low budget electronic garbage crusher from andhra pradesh manufacturer

made using 100% waste, these bricks cost rs 10 & are 250% stronger!

made using 100% waste, these bricks cost rs 10 & are 250% stronger!

India is the second-largest brick manufacturer in the world, with the Indo-Gangetic plains producing more than 65 per cent of the total production in the country. But, did you know that brick kilns are also major contributors to environmental pollution?

Gujarat-based entrepreneur Manish Kothari came up with an ingenious solution to this pertinent problem. The owner and managing director of Rhino Machines, a project consultancy firm, presents Rhino bricks, made from foundry dust and waste plastic!

There is no use of water in the making of these bricks. Also, more water is saved during the construction process, as the walls built with these bricks do not need to be cured with water, explains 52-year-old Manish.

Rhino Machines manufactures these bricks and paver blocks (made from the same mixture of plastic and foundry dust) in collaboration with R+D Labs (an offshoot of R+D Studio, an architectural firm) that helps them with research and development. Launched in February 2020, they have already received orders of over 1,000 bricks and 650 paver blocks. They have also received inquiries from Chile, Colombia, and China.

Rhino Machines was founded in 1984 by Manishs father as a project consultant engineering firm. Later, Manish graduated as a Mechanical Engineer and registered the firm as a company in 1996. They have been catering to the technological needs of the foundry industry for years.

The foundry industry in India is the second-largest in the world after China. India produces almost 10-12 million castings every year. For every tonne of casting that the industry makes, about 800 kg of sand is used, explains Manish.

At Rhino Machines, we provide the technology to break down large sand moulds. Moreover, we also set up plants for clients in the foundry industry to clean and process the sand, so it can be reused through the green sand reclamation process. While 70 per cent of the total sand can be reused, the other 30 per cent, in the form of foundry dust, is too fine to be used again, he explains.

Foundry dust (comprises silica, clay and carbon) is a significant waste for the foundry industry; it is also difficult to dispose of as the particles are extremely light and can remain suspended in the air, causing pollution.

Manish knew that fly ash was being used to make bricks, so he decided to approach manufacturers who were doing the same. But on experimentation, he found that it only used tiny amounts of the foundry dust, which defeated the purpose.

He then found that plastic could act as an excellent binding agent with the foundry dust and arrived at the perfect composition for the bricks by mixing 25 per cent plastic with 75 per cent foundry dust. Thus, the first version of the Rhino bricks came into being in late 2018.

R+D Studio is a design and architectural firm in Gurugram, founded by partners Shikha Doogar and Shridhar Rao. After several years of practice in Dubai and the US, the husband-wife duo decided to return to India and start their firm. Shikha is Manishs niece, and often consults with Manishs firm for his design needs.

I was on their factory site and saw a bag of foundry dust. I asked Manish about it, and he told me about how he was planning on converting the dust into bricks. Once they finally got their composition right, we collaborated on fixing the dimensions, weight, and other characteristics for the bricks, shares architect Shridhar Rao.

Later, Shridhar founded R+D Labs, their architectural research and testing vertical, in June 2020. We were conducting tests for quite some time and planned on testing the bricks further to understand how they fare in comparison to conventional ones, he says.

Manish, on the other hand, says that the collaboration has been helping them navigate the application of the bricks in the architectural space. We could understand the usability of the bricks and Shridhars network helped spread awareness in the architectural community, he says.

Through the initial tests, a lot of merits came to be known. For instance, conventional clay bricks can sustain between 3.5-7 kg per cm square, while Rhino bricks can sustain about 14-15 kg per cm square because of the compressive strength of the ingredients.

Chetan Shah, business head at AIA Engineering, informs that he learned about Rhino bricks in February 2020 when he met Manish at an exhibition. As a manufacturing company that dabbles in making castings (in addition to other design and development verticals), they had a lot of foundry dust in their factory units in Ahmedabad.

