kampala jaw crushers prices

small jaw crusher price analysis - the reason for the hot market | fote machinery

small jaw crusher price analysis - the reason for the hot market | fote machinery

The jaw crusher is a primary rock crushing equipment. In recent years, the market for small or mini jaw crushers has been hot, and the orders received by our company have continued to increase, which is larger than before.

Small jaw crusher jaws are adjustable down to about half an inch, and up to about two and a half to three inches discharge. The final products can be directly put into application without further crushing by other crushers.

In the process of continuous improvement, various types of small jaw crusher machines have appeared on the market, such as the small a PE jaw crusher, a small portable rock crusher, a small mobile stone crusher and a small hydraulic jaw crusher.

The price of the above jaw crusher is the market price and is for reference only. Generally speaking, the price of jaw crusher is a hundred dollar and thousands of dollars, but due to various factors, the price of the small jaw crusher will also fluctuate. Then what are the factors affecting the price?

Quality is a key factor in determining a piece of equipment, which is mainly related to the choice of the manufacturer. Different manufacturers'production processes and manufacturing materials are different, which directly leads to different input costs of equipment, so the price is naturally very various.

We all know that there are two main types of suppliers, one is a direct-supply manufacturer that combines production and sales; the other is an indirect supplier that sells and earns a speculative profit.

As a result, it is conceivable that the former has a price concession because it can provide the factory price, and the latter tends to increase the price on the basis of the ex-factory price in order to obtain more profits.

Fote Heavy Machinery has been engaged in the production of jaw crushers for nearly 40 years. After numerous technical upgrades and renovations, it has fully equipped to produce technologically advanced and exquisite equipment.

Fote has always adopted the idea of small profits but quick turnover, low-profit sales model, the price of each equipment is much lower than the market, make every effort to reduce costs and reduce profits.

If you don't know which model to choose at this time, you can submit the basic conditions of the materials and the requirements for production and grain size. Then technical manager of Fote will provide you with tailor-made production processes with ideal efficiency and low cost.

As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.

Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.

jaw crushers for sale

jaw crushers for sale

The jaw crushers we offer for sale include Superior, Type B Blake, Fine-Reduction, and Dodge sizes, 4 by 6 to 84 by 66 inches. A reciprocating machine, the crushes material in a straight line between jaws without grinding or rubbing surfaces.

As you compare this jaw crusher feature for feature with other makes youll see how this modern crusher lowers principal costspower consumption; lubrication; jaw plate, toggle plate, and bearing wear youll understand why we say the crusher promises you a new low cost per ton of material crushed!

Firstthose who have rock or ore tougher and more abrasive than most material. Secondthe operators whove had difficulty with other designs of crushers. And finallythe operators who naturally buy the bestexpecting their added investment to be written off in comparatively short time through lower operating and maintenance costs!

Compare the dimensions with those of conventional jaw crushers. It measures up to 20% longer; has up to 35% deeper crushing chamber! And while you naturally expect to pay more for this bigger,deluxe crusher, it follows that you get more too! For example:

You get a crushing chamber with a full-width receiving opening increased capacity! You get an acute crushing chamber that minimizes slippage very important with hard, tough materials. You cut down crushing power required through longer pitman and front toggle. You reduce packing, get closer setting through the longer jaw, non-choking plates. You lower maintenance cost, get longer jaw plate, toggle, and bearing life through lower structural stresses, simplified design.

Frames of these crushers are built for maximum rigidity designed to prevent distortion during operation. Side members are heavy steel plate, reinforced by steel ribbing. End members are cast steel, of box section design, to provide maximum strength.

The side frames are deep-welded and then stress-relieved in thehuge annealing furnaces to eliminate possible failure adjacent to welds. The result is a uniformly strong frame that will remain true during the long service life of the crusher.

A jaw crusher frames are of sectionalized construction to facilitate handling. This design minimizes heavy lifts makes the crusher suitable for installations where parts must be passed down a shaft or through a tunnel. End members are attached between side members with vertical tongue and groove joints and held together with fitted bolts. Long-bearing surfaces prevent angular distortion.

Important differences in design show up visually when a cross-section of the crushing chamber of a conventional crusher is superimposed over that of the crusher. Now you can see the advantages of the 1 /3 deeper chamber using non-choking jaw plates. Its more acute crushing angle is carried to the very top of the chamberpermits nipping the largest material that can enter the receiving opening!

Lower plates on the swing and stationary jaws are suspended from projections on jaws. These plates also support the upper plates. This exclusive feature permits the free expansion of manganese steel jaw plates greatly minimizes the possibility of buckling or warping prevents costly shutdowns!

