magnetic separator ctb

ctb magnetic separator

ctb magnetic separator

CTB magnetic separator is a wet type weak magnetic field permanent magnetic separator with cylinder type. It has the following advantages: energy saving, high magnetic induction intensity, simple structure, low price, easy operation and maintenance, small floor space required and large processing capacity etc. There are three kinds of tank structure: downflow, counterflow, and semi-counter flow, with a separation grain size of 6-0,0.6-0,1-0mm respectively.

3. Counterflow type permanent magnetic drum separator: slurry flows over against drum, which creates great conditions for cleaning of non-magnetic ores. The non-magnetic ores approach the clean surface of the drum and the magnetic ores can be absorbed in the strongest magnetic field.

4. Semi-counter flow types permanent magnetic drum separator: slurry is fed into cavity from the bottom of the drum, and the magnetic ores fall into concentrate tank after reaching a certain height, while the non-magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.

ctb (s/n) series magnetic separator for mineral beneficiation - crushers, ball mills and flotation cells for mining and mineral beneficiation

ctb (s/n) series magnetic separator for mineral beneficiation - crushers, ball mills and flotation cells for mining and mineral beneficiation

The flow direction of feed ore slurry is consistent with the drum rotation direction, with co-rotation of drum, the magnetic minerals are absorbed on the drum surface when the slurry flow through the drum separation area, and discharged on the concentrate outlet tank located on the opposite side of magnets system. Meanwhile, the non-magnetic and weakly magnetic minerals are discharged on the tailing outlet tank. The advantages of CTS Magnetic Separator is high capacity and high concentrate grade.

The Flow direction of feed ore slurry is opposite with the drum rotation direction, with counter rotating of drum, the magnetic minerals are absorbed on the drum surface when the slurry flow through the drum separation area, and discharged on the concentrate outlet tank located on the same side of feed box. Meanwhile, the non-magnetic and weakly magnetic minerals are discharged on the tailing outlet tank located on the opposite side of magnets system. the advantages of adverse current type magnetic separator:It could discard low grade tailing in a large quantity, reduce the load of secondary grinding, improve metal recovery and save the power and washer consumption.

The ore slurry feed into the separation are from the middle of the tank. The direction of feed is nearly the same with attractive force direction of magnetic field. With the co-rotating of drum, the magnetic minerals are absorbed on the drum surface and discharged on the concentrate outlet tank. Meanwhile, the non-magnetic and weakly magnetic minerals are discharged after scavenging area on the tailing outlet tank by the opposite rotary direction of drum. The horizontal plane of slurry in the tank keeps steady. the advantages of Semi adverse current CTB Magnetic Separator: It could improve both concentrate grade and metal recovery.

Magnetic system consists of high-quality strontium ferrite and NdFeB rare earth magnets. The average magnetic field intensity on drum surface varies from 100 to 700mT. Concurrent, counter-current or counter-rotation tank configuration is available as required. Alternative multi-step tandem configuration saves site area and simplifies process. Stable separation, large processing capacity, easy to operate and maintain.

ZJH mainly focus on producing and supply crushers, ore grinding equipment, mineral Beneficiation equipment, laboratory and pilot scale ore dressing equipment for Mining and Mineral Processing Industry. Our aim is to work together with Mines, Mineral Beneficiation Plantsfor helping to reduce the operating cost ,to improve the operating efficiency.