Rhino Machines also helps quite a few institutions get rid of their plastic waste. One such is the Sri Krishna Hospital in Ahmedabad, that has gotten rid of over 3,600 kg of waste. Rupesh Prakash Nagpure, 46, Head of Housekeeping and Waste Management at the hospital, says that waste is being picked up for free twice a week since September 2019.

We have designated areas for the collection of biomedical and other plastic waste. Since we dont have an autoclave machine on-site, we provide them with plastic bottles, packets, wrappers, etc. Once we can sterilise biomedical waste on our own, we plan on supplying that too, informs Rupesh.

The initial hiccups were to set up their plant, doing something new. Although we have built a plant that can process about 600 kg of waste in a day, building it required an investment of nearly Rs 30 lakh. Still, not all aspects of our production are mechanised, and we are looking at ways to reduce the workforce, he says.

Another challenge was accessing plastic. This may sound ironic, perhaps since there is so much plastic waste everywhere, but the problem is with segregation. When plastic waste is mixed with wet waste, it is very difficult for us to use it to make the bricks, Manish informs.

To overcome this, Manish is spreading awareness among schools and society buildings to segregate waste. Collaborating with these stakeholders, he has been able to bring plastic to his factory in small amounts.

Now, Manish is looking to diversify the applications of the bricks. We are exploring this new technology where we make interlocking bricks, which essentially work like Lego. This will eliminate the use of cement and mortar in construction processes, making the product more eco-friendly, he says.

He is also looking forward to setting up plants on the sites of different foundry factories so that waste can be managed at source. At the same time, Shridhar hopes that there is more government collaboration where schools and hospitals can be built with these bricks. The bricks can be used in all constructions.

Our objective is to manage waste effectively and efficiently. We want to stay true to these values. The larger picture is to look at new ways of converting waste into wealth, and that motivates us, says Manish.

We at The Better India want to showcase everything that is working in this country. By using the power of constructive journalism, we want to change India one story at a time. If you read us, like us and want this positive news movement to grow, then do consider supporting us via the following buttons:

The Better Home is a range of safe and eco-friendly home cleaners by The Better India. We put out curated content on our Instagram account- green living hacks, green innovations, leading a no-tox life and heroes in the sustainability space.

manufacturing businesses for sale india, 29 available to buy now

manufacturing businesses for sale india, 29 available to buy now

Elevator business for sale in India. India is the second-largest market in the world for Elevator Industry. You can make an entry in India with an established player and shorten your learning curve... More details

Running business of power tools like grinder, drill machine, blower, abrasive products.Customer like industry, hardware store and local customer. Profitable business. For more information, please... More details

The offer is in two parts - one is simply the facility which is land, building & machinery. The second part is the brand and business. This facility is suitable only for someone aiming for a very... More details

Products: Bleached cotton, Surgical Absorbent cotton, Non Absorbent cotton, cotton bandages, Gumjee roll, Pad cast, Hand sanitizer, Hand rub, Sodium Hypochlorite, Hydrogen Peroxide 3&6%, Hand wash... More details

16 yrs renowned Engineering Testing Equipments company in chennai available for mutual business takeover / investment partners and etc.. Need an investment partners to fulfill the orders received... More details

Our company is an ISO 9001, 14001 certified and official Grid connected roof top empaneled agency in Gujarat, a leading cohesive solar solutions company. Our products are RoHS, CE and NABL lab... More details

Dear sir, attached is a Logistics company for sale. They have a pan India presence and own a fleet of over 800 vehicles. They also boast of clients like Ashok Leyland, Hyundai, Indian Oil, BPCL, HPCL... More details

The manufacturing plant is a grain-based distillery Unit utilizing jowar, maze, bajra, broken rice as raw material feed to manufacture extra neutral alcohol. It has its own Captive power plant as well. More details

Manufacturer of Niche API and Intermediates products in Chennai. Turn over around Rs 10 - Rs 15 Crores. Enough Land available for expansion. Budget : Rs 35 Crs. Asset Value: Around Rs 30 Crs. Only... More details