SWING AND STATIONARY JAWS on the jaw crusher are annealed cast steel box section construction designed for maximum rigidity. The jaw swings on a sturdy shaft that is clamped to the crusher frame. This shaft also serves as a reinforcing tie across the top of the frame. The entire design facilitates lubrication and replacement of shaft bearings.

Jaw plates are constructed of manganese steel and have corrugated crushing surfaces which reduce the power required for fracturing material. The jaw plates are built into two pieces to jaw. Those on the swing jaw are interchangeable. Plates on the stationary jaw are the non-choking type, not interchangeable. Lower plates on both jaws are suspended from jaw projections and support upper plates. The main advantage of this construction (see above) is to permit the free flow of manganese steel. All four plates are held in place by large through-bolts equipped with springs to prevent bolt breakage.

Heres still another feature youll find on the jaw crusher! Renewable wearing plates between the cast manganese steel jaw plates and swing and stationary jaws provide a firm backing for the jaw plates. If, for any reason, looseness develops in the jaw plates, these wearing plates, not the jaws, take the wear! By protecting expensive jaw castings, these wearing plates increase crusher life simplify maintenance minimize causes for shutdowns.

The heavy, two-piece corrugated manganese steel jaw plate is designed to fracture the toughest kinds of rock or ore with a minimum of power. The unobstructed clearances above, between, and below the plate sections permit free flow of manganese steel.

This construction eliminates the need for extra holding pieces, greatly minimizes the shearing of bolts. The amply designed shaft not only supports the swing jaw but reinforces the frame, serving as a tie between sides.

Notice the extra length of this jaw as compared to conventional types. Designed up to one-third longer, it exerts greater pressures in the upper portion of the crushing chamber, distributes crushing action more evenly. The result is a gradual reduction of ore to the choking point, and increased capacity!

Another, southern iron ore mining company, chose this 48 by 42-inch crusher to replace a conventional design that had failed. They explained, In our process, weve got to have a ruggedly designed crusher capable of continuous operation!

CRUSHERSin sizes from 36 by 25 to 60 by 48 inchesare giving these and other operators more for their money more capacity; more crusher life; more satisfaction! It can pay you too, to know more about this great crusher! Why not call in your use today!

All sizes of crushers feature a three-piece toggle plate construction. Worn ends may be replaced no need to discard the entire toggle. Bronze toggle ends fit into replaceable hardened steel toggle seats in swing jaw. Properly lubricated, this assembly materially reduces maintenance.

Toggle plates for these jaw crushers are of three-piece construction, consisting of an iron center section (2) to which are bolted two replaceable bronze ends (1 and 3). Toggle seats are carefully machined and equipped with protecting shields that deflect dust and dirt.

A toggle block, arranged for both vertical and horizontal adjustment, is provided at the rear of the frame. By inserting shims above the toggle block, the crushing stroke can be adjusted. Insertion of shims behind the toggle block adjusts the size of the discharge opening. Parallel alignment is assured and unnecessary strain in the crushing machine is avoided.

The pitman in any jaw crusher is essentially a tension member. However, because it also has a vertical reciprocating movement, it is desirable to keep its weight as low as possible, consistent with maintaining the required strength.

In the crusher this is accomplished by designing the pitman as a skeleton member, first to provide the necessary strength for tension and with stiffness against overturning thrust provided for by deep integral webs.

The pitman is designed with only four large-cap bolts, and the pitman cap is ribbed for proper distribution of the load to these bolts. The pitman is swung on the eccentric shaft which is supported by removable, water-cooled bearings on the frame.

The pitman is a two-piece annealed cast steel construction, with a cap designed for water cooling. Bearing surfaces on both pitman and cap are babbitted and are joined together by four large forged steel bolts. The elimination of excess bolts inherently found in conventional design results in a more uniform distribution of load.

The pitman (eccentric) shaft is heat-treated, forged steel constructionof ample diameter so that stress, even under the shock of suddenly clogged jaws, is low. The shaft is carried in removable, water-cooled, babbitted bearings designed to permit quick removal or replacement without having to strip the crusher.

Heres a typical toggle plate for jaw crushers. It is constructed in three pieceswith the center section of iron, two ends of bronze, designed for quick bolting to the center section. This unique construction materially reduces replacement and maintenance costs makes it unnecessary to discard toggles when ends alone are worn!

A critical point in the operation of large jaw crushers is the arrangement of the swing jaw and its supporting shaft. While in most crushers the jaw is pressed on the shaft and the latter swings in frame, in the jaw crusher the opposite principle is usedshaft is clamped in frame and jaw swings on the shaft!

