industrial dryer burner

economy industrial | rotary dryers

economy industrial | rotary dryers

The Economy Industrial rotary drying system is designed to extract process water from the final product and prepare the product for storage or shipping. There are four basic sections to the complete rotary drying system: An induced draft (ID) Fan The Rotary dryer A Trommel screen to classify material A Burner to dry the product

The ID fan pulls a draft of heated air through the rotary dryer. The size of the fan is dependent on the size of the dryer with a typical capacity of about 50,000 cfm of air movement. The speed of the fan motor is variable to fine tune the air flow. Typical horsepower on the fan is 40-75 hp. The heated air and moisture are then ducted outside of the building. The rotary dryer consists of a long rotating tube with several lifting bars installed inside. As product flows into the rotary dryer the lifting bars raise the product and drop it through heated air to facilitate drying. The resident time of product in the dryer may be varied through a variable speed control that controls the speed of the motor that drives the gear reducer controlling the rotating speed of the dryer. Speed may be varied from 1-35 rpm. The trommel screen is attached to the end of the rotary dryer. It is a tube the same diameter as the dryer with a series of openings of varying sizes to classify the product. The Trommel Screen rotates along with the dryer. Oversized items are screened out of the final product. The burner is located at the opposite end of the dryer system. The Burner provides the heat for the induced draft to dry the product. Economy Industrial uses only Honeywell / Maxon burners, controls and gas trains. The Maxon Ovenpak integral burner and blower is used with sizes from 3-10 mbtu. The controller allows for the burner to be controlled locally or remotely through a programmable logic controller (PLC).

The rotary dryer consists of a long rotating tube with several lifting bars installed inside. As product flows into the rotary dryer the lifting bars raise the product and drop it through heated air to facilitate drying. The resident time of product in the dryer may be varied through a variable speed control that controls the speed of the motor that drives the gear reducer controlling the rotating speed of the dryer. Speed may be varied from 1-35 rpm.

The trommel screen is attached to the end of the rotary dryer. It is a tube the same diameter as the dryer with a series of openings of varying sizes to classify the product. The Trommel Screen rotates along with the dryer. Oversized items are screened out of the final product. The burner is located at the opposite end of the dryer system. The Burner provides the heat for the induced draft to dry the product. Economy Industrial uses only Honeywell / Maxon burners, controls and gas trains. The Maxon Ovenpak integral burner and blower is used with sizes from 3-10 mbtu. The controller allows for the burner to be controlled locally or remotely through a programmable logic controller (PLC).

The burner is located at the opposite end of the dryer system. The Burner provides the heat for the induced draft to dry the product. Economy Industrial uses only Honeywell / Maxon burners, controls and gas trains. The Maxon Ovenpak integral burner and blower is used with sizes from 3-10 mbtu. The controller allows for the burner to be controlled locally or remotely through a programmable logic controller (PLC).

The burner is located at the opposite end of the dryer system. The Burner provides the heat for the induced draft to dry the product. Economy Industrial uses only Honeywell / Maxon burners, controls and gas trains. The Maxon Ovenpak integral burner and blower is used with sizes from 3-10 mbtu. The controller allows for the burner to be controlled locally or remotely through a programmable logic controller (PLC).

industrial dryer - tunnel dryer manufacturer from hosur

industrial dryer - tunnel dryer manufacturer from hosur

As a renowned organization, we are engaged in offering a wide range of Tunnel Dryer to meet the demands of our clients. These products are hardened and quenched and ensure long lasting service life. Our products are dimensionally accurate and are compact in design. We are offering these Tunnel Dryers at industry-leading rates.

We are considered as a renowned firm that offers a wide range of Shuttle Dryer to our customers. Our range is highly durable and offers long term service. Designed and developed with best grade material, our range is well equipped and offers reliable performance. Apart from this, our range is offered at economical rates.

combustion & airflow | industrial kiln & dryer

combustion & airflow | industrial kiln & dryer

Industrial Kiln & Dryers burner/controls inspection is an all-encompassing examination of the condition of your dryers burner/control system. We recommend a yearly inspection for safety interlock, regulatory requirements, and insurance requirements (NFPA Compliance). Regular inspections ensure all process control measures are functioning correctly and your burner/control system is consuming fuel as efficiently as possible. If you have never had your burner/control system inspected, Industrial Kiln & Dryer can assist in establishing maintenance and performance trends for future examinations.

Related Equipments