UNDER CONSTRUCTION PHARMA MANUFACTURING UNIT FOR SALE AT INDORE M.P.* Details are as below: 1. Plant is in under construction it's new pharmaceutical plant of formulation Tablet and capsules. 2. 90... More details

It is a Who GMP certified pharma formulations plant having its own brand of Medicines. The turn over is around Rs 25 Crs. Very good Profitability. The expected value is Rs 26 crs Please call or reach... More details

A 12 acre industrial N.A land is available for sale at chakan industrial area, Phase 2, Pune. It's a very well located clear title property at a prime location opposite Courtyard Marriott hotel. It... More details

Required running profit making manufacturing unit for buying in Maharashtra, preferably in Pune , Mumbai region. Preferred sectors : Automobile, e- vehicles, pharmaceutical, sugar mills, dairy... More details

The unit manufactures automotive components. Highly profitable. The turn over is almost around Rs 150 Crs. The expected valuation is around rs 300 Crs. ( Please reach out to me if your budget is... More details

Running Pvt Ltd engineering company for sale in Maharashtra* We are looking for buyer or investor for an engineering company situated in Nasik & Pune. This company is Tier 1 supplier to major... More details

Running & profit making FDA Licensed Chemicals manufacturing company for Sale at Dombivali MIDC, Maharashtra* This is a running & profit making 48 year old company, spread over 3000 square meters of... More details

The plant is located in Andhra Pradesh. It has state of the art facilities. The turn over is more than Rs 150 Crs plant. It has huge potential to expand and also huge exports potential. The asked... More details

The API plant is based in Gujarat. It has turn over of more than Rs 35 Crs. It has huge expansion potential with its production capacity. The asking price is Rs 40 Crs. ( Serious Buyers only with a... More details

closed pharma company available for sale at jejuri midc near pune* Details of property: 1)The plot area is about 129504 sq. m (32 Acres). 2)Total built up area is approx. 9417 sq.meters.( 1 Lakh +... More details

The company is highly established and growing exponentially every year. The last two years turn over has been more than Rs 200 Crs. This year the expected turn over is around Rs 210 crs. The company... More details

The company is established and successfully growing every year. Currently it is at a run rate of Rs 100 crs Revenue for Fy 20-21. The company manufacturers steel and aluminum motor components for... More details

It is a renowned modern flour mill for sale in Madhya Pradesh. The mill is located in famous Industrial area of Indore. The unit was started in 2010 which was operational till July 2018. Its a modern... More details

5 Storied Factory in Prime Area (Industrial) in Kolkata spread over 30 cottah, supplying to Railways.Products are Lead Oxide Batteries for Corporate, Rail, PSU, Solar, and Retail, Automobile, Aircraft... More details

Established in 1996, the website is an international marketplace of businesses for sale. We provide a cost-effective route to market for business owners and their representatives and a one stop shop for aspiring entrepreneurs and business buyers.

centre approves 2 electronic manufacturing clusters for telangana, andhra pradesh - the financial express

centre approves 2 electronic manufacturing clusters for telangana, andhra pradesh - the financial express

The Ministry of Electronics and Information and Technology has given approval to set up two electronics manufacturing clusters in Telangana and Andhra Pradesh. Ajay Kumar, additional secretary, Ministry of Electronics and IT tweeted that the Centre has given approval for 500 acre electronic manufacturing cluster to be set up by APIIC in Chitoor in Andhra Pradesh and the project cost will be Rs 340 crore.

Approval by @GoI_MeitY for 600 acre Electronic Mfg Cluster to be set up by TSIIC in Hyderabad. Project Cost Rs 667 [email protected] @KTRTRS, Kumar said in another tweet. Reacting to it, Telangana IT and industries minister KT Rama Rao tweeted, thanks Ajay Ji (Ajay Kumar) for the good news.