henan zhengzhou mining machinery co., ltd.. supplier from china. view company

henan zhengzhou mining machinery co., ltd.. supplier from china. view company

Gas Burner is research and developing for rotary kiln that burning with single or various gas fuel, which not only ensure all the advantages and specificity of four-channel burner, but also enhance the application of burning. The burner have special structure and reasonable technical parameters, guarantee the gas fuel fully mixing with air, primary air and secondary air, which to ensure stronger heating intensity, higher burning efficiency, easier adjustment. Burner can be applicable for various metallurgy and chemical rotary kiln. Application Burning System for Rotary kiln on industry fields like Power, Chemical, Metallurgy, Building material etc. Its special advantages as follows: 1.Stability flame with regular flame shapes, no phenomenon like fluctuation and sweep kiln liner, that will outstanding extend the life time of kiln liner.  2.Good mixing performance with gas fuel, primary air and secondary air, burning abundantly, that can be enhance heating intensity and reduce primary air proportion at same time, then will improve kiln capacity and reduce energy consumption.  3.No strong eddy between flame and bowl effect produced by flame cover, can avoid appearance of temperature peak and make evenly distribution of flame temperature, then effectively protect cylinder and guard plate of kiln inlet. 4.Due to more fully mixing with combustion air and fuel gas, the burning will be more quickly and fully, which will reduce the content of CO and NOX from kiln inlet, but also better for safety operating and realizing green production.  5. The nozzle has made by special material with advantages like heat-resistance and easy to change. 6.Simple operation and adjustment. When operating, erupt speed of each air pipe can be change via adjust sectional area, then will realize goals like adjustment of flame shape and strength. Gas Burner is mainly composed with Pipe, Nozzle, Ignition device, Metal corrugated compensator, Butterfly valve, Pressure measurement and Protection layer etc. The mainly features are: 1. Pipeline From outside to inside respectively, the pipeline has consist of Axial wind channel, Swirling wind channel, Gas wind channel, central wind channel and ignition channel. And the ignition is just for igniting, so called four-channel burner. 2. Nozzle Nozzle made by special material, spray mouth sectional area of axial wind channel, swirling wind channel and gas wind channel are adjustable, so that can adjust the spray speed of each channel. The nozzle is the key part to ensure flame shape. 3.Ignition Device Located in the central wind channel, used for automatic igniting. 4.Metal Corrugated Compensator Which is the key part to connect each channel, sealing and adjust flame shape, and allowed process axial movement with connected channel.

Ore ball mill is used to separate and screening different ore minerals, separate ore tailing. It also be used for ore grinding, non-ferrous metal beneficiation, new-type building material producing. According to the discharge method, the ball mill divided to dry-type mill and wet-type mill. Our products advantages of ore ball mill: High grinding efficiency, low consumption 2. Product fineness is adjustable and uniform. 3.Low energy consumption, low wear, low operating costs. 4. Small vibration, low noise, environmental friendly 5. Liner is made of high-quality wear resistant material with high strength, wear resistance and long working life. Ore ball mill is mainly consisting of feeding device, big gear, discharge device, cylinder, diaphragm plate, hollow shaft, liner, drive device and other components. 1. The feeding device is consisting of inlet chute and screw. There are liners in the inlet chute, which can extend the working life of the feeding device. 2. There is pre-gap on the inlet hallow shaft, that can reduce the tolerance which is made of temperature changes and installation mistake to ensure the gear mesh. 3. Inside the ball mill, different parts have different liner structure, which will greatly improve the grinding efficiency. 4. Dry-type ball mill adopt sliding bearing, which is good of strength, ductility, antifriction, abrasion resistance, lubricity and thermal conductivity. It is able to meet the lubrication requirements of the hollow shaft. That is suitable for the environment of low speed and heavy load in metallurgical & ore dressing industry. 5. Wet-type ball mill adopt roller bearing, reduce useless work consumption and easy to replace.

This rotary cooler equipment can quickly cool higher-temperature of granular compound fertilizer directly Approximately to normal atmospheric temperature, which is convenient for timely and quick packing and Prevents compound fertilizer from forming block during store. It can achieve adverse Flow cooling, which can reduce pollution and improve working environment. It has many characteristics such as reasonable structure, stable run, strong adaptability etc.. Features of cooler: 1.High cooling efficiency 2.Simple structure, low rate malfunction, convenient operation, low cost of maintenance, stable operation. 3.Wide usage, can be used for the drying of different materials in powder, granule, strip, lump, large elasticity Of operation. Output is allowed to have larger fluctuations in manufacturing, but not allowed to influence the Quality of the products. 4.Easy to install and remove Application range of cooler: 1. Chemical industry: ammonium sulfate, sodium sulphide, anfu powder, ammonium nitrate, Urea, oxalic acid, bichromate potassium, pvc, nitrophosphate fertilizer, fytic acid, Phosphate compound fertilizer. 2. Food industry: glucose, salt, sugar, vitamin malted milk, granular sugar. 3. Mining products: ceramic sand , coal, coal slime, manganese ore, limestone, pyrite, peat, etc. 4. Others: iron powder, flat soybean

Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 12C. Customized dust collector for usage at high temperatures (less 23C) is also available.

