk density and small iron pollution, which will improve the recycling value of glass wastes.

The glass composite crusher is designed with a vertical structure, so the material may not be repeatedly crushed at a fast-passing speed, and a good crushing effect cannot be guaranteed for glass pieces.

The working mode of the crusher and the daily maintenance can respectively control and influence the crushing performance. Each type of crusher has different parameters such as crushing principle, feeding and output size.

If you have any requirements about glass crusher, please consult Fote Heavy Machinery and we will provide you with the detailed parameters and quotation of the above glass crusher online for free. If you have special material or output requirements, we can also customize the equipment parameter plan for you to offer the most suitable glass crusher. At the same time, Fote Heavy Industry provides you with free test service. Welcome to visit the factory, and Fote looks forward to cooperating with you.

As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.

Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.

hammer crusher features,technical,application, crusher manufacturer sbm sale hammer crusher machine

hammer crusher features,technical,application, crusher manufacturer sbm sale hammer crusher machine

Hammer crusher is mainly suitable for crushing various soft and medium-hard ore, whose compression strength is not higher than 320MPa, such as coal, salt, chalk, gypsum, blocks, limestone, glasses, and phosphate, etc.

SBM quarry equipments includes primary crushing machines such as PE series jaw crusher, secondary crushing machines such as impact crusher, fine crushing equipments such as cone crushers and sand making machines such as vsi crusher. Our machines contain not only these stationary crushers . But also portable crushing station. For example crawler type mobile crusher and portable crushing plant.

hammer crusher | hxjq

hammer crusher | hxjq

Processing Materials: silica, iron ore, granite, gangue, river pebbles, calcite, limestone, bluestone, coal, gypsum, glass, cement, bricks, tiles, and some mental ores.

Hammer crusher is also called hammer mill crusher or industrial hammer mill, which can be used in the dry or wet crushing processes. It can crush materials into the required size in one time to save lots of energy and investment costs.

According to different features of different materials, HXJQ has improved the hammer crusher in its structure, application and function, and developed coal hammer crusher, glass hammer crusher, ceramic hammer crusher, cement hammer crusher, gypsum hammer crusher, limestone hammer crusher, quartz hammer crusher, etc.

1. Reversible type hammer crusher is often used for fine crushing process, and the finished products are uniform and fine. Reversible type hammer crusher has a large crushing ratio and can work stably.

2. Irreversible type hammer crusher is usually used for medium crushing process. Because its rotors can't rotate back and forth, it is also called as the impact hammer crusher. Irreversible type hammer crusher combines the advantages of hammer crusher and impact crusher and performs well in the crushing process. It is a technical and compact crushing machine with the features of low energy consumption, high capacity and low price.

Hammer crusher is used to crush materials with medium hardness and low corrosivity. The compressive strength of materials processed should be no more than 200Mpa, and water content should be lower than 15%.

Hammer crushing equipment is suitable for processing coal, gypsum, brick, tile, limestone, quartz, iron ore, granite, basalt, gangue, river pebble, calcite, wollastonite, bluestone, glass, cement, and other metal ores. Also, it is used to crush wood, paper, construction waste and recycled asbestos fiber, etc.

Besides, the hammer crushing machine can be not only applied in the crushing process and sand making process, but also can be adopted as the secondary crushing equipment to replace cone crusher and impact crusher, and used in the beneficiation processing line.

Hammer is made of high-quality manganese steels and treated by strict heat processing and then it becomes single austenite. After the process, the service life has been prolonged 4 times than traditional hammer crushing machines and working efficiency has been improved more than 30%.

The crushing process of hammer crushing machine is that the power drives the hammer to crush materials, and the crushed materials are impacted on the counterattack plate, and then the materials rebounded by the counterattack plate hit the materials impacted by the hammerhead.

Hammer crusher mainly relies on the impact force to complete the crushing. When the hammer crusher works, the motor drives the rotor in high-speed rotation. The materials are sent into the crusher chamber evenly and after a high-speed impact of hammer, the material is crushed into a smaller size.

The material larger than the sieve mesh is remained in the screening plate for further impacting and grinding. The material smaller than the sieve mesh is discharged from the hammer crushing machine to the material piles.

HXJQ as one of the professional hammer crusher manufacturers in China, mainly produces jaw crusher, cone crusher, hammer crusher, impact crusher, sand making machine, vibrating screen, feeding machine, sand washing machine and supporting equipment such as dust collector and conveyors, etc.

HXJQ undertakes various construction projects of large-capacity sand and aggregate production lines and serves from the equipment design, manufacturing, project survey, production line design, construction, equipment installation and debugging to after-sales service.

impact crusher vs hammer crusher [7 pics & 10 tips] | m&c

impact crusher vs hammer crusher [7 pics & 10 tips] | m&c

Impact crusher and hammer crusher both use impact principle to crush materials, and the finished material has excellent particle shape. From the appearance, impact crusher and hammer crusher are similar, but they are different in many aspects, so which is better?