When contacted a senior official of Telangana Government said they applied for two clusters and approval for the second one is awaited.He however, did not give any time-frame. Explaining about the cluster, the official said in a bid to reduce dependence on the import of electronic components from countries such as China and Korea, the Centre, in 2013 devised a scheme to encourage local manufacturing.Under the EMC scheme, the Ministry (Ministry of electronics and IT) would support about one third of the total project cost for setting up EMC. The rest of the fund has to be arranged by the respective state Government. The amount is used to create infrastructure for setting up electronic components manufacturing units, the official told PTI. He said out of Rs 667 crore, the Centre will fund Rs 240 crore as grant and the rest would be mobilised by the state government and through units which are interested to set up shop in the cluster.The Telangana Government has requested the Centre to sanction two EMCs one e-city at Ravirial and another one Maheswaram Science Park at Maheswaram near the International Airport. Approval for the one at Maheswaram is yet to come, said the official. Get live Stock Prices from BSE, NSE, US Market and latest NAV, portfolio of Mutual Funds, Check out latest IPO News, Best Performing IPOs, calculate your tax by Income Tax Calculator, know markets Top Gainers, Top Losers & Best Equity Funds. Like us on Facebook and follow us on Twitter.Financial Express is now on Telegram. Click here to join our channel and stay updated with the latest Biz news and updates.HomeINDUSTRYCentre approves 2 electronic manufacturing clusters for Telangana Andhra Pradesh

He however, did not give any time-frame. Explaining about the cluster, the official said in a bid to reduce dependence on the import of electronic components from countries such as China and Korea, the Centre, in 2013 devised a scheme to encourage local manufacturing.Under the EMC scheme, the Ministry (Ministry of electronics and IT) would support about one third of the total project cost for setting up EMC. The rest of the fund has to be arranged by the respective state Government. The amount is used to create infrastructure for setting up electronic components manufacturing units, the official told PTI. He said out of Rs 667 crore, the Centre will fund Rs 240 crore as grant and the rest would be mobilised by the state government and through units which are interested to set up shop in the cluster.The Telangana Government has requested the Centre to sanction two EMCs one e-city at Ravirial and another one Maheswaram Science Park at Maheswaram near the International Airport. Approval for the one at Maheswaram is yet to come, said the official. Get live Stock Prices from BSE, NSE, US Market and latest NAV, portfolio of Mutual Funds, Check out latest IPO News, Best Performing IPOs, calculate your tax by Income Tax Calculator, know markets Top Gainers, Top Losers & Best Equity Funds. Like us on Facebook and follow us on Twitter.Financial Express is now on Telegram. Click here to join our channel and stay updated with the latest Biz news and updates.HomeINDUSTRYCentre approves 2 electronic manufacturing clusters for Telangana Andhra Pradesh

Under the EMC scheme, the Ministry (Ministry of electronics and IT) would support about one third of the total project cost for setting up EMC. The rest of the fund has to be arranged by the respective state Government. The amount is used to create infrastructure for setting up electronic components manufacturing units, the official told PTI. He said out of Rs 667 crore, the Centre will fund Rs 240 crore as grant and the rest would be mobilised by the state government and through units which are interested to set up shop in the cluster.The Telangana Government has requested the Centre to sanction two EMCs one e-city at Ravirial and another one Maheswaram Science Park at Maheswaram near the International Airport. Approval for the one at Maheswaram is yet to come, said the official. Get live Stock Prices from BSE, NSE, US Market and latest NAV, portfolio of Mutual Funds, Check out latest IPO News, Best Performing IPOs, calculate your tax by Income Tax Calculator, know markets Top Gainers, Top Losers & Best Equity Funds. Like us on Facebook and follow us on Twitter.Financial Express is now on Telegram. Click here to join our channel and stay updated with the latest Biz news and updates.HomeINDUSTRYCentre approves 2 electronic manufacturing clusters for Telangana Andhra Pradesh

The Telangana Government has requested the Centre to sanction two EMCs one e-city at Ravirial and another one Maheswaram Science Park at Maheswaram near the International Airport. Approval for the one at Maheswaram is yet to come, said the official.