Another point has been lubrication. In operation, the actual movement of the swing jaw is relatively small. The result is difficulty in proper lubrication of bearing surfaces. The crusher uses a special means of lubrication and in addition is designed with the new replaceable, graphite-impregnated Scor-proof bushings which greatly reduce wear on the expensive shaftssince these bushings, and not the shaft, now take the wear!

Very careful attention is required in the lubrication of heavy mechanical units like the jaw crusher. A thorough study made of existing types of lubrication systems resulted in the selection of a pair of systems that assure positive delivery of lubricant to point of maximum pressure.

The 48 by 42-inch jaw crusher and smaller sizes are force-fed by an automatic high-pressure lubricator to the swing jaw, pitman, and main bearings as illustrated in Figure 1. A motor-driven pump forces the lubricant through pressure buildup cylinders and out to distributors which dispense a precise amount to each of the points on the bearings. No oil return is provided.

The 60 by 48-inch jaw crusher and larger sizes are lubricated by a closed circuit oiling system to the pitman and main bearings, as illustrated by the solid lines in Figure 2, and by high-pressure lubrication fittings connected to the swing jaw bearings, as illustrated by the dotted lines in Figure 2. A motor-driven gear pump forces the oil through pressure-type filters and a condenser-type cooler to a distribution manifold mounted on the crusher. The oil flows through the bearings, lubricating and cooling, and back to the reservoir for recirculation. The swing jaw bearings require servicing by portable grease equipment.

The capacity of the jaw crusher is greater than that of conventional jaw crushers. One reason is its uniform-wear crushing chamber with full-width receiving opening. Another reasonits a more acute crushing angle.

Slippage is reduced packing and choking are prevented by a more even distribution of crushing action throughout the entire length of the crushing chamber. The result is a gradual reduction of material to the choking point increased capacity!

Capacities given below are approximate and are based on standard speeds, jaw motions, and jaw plates, with a feed of quarry or mine run material weighing 100 lb per cu ft crushed. Most stone and low-grade ores are considered weighing 100 lb per cu ft crushed.

The table is based on continuous feeding. Reserve for normal interruption of feeding should be provided. A heavy-duty apron feeder is recommended for most installations, particularly where large cars or trucks are used in the quarry or mine.

When feed to crushers is scalped over grizzlies or screens the number of rejections, or material that will have to be crushed should be determined in establishing the tonnage to be handled by the crusher. The number of fines received from mine or quarry will vary widely depending on each application and should be taken into consideration in determining the overall capacity.

Whatever equipment you operate, you can be certain of careful, considerate handling of orders for repair or replacement parts. In most cases parts are shipped directly from stockyoure assured of fast delivery. The view at left shows a small portion of crushing, cement, and mining equipment parts normally carries.

Repair parts temporarily depleted or not carried in stock will be furnished in time to meet requirements whenever possible. Anticipation of future needs, placing orders in advance, will greatly aid in avoiding unforeseen delays. Genuine parts are exact duplicates or improvements of original components of your machinery, not makeshift substitutes.

used jaw crushers for sale. metso equipment & more | machinio

used jaw crushers for sale. metso equipment & more | machinio

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

China Stone Cruser Equipment pe200 350 pe 250x400 Lab Jaw crusher for sale This small size PE series jaw crusher max. feeding size is 130-210mm, output size is 10-60mm, capacity is 1-20 tph. Mining crusher crushi...

Small Portable gold crusher hot sale in Australia This small size PE series jaw crusher max. feeding size is 130-210mm, output size is 10-60mm, capacity is 1-20 tph. Mining crusher crushing materials including gr...

This small size PE series jaw crusher max. feeding size is 130-210mm, output size is 10-60mm, capacity is 1-20 tph. Mining crusher crushing materials including granite, basalt, limestone, river stone, sandstone, ...

used mobile stone crusher for sale stone crusher hammer Product Description used mobile stone crusher for sale stone crusher hammer is mainly used for the processing of materials such as metallurgy, chemical indu...

Stone crusher plant layout diesel mobile stone crusher Product Description Stone crusher plant layout diesel mobile stone crusher is mainly used for the processing of materials such as metallurgy, chemical indust...

Mobile crushing plant for sale in russia with cone Product Description Mobile crushing plant for sale in russia with cone is mainly used for the processing of materials such as metallurgy, chemical industry, buil...

1.We are factory and be able to give you the lowest price than market one; 2.Our products have been exported to over 80 countries and widely used in global mining and construction industry; 3.we have a prof...

500x750 stone crushing machine, large capacity limestone granite gravle gold rock jaw crusher The Stone Crushing Plant mainly consists of Vibrating Feeder, Jaw Crusher, Cone Crusher or Impact Crusher, Vibrating S...

Related Equipments