Hammer crusher is divided into single rotor and double rotor. The main body is composed of box, rotor, hammer head, impact lining plate, sieve plate, etc. it can directly crush the material with the maximum particle size of 600-1800 mm to 25mm or below.

In contrast, the crushing chamber of hammer crusher is smaller, the impact effect cannot be fully exerted, and the impact crusher is of multi chamber crushing structure, so the crushing is more sufficient.

The plate hammer and rotor of the impact crusher are rigidly connected. The inertia of the whole rotor is used to impact the material (free crushing, impact crushing, milling crushing), so that materials can not only be crushed but also obtain a larger speed and kinetic energy. The plate hammer is used to smash the input material from the bottom to up and throw it onto the upper impact plate.

The hammer head of the hammer crusher is used to crush the material (free crushing, impact crushing), and the speed and kinetic energy obtained by the material are limited. The hammer head striking materials along the material falling direction, with small crushing effect.

The wear of impact crusher plate hammer often occurs on the side that facing the materials, and its metal utilization rate can be as high as 45% 48%. When crushing limestone, the plate hammer of impact crusher is not seriously worn, but when crushing granite (with high hardness, it can be broken by cone crusher), the plate hammer needs to be replaced constantly.

The hammer head of hammer crusher is in a suspended state, and the wear occurs at the top, front, back and side. Compared with plate hammer, the hammer head is more seriously worn, the metal utilization rate of hammer head is about 35%, and the rotor may also be worn.

The feeding chute and the counterattack plate of the impact crusher can be equipped with heating device to prevent the material from binding, so the material with large water content can be crushed and the blocking is not easy to occur.

The impact crusher is not easy to block the material. First, it can be equipped with heating device to prevent the material from blocking due to sticking. Second, there is no grate bar at the bottom. The product size is determined by the gap between the impact plate and the plate hammer. Therefore, when handling the material with too much water content, it can avoid blocking the grate bar when crushing the wet material.

Both of them are suitable for crushing medium and hard materials, but the impact crusher is mostly used as the secondary crushing equipment. While the hammer crusher is mostly used in the cement production line, as the limestone raw material crushing equipment, or as the primary crushing equipment in the sand aggregate plant.

The compressive strength of materials suitable for hammer crusher is within 200MPa, such as coal gangue and limestone, while the compressive strength of materials suitable for impact crusher is within 350Mpa, such as gypsum, coal gangue, limestone, river pebble, sandstone, quartzite, etc. the application scope of impact crusher is wider.

In the market, the frame part of the advanced impact crusher is a three-part structure, which only needs to open the shell at the back of the crusher to replace the plate hammer, impact plate, lining plate and other maintenance operations. Moreover, there are few varieties of vulnerable parts, which is convenient for the purchase and management of spare parts.

hammer crusher vs jaw crusher | which is better (7 tips) | m&c

hammer crusher vs jaw crusher | which is better (7 tips) | m&c

Hammer crusher and jaw crusher are common crushing equipment in the mine/building materials industry. They have large feed inlet and high crushing efficiency and are mainly used for coarse crushing of various ore materials. But they are different in many parts, which is better? Table of Contents 1. Different Appearance and Working Principle2. Different for Applicable Materials3. Different Discharging Adjustment Methods4. Different Structure and Wearing Parts5. Different Configuration of Production Line6. Different Application of Aggregate Line7. Which is Better, Hammer Crusher or Jaw Crusher

The appearance and working principle of the 2 crushers are different. The jaw crusher is of the curved dynamic extrusion type, and the materials are crushed in the crushing cavity composed of the moving jaw and the fixed jaw. The hammer crusher is mainly broken by the impact, shear and tear of the rotating hammer head, the mutual impact between materials and the counterattack of the lining plate.

Hammer crusher is mainly used to crush ores with low hardness, and its compressive strength is generally lower than 200Mpa, such as limestone, bluestone, coal gangue, etc. When crushing hard materials, the hammer head is seriously worn and the cost of frequent replacement is high.

The adjustment of the discharging granularity of the hammer crusher is realized by changing the bottom sieve plate. There are three adjustment modes of jaw crusher: base plate adjustment, wedge adjustment and hydraulic cylinder.

Hammer Crusher is rarely used in aggregate production line. Although the process is simple, the yield is low, it is easy to be over crushed, and there are many powdery materials. Moreover, the finished aggregate may have microcracks, low compressive strength, which will affect the quality of aggregate, sales and price. Therefore, it is often used as auxiliary sand making machine.

The main advantage of hammer crusher is that the ore with low hardness can be formed in one time. For the production line with output < 300t/h, a single hammer crusher can replace a jaw crusehr + a impact crusehr.

The main advantages of jaw crusehr are simple structure, convenient maintenance, high wear resistance, high cost performance, suitable for all kinds of hard ores. However, due to the high content of needle and flake aggregates in the discharge, it is necessary to cooperate with impact crusher for shaping.

Related Equipments