high end portable calcite agitation tank sell in lyon

agitators - tacmina corporation - pdf catalogs | technical documentation | brochure

agitators - tacmina corporation - pdf catalogs | technical documentation | brochure

TACMINA Agitators for All Agitation and Mixing Needs Manufacturing processes not only in the food and chemical industries but also in all sectors of industry are diversifying. Agitators are now required to immediately meet varying on-site conditions. TACMINA's range of agitators has been further enhanced to cover agitation of liquids, slurry, kneaders, static mixers, and other related equipment. Select the ideal model to suit your on-side requirements as if you are ordering a custom-made machine Fat industry Heating, mixing, extraction, reaction, storage, etc. Rubber industry Suspension...

Select from three types - vertical, portable, horizontal - to suit pre- and post-manufacturing processes and itators agitators is a long service life and little fixed at the top part of tanks, and their shafts are inserted vertically for use. Two features of these vibration. For medium speeds For medium/low speeds (gear reducer type) (geared motor reducer type) \_ For medium/low speeds (cycloid reducer type) C1T (for processes) For medium/low speeds (cycloid reducer type) C2T (for water treatment and general use) For medium speeds (belt reducer type) BT Variable Speed Model (custom order)...

When selecting the type of agitator and motor drive, it is important that you fully understand specifications and operating conditions. Your dealer will select the ideal agitator model matched to your particular requirements for you. Check each of the following items, fill in the table on the rear of this catalog, and inform your dealer of this information. Agitation Force Check your particular agitation requirements and physical conditions of the liquid you are going to agitate before checking the agitation force. Motor Drive Confirm that the motor drive matches the volume of liquid....

Impeller Selection of the optimum impeller shape is vital. (Your dealer will select the impeller matched to your specifications.) Vane shape Disk turbine 2-vane paddle Anchor spiral ribbon Standard Specifications3-vane propeller Paddles This axial flow propeller is the most widely used to obtain a large circulation volume. 4-45 paddle This paddle produces a high agitation effect flow by the combined action of radial flow and axial flow. It is ideal for agitation of large volumes of comparatively high-viscosity liquids, (500 to 20000mpA^s) liquids at slow speeds, and is used at rotation...

Vertical type Mounting procedure for vertical agitators In this example, the agitator is mounted eccentrically in the tank to obtain vertical convection and turbulence in the direction of axial flow. In this example, the agitator is mounted at the center of the tank, and baffle plates are attached on the inner wall of the tank to create vertical convection and turbulence. For medium speeds (gear reducer type) As this vertical agitator is a highprecision gear unit, it emits little sound during operation, is compact, and demonstrates high performance. For medium/low speeds (geared motor...

0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter and Specification Dimensions propeller diameter dimensions increase by one more rank. External Dimensions The 2-stage, 3-vane propeller is optional. Idling is prohibited. The standard paint color is Munsell 10GY-6/6. The standard liquid-end materials are SUS304 and SUS316. Linings are also available in various materials. The standard motor is a 4-pole, totally enclosed fan-cooled outdoor type. Sealed type (BTP) is also available. For details,contact your TACMINA representative. * Up to 0.75 kW, 1 stage,...

Mounting procedure for portable agitators For medium speeds (gear reducer type) As this portable agitator is a high-precision gear unit, it emits little sound during operation, is compact, and demonstrates high performance. This handy multi-type model can also be used as a vertical type (GT model) if the clamp is removed and a flange is attached. The agitator is clamped to the support base or top edge of the tank. Though the shaft is mounted at an angle with respect to the horizontal and vertical directions, it should be fixed so that its vanes do not exceed beyond the center of the tank....

External Dimensions When outdoor cover is attached Specification Dimensions Model Motor Revolution Output Voltage Speed (min-1) V kW Hz Hz 0.4 kW or more for 6-pole motor (customer order). Also, body, shaft diameter and propeller diameter specifications increase by one more rank. Agitation Shaft 3-vane propeller Standard Dia. 1st stage 2nd stage dia dia. length (L) (Dia. D) (A) Part Dimensions Max. Agitation Capacity Approx. Weight Diluted Medium W/ motor Viscosity Liquid kg L mm mm mm mm - GS - 0.065A . ...

Chemical dissolving tank with metering pump and base for agitator Solution Tank Features In addition to standalone use, this tank can be used in various combinations for various applications: with a metering pump, with an agitator, or with a metering pump and agitator. An extensive range of range sizes are available: 50, 100, 200, 300, 500 and 1000 liters. Agitator for Solution Tank CS Features Compact. Ideal for small volumes Combining with Solution Tank fully demonstrates performance. Specification Dimensions Model Idling is prohibited. The standard paint color is Munsell 10GY-6/6. ...