Get live Stock Prices from BSE, NSE, US Market and latest NAV, portfolio of Mutual Funds, Check out latest IPO News, Best Performing IPOs, calculate your tax by Income Tax Calculator, know markets Top Gainers, Top Losers & Best Equity Funds. Like us on Facebook and follow us on Twitter.

j.v. manufacturing announces staff changes - recycling today

j.v. manufacturing announces staff changes - recycling today

In his new position, Lind will oversee the companys sales and marketing activities. Linds previous work in the solid waste industry earned him WASTECs (Waste Equipment Technology Equipment Association) Production Employee of the Year award in 2003. J.V. Manufacturing also announced the promotion of Brian LeBlanc to the position of director of manufacturing. In his new position, LeBlanc will plan, direct and coordinate the operations of all production departments as well as manage regulatory compliance and process improvements. LeBlanc has been with J.V. Manufacturing for 10 years as plant superintendant.

India-based Doll Plast Machinery has introduced the Plastic & Paper (Pulp) Separator Machine, which the company says can allow paper mills to save 35 to 40 percent of paper from mixed plastic and pulp waste. Another benefit, according to the company, is the ability to resell plastic scrap recovered from the process. There are three different models available, including S25, offering 25 horsepower and the ability to process 60 to 70 kilograms per hour (kg/hr), the S50 operating at 50 horsepower and processing at 125 to 150 kg/hr, and the S100, which operates at 100 horsepower and processes at 125 to 250 kg/hr. More information is available at www.dollplast.com.

International Paper (IP) has entered into an agreement with L.N. Bangur and related family members and affiliates to purchase about 53.5 percent of the outstanding shares of the Indian paper company Andhra Pradesh Paper Mills Ltd. (APPM) for about $257 million. In addition, IP has agreed to a $62 million non-compete payment to the sellers. Bangur is executive chairman of the Bangur Group. APPM is a part of the Bangur Group. Pursuant to Indian securities law, IP also will launch a mandatory public tender offer to acquire an additional 21.5 percent of the outstanding shares of APPM for about$104 million in cash. IP anticipates acquiring up to 75 percent of APPM's outstanding shares through the two transactions. According to a release, once completed, the transaction will position IP as the first global paper and packaging company with a significant position in India. "APPM is an established and highly respected company in India and is an excellent platform for International Paper to grow with the Indian paper and packaging markets," says John Faraci, IPs chairman and CEO. "Both APPM and the India paper and packaging industry are growing at substantial rates, and we believe that IP's global operations and technical expertise can accelerate that growth and create value for customers as well as IP and APPM shareholders." Bangur says, "We have built a strong business in India, and the next phase of growth requires a different set of resources and capabilities. International Paper is the right company to take the business forward and deepen maturity of the sector in India." APPM has two mills in India with combined capacity of about 250,000 metric tons of uncoated freesheet paper per year.

Emery Winslow Scale Co., Seymour, Conn., has introduced the RoadWeigh II Truck Scale, which the company says is designed for applications that require an above-ground installation as an option to a shallow pit, eliminating the need for approach aprons. The weigh-bridge is constructed of 12-inch wide flange beams and 12-inch C-channels for strength and durability, according to the company. The standard top deck is a -inch diamond safety plate with an optional 3/8-inch plate for heavy-duty applications. According to Emery Winslow, the RoadWeigh II Series is designed without any electronic components beneath the weighbridge and designed with the Hydrostatic PermaCell, which the company says provides immunity to environmental factors that cause electronic load cells to fail. The PermaCell is guaranteed for life against failure from lightning, water and rodents. It also comes with a 10-year warranty against failure from defects in material and workmanship. For more information and a free video, contact Dave Young at 203-881-9333 Ext. 14, or visit www.emerywinslow.com.

