high efficiency air flotation cell machine for gold mining equipment

kyf air inflation flotation cell, rougher flotation cell, copper flotation machine - xinhai

kyf air inflation flotation cell, rougher flotation cell, copper flotation machine - xinhai

[Improvement]: Cone impeller is equipped with the vanes sloping backward at a certain angle, which makes strong agitation ability and simple structure. The impeller chamber is equipped with multi holes cyinder air distributor. Adpot the U-shaped tank with little sand sediment.

KYF air inflation floatation cell working principle: when theflotation cellis at work, the rotation of impeller makes the slurry all around via tank bottom absorbed from downside of impelle into inner-vanes of impeller, where low pressure air produced by the blower goes into via hollow shaft and the air distributor of impeller chamber at the same time. After fully mixture of the slurry and air among vanes, they are pushed out in inclined upward direction from upper half of the impeller around, and go into the tank via steady f\ow and orientation by the stator. Air bubbles rise to the foam stability area, and after concentration process, the froths overflow from the overflow weir into the froth tank. Another part of the slurry flows to ward the lower part of impeller, then through the impeller agitation, they are mixed together to form mineral laden bubbles again, and the rest of the slurry will flow to the next tank to become tailings eventually.

flotation, froth flotation, flotation cell, froth flotation separation - xinhai

flotation, froth flotation, flotation cell, froth flotation separation - xinhai

Xinhai is a professional R & D and production manufacturer of flotation cells, and has passed ISO9001:2015 international quality management system certification. Xinhai froth flotation separation is sold all around the world.

High-quality equipment manufacturing capabilities, focusing on the research and development and innovation of mineral processing equipment, extending the stable operation time of the equipment, and providing cost-effective services.

jjf flotation cell, flotation process, wemco flotation cell - xinhai

jjf flotation cell, flotation process, wemco flotation cell - xinhai

[Improvement]: Shallow groove, the stator lower than the impeller, large slurry circulation volume, low energy consumption; the stator is a cylinder with an elliptical hole which is conducive to the dispersion and mixing of pulp and air. Umbrella shaped dispersion cover with hole keeps the pulp surface stable.

When the JJF mechanical agitation flotation machine is working, vortexes are generated in the vertical tube and the draft tube. This vortex forms a negative pressure and sucks the air from the air inlet pipe. It is in the impeller and stator area with the slurry sucked in through the draft tube. mixing. The slurry-gas mixed flow is moved in a tangential direction by the impeller, and then converted into radial movement by the action of the stator, and is evenly distributed in the flotation cell. The mineralized bubbles rise to the froth layer and are scraped out unilaterally or bilaterally to form froth products.

jjf type flotation machine

jjf type flotation machine

Improvement: Shallow groove, the stator lower than the impeller, large slurry circulation volume, low energy consumption; the stator is a cylinder with an elliptical hole which is conducive to the dispersion and mixing of pulp and air. Umbrella shaped dispersion cover with hole keeps the pulp surface stable.

JJF flotation machine(floatation cell) is a new type of flotation equipment advanced in China. It can be widely used in the selection of non-ferrous metals, ferrous metals and non-metallic minerals. It is suitable for rough selection and sweeping of large and medium-sized flotation plants.

Large clearance between impeller and stator, the stator is a cylinder with elliptic hole, and it is good for mixing and dispersing the gas and pulp. The height of stator is lower than the impeller, pulp circulation volume is large, and it can be reached at 2.5 times of others.

When the impeller rotates, eddy current is generated in the vertical cylinder and the draft tube. The eddy current forms a negative pressure, and the air is sucked from the intake pipe and sucked in the impeller and stator regions and through the draft tube. Mix the pulp. The slurry gas mixing flow is moved by the impeller in a tangential direction, and then converted into a radial motion by the action of the stator, and uniformly distributed in the flotation tank. The mineralized bubbles rise to the foam layer, and the unilateral or bilateral scraping is the foam product.

Related Equipments