Noritake Static Mixers with No Driven Parts For reduced maintenance and energy and space savings in mixing processes Sanitary Finishing Type N30 Series This sanitary type conforms to the same standards for sanitary piping used in food processing plants and supports CIP cleaning. The main unit and element can be easily removed and attached, making it ideal for processes that require disassembly for cleaning. Notify us of the following when inquiring about TACMINA agitators. Specifications N10 Series N60 Series Both ends of the element are welded to the housing, with six elements provided for...

effect of aeration and agitation regimes on lipase production by newly isolated rhodotorula mucilaginosa mtcc 8737 in stirred tank reactor using molasses as sole production medium | springerlink

effect of aeration and agitation regimes on lipase production by newly isolated rhodotorula mucilaginosa mtcc 8737 in stirred tank reactor using molasses as sole production medium | springerlink

The influence of media and process parameters (aeration and agitation) on fermentation broth rheology and biomass formation has been studied in 1.5-l stirred tank reactor for lipase production using Rhodotorula mucilaginosa MTCC 8737. Molasses, as sole production medium, is used for lipase production by varying aeration (1, 2, and 3vvm) and agitation speeds (100, 200, and 300rpm). Maximum lipase activity of 72U/ml was obtained during 96h of fermentation at 2vvm, 200rpm, pH7, and 252C temperature. Lipase production kinetics with respect to dry cell weight of biomass showed Y P/S of 25.71U/mg, specific product formation of 10.9U/mg DC, and Y X/S 2.35mg/mg. Maximum lipase activity (MC 2) of 56U/ml was observed at 1% molasses, and a further increase in the molasses concentration of (%) 1.5 and 2 inhibited the product formation of lipase with 15 and 8.5U/ml, respectively. The production kinetics of molasses media showed Y P/X was 14U/mg DC, Y P/S 16U/mg, and Y X/S 1.14mg/mg during 96h of bioreactor operation. The kLa values for all batches (MC 1MC 4) at 96h of fermentation were 32, 28, 21, and 19/h, and the |oxygen transfer rate were 54.4, 56, 35.7, and 17.29mg/l h, respectively. Increase in molasses concentration resulted in decreased lipase activity by increase in viscosity of the fermentation broth.

Potumarthi, R., Subhakar, C., Vanajakshi, J. et al. Effect of Aeration and Agitation Regimes on Lipase Production by Newly Isolated Rhodotorula mucilaginosaMTCC 8737 in Stirred Tank Reactor Using Molasses as Sole Production Medium. Appl Biochem Biotechnol 151, 700710 (2008). https://doi.org/10.1007/s12010-008-8293-1

tank with agitator - all industrial manufacturers - videos

tank with agitator - all industrial manufacturers - videos

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

Flexible tank with aerated treatment The Merou-Viti is a closed self-supporting flexible tank that uses an innovative process, registered by Labaronne-Citaf, recognized since 2001 by water agencies ...

Our ST series pressure tanks now features an additional 25L reservoir. This 25L tank follows the same safe and compact design to reduce foot print on production lines and bench tops. Our industry ...

UK pressure feed systems firm is launching its new range of clear tanks Pressure feed systems producer SR-TEK is launching its new range of clear tanks This new range specifically offers: 4 different ...

The series of equipment have the functions of heating, cooling, heat preservation and mixing preparation. The vessel carries out design and processing according to "Technical condition for steel made pressure vessel". The ...

... cooling groups can be mounted on tank or condenser parts can be mounted at outside.Tanks are manufactured in 500-20.000 liters capacity range. Optionally, washing and weighing groups can be mounted on ...

Slurry tanker with the mixer to fertilizers The slurry tanker with the mixer to fertilizers Type T546 Capacity 10000 literson the suspension type TANDEM or two sprung axles The slurry tank ...

... type, the containers can also be used to feed more than one spray gun. The wide selection of containers offers the optimum tank for any kind of operation. Krautzberger material pressure feeding containers are available ...

The tanks of the ST MIX 1000 series are equipped with a special agitator which ensures quick and even mixing of cocoa mass, chocolate and cream, fluid with fluid and with the addition of solid inclusions ...

Agitating Tank Processing ability: 0.2630 m Rotate speed: 200530 r/min Applied material: ore slurry, etc Agitating Tank rotates by the V-belt driving the impeller, making medicine and mash ...

... making it possible to accumulate different types of brine in each tank for different applications. System Cylindrical accumulation tank with cover and support for optional BRINSTIR agitator ...

The vats are in stainless steel of 150 to 3000 litres for the stocking and conservation at +4C of ice- cream mix. The refrigeration is carried out by means of water circulation at +2C produced by a special ice water vat. The ice water ...

... and constant circulation of steam inside them, to have at the end a perfect cooking of the curd inside cheese vat. The curd mixer and breakage unit is built entirely in AISI 304 stainless steel. An electrical servo control ...

Related Equipments