Franklin Miller, Livingston, N.J., has introduced its new, compact Delumper 1065N, a crusher specially designed to handle compressed products, silver and other agglomerates, minerals and plastics. The unit has a hardened alloy one-piece cutting drum fitted with more than 200 tapered teeth. The DC1065N operates at low speed and features low noise and vibration. The unit can be provided with a direct gear drive or belt drive as required. The Delumper 1065 is available in carbon steel as well as 304 and 316 stainless steel construction. The unit is only 7.5 inches from inlet to outlet and features a 6-5/8-inch by 11-inch inlet opening. The DC1065N is supplied with rugged outboard bearings protected by shaft seals to keep powders within the cutting chamber. Product is crushed by the cutting drum intermeshing with special sizing combs and discharged out the bottom. The 1065 is part of a complete line of Delumper Crushers by Franklin Miller Inc. that includes in-line, ultra-sanitary and twin shaft units. For more information visit www.franklinmiller.com.

tirumala cotton & agro products private limited, thimmapuram chilakalu

tirumala cotton & agro products private limited, thimmapuram chilakalu

* This phone number available for 3 min is not the recipients number but a number from a service which will put you through to that person. This service is produced by Kompass. Why this number ?

* This number, only available 3 minutes, is not your correspondants number but the number of a service putting you through to that person. This service is produced by Kompass. Why this number ?

The data we collect are only those necessary for the proper use of our service. By continuing to use our services beginning May 25, 2018, you acknowledge and agree to our updated Privacy Policy and Cookies Policy.

established manufacturing businesses for sale in hyderabad

established manufacturing businesses for sale in hyderabad

IndiaBizforSale.com enables SMEs quick deal-sourcing, matchmaking, and end-to-end deal management through technology platform and advisory services. Our clientele includes businesses and professionals who are looking to buy and sell businesses, secure investment opportunities, and explore strategic growth options such as joint ventures, distribution partnerships and franchising.

Manali E-Business Pvt Ltd (CIN: U51109GJ2013PTC073316) 63, Prakruti Bunglows, Sterling City, Bopal, Ahmedabad Guj 380058 [emailprotected] Contact person : Bhavin Bhagat

manufacturing investment opportunity for sale in telangana

manufacturing investment opportunity for sale in telangana

IndiaBizforSale.com enables SMEs quick deal-sourcing, matchmaking, and end-to-end deal management through technology platform and advisory services. Our clientele includes businesses and professionals who are looking to buy and sell businesses, secure investment opportunities, and explore strategic growth options such as joint ventures, distribution partnerships and franchising.

Manali E-Business Pvt Ltd (CIN: U51109GJ2013PTC073316) 63, Prakruti Bunglows, Sterling City, Bopal, Ahmedabad Guj 380058 [emailprotected] Contact person : Bhavin Bhagat

ampere ev by greaves - electric scooters in india

ampere ev by greaves - electric scooters in india

Giving access of electric mobility solutions to millions of individuals at the bottom of the pyramid, Ampere by Greaves specializes in last mile, affordable mobility solutions. These stylish Ampere electric scooters have low TCO and provide emission-free transportation.

Life in Mumbai is chaotic, happening, and always on the go. To keep up with this fast-paced city you need an electric scooter that complements your lifestyle. One that is unstoppable and can thrive in the unpredictability of this city. An electric scooter that is stylish and comfortable for the true Mumbaikar. Riding an electric scooter in Mumbai...

Select State Andhra PradeshArunachal PradeshAssamBiharChhattisgarhGoaGujaratHaryanaHimachal PradeshJammu and KashmirJharkhandKarnatakaKeralaMadhya PradeshMaharashtraManipurMeghalayaMizoramNagalandOdishaPunjabRajasthanSikkimTamil NaduTelanganaTripuraUttar PradeshUttarakhandWest Bengal

Select State Andhra PradeshArunachal PradeshAssamBiharChhattisgarhGoaGujaratHaryanaHimachal PradeshJammu and KashmirJharkhandKarnatakaKeralaMadhya PradeshMaharashtraManipurMeghalayaMizoramNagalandOdishaPunjabRajasthanSikkimTamil NaduTelanganaTripuraUttar PradeshUttarakhandWest Bengal

Related Equipments