info on electric destemmer grape machines

crusher-destemmer, electric, painted

crusher-destemmer, electric, painted

For over 40 years, the Marchetti family has been passionately engaged in manufacturing wine-making machines for private or semi-professional use, restoring life to an old and fascinating trade like grape processing and wine making. The machines Grifo are able to provide to the market today are the product of a constant process of quality and technological growth, always careful to cater to the requirements of a fast-evolving sector.

Grifo grape crushers and stalk removers have a simple and modern design. They provide utmost reliability thanks to the high quality of the materials and technologies used to make them. The grapes are soft crushed by means of two nylon rollers and subsequently the grapes are separated from the stalk by means of the stalk-removing shaft and removable stainless-steel grille. They are available in manual as well.

electric grape crusher destemmer

electric grape crusher destemmer

The grape destemming and crushing machine is an important processing machine in the wine processing industry and the supporting equipment for the homemade wine-making workshop. This grape crushing machine mainly can remove the grape stems and crush the grape for the next winemaking process. This grape crusher can be matched with the hoist conveyor and the juicer machine in the grape wine processing line when using.

This equipment is a piece of special equipment for small wineries to process fresh grapes. It can be used for the separation of fruit stems, removal of stems and crushing, etc. It is ideal pre-treat processing equipment for small wineries. The machine has a high removal rate and can quickly remove grape stems. It has a very compact structure and easy to install and move.

This grape stem removing and crushing machine is equipped with a hand-wheel for the step-less speed control device, which can adjust the speed of the machine according to the grape variety. In addition, the crushing roller gap of the machine can be adjusted, and the adaptability to grape varieties is stronger. The grape contacting part and the exposed part of the whole machine are made of stainless steel, which meets the standards of food-grade enterprises.

This automatic grape crusher machine is composed of the stainless steel bracket and outer casing, one upper feed port and two lower discharge ports, screw shaft with cutter, speed control motor, etc. The crushing device of the machine is located at the lower end of the feed port and consists of two crushing rolls. The gap between the two rolls can be adjusted freely between 5-15mm, which can be determined according to the grape variety.

The grape de-stalking device of the machine consists of a stem removal shaft and a stem removal semi-screen. The stems are arranged in a spiral shape on the stem shaft. The semi-sifting sieve is formed by punching a stainless steel plate, and the main function is to separate the fruit and the stem, and the stem is discharged out of the machine. The drive system of the de-stalking device is located at the front end of the frame and is driven by a step-less speed-regulating motor through a sprocket chain.

The grapes are transported directly from the feed hopper to the crushing system. The stem shaft in the crushing system will continue to rotate. In addition to the leaves on the stem shaft, the fruit pieces can be separated from the stems. The stem is spirally mounted on the main shaft, and the stem is discharged from the machine by the end of the semi-screen.

The grapepieces after the stem are dropped from the round holes in the semi-sieve into the receiving trayand transported to the next process. The user can configure one screw pump according to his actual situation, and the fruit and slurry after the stem removal can be transported to the next process by the screw pump.

The whole bunch of grapes enters the conveying screw from the feed port and is conveyed to the sieve cylinder. When the sieve tube rotates, the mace device in the tube will break up the grapes and the stems. Then, the grapes are transported through the sieve holes(15-20mm) to the outlet and crushed by crushing rollers. The stem is discharged. The crushed grapes are transported to the next step by the screw pump.

The grape crusher destemmer will be a good choice for removing the grape stems and crush the grape for making grape wine. The whole process is clean and efficient, and this machine has big processing capacity.

To make grape wine, we should do pretreat of the grape first. Such as crushing and removing the grape stems. Then we can use the screw pump to suck the grape and grape juice into the screw juicer machine for making grape juice.

Taizy food processing machinery can provide you the whole set of grape processing machines with good quality, such as grape crushing, grape destemming, grape juicing and so on.

Zhengzhou Taizy Machinery Co., LTD. is the leading food processing machinery manufacturer and supplier of China, which is adhering to the principle ofQuality First, Customer First and aims to provide good business opportunities to our customers. We sincerely welcome you to consult us and visit our food machine factory and look forward to having perfect cooperation with you.

Related Equipments