Advantages of magnetic separator: 1)Newest CTB series magnetic separator In China 2)Simple structure, high yield; 3)Covenient operation; 4)Granularity blow 0.5m Application of magnetic separator: Newest STB Series magnetic separator In China. This series of products is used in wet magnetic separation of materials with granularity below 3mm like magnetite, pyrrhotine, bake ore and washingtonite. It is also used for deironing materials like non-metal ores, coal and building materials. Average magnetic induction of barrel surface is 100-600mT. According to customer's demands, it can provide magnetic separation with different magnetic induction like forward flow, semi counter flow and counter flow. The products have features, such as simple structure, high yield, convenient operation and easy maintenance. Characteristics of Magnetic separator: The products have geatures, such as simple structure, high yield, convenient operation and easy maintenance.

Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 120C. Customized dust collector for usage at high temperatures (less 230C) is also available.

NE Plate Chain Elevator takes advanced technology from home and abroad. This products is suitable for vertical transportation of powder, granular, and bulk materials, also for high hardness materials. The temperature of materials should not be higher than 200 degree celsius. Max. Elevation height 40m. Advantages: Wide range of elevating height. Strong capacity and small driving power. Feeding materials by automatic flowing and discharge through gravity induction. Long service life and good leak tightness. Stable and liable operation, easy maintenance. Low running cost. Bucket elevator The description of bucket elevator: Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat. Bucket elevator can be divided into belt type and chain type, and the common characteristic is used for vertical transportation of powder, granulated and small lump materials. It has compact structure, small covering area, large hoisting height, good sealed performance. Tape bucket conveyor is lightweight, flexible, simple handling maintenance and low noise, which can be used to transport density 1.5 t/m3 granular or small conveying of bulk materials. Advantage of Bucket Elevator: The bucket conveyor has the advantages of big conveying capacity, high hoisting height, stable and reliable running and long service life. The machine is applicable for the crushed materials, and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain tructure. Henan Zhengzhou Mining Machinery Co., Ltd. Specializes in manufacturing bucket elevator. Henan Zhengzhou Mining Machinery Co., Ltd. Designs and manufactures a wide variety of bucket elevators based on the characteristics of the bulk material and the process requirements. Designed to handle a wide variety of bulk materials from average to very free-flowing. Welcome to consult and order.

Gz series electromagnetic vibrating feeder Vibrating feeder is widely used in crushing, screening production line of mining, cement, metallurgy, building materials, chemical, mineral processing, coal mining and industries. The vibrating feeder is used to mine material from a storage silo or other material storage equipment in uniform or quantitative supply to the equipment of subject material, and is the necessary equipment to practice routine automation. Introduction of the vibrating feeder: Gz series electromagnetic vibrating feeder mainly used for mining, metallurgical, chemical, coal, machinery and other industries in to the accepting machine. Being diversification, this series of products can be specially designed and produced according to the customers' need. Furthermore, all types of electromagnetic vibration feeder can be easily implemented manual or automatic control. Henan zhengzhou mining machinery co., ltd. Is a large professional manufacturer of vibrating feeder. We can provide our customer with a good consultant and assistant, to ensure our customer's investment will be rewarded with great profit. At the same time, select the right model of equipment for customer. To meet our customer's special needs, we can design and develop customized products.

Introduction: PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. PF Series Impact Crusher is mainly used in secondary crushing, and can crush material o f crushing compression strength no more than 320 Maps. It is suitable to produce high rank highway, hydroelectric and building material and such industry as stone. (1)Even crushing function of multi-cavities which is suitable to crush hard material. (2)Reasonable design of leveling plate making the finished material finer and cubic-shaped without internal cracks. (3)Low and big feed opening make the production line easy to arrange and increase the size of feeding material. (4)Hydraulic start-up which is convenient for maintenance and replacement of wear-parts. (5)New anti-abrasive material which prolong service life of impact hammer, impact plate and liner. Advantages: 1 Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2 The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3 The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4 Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5 The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically.

Pulse Jet Bag Filter incorporates the advantages of the several kinds of bag filters and is equipped with high performance pulse valve. This kind of bag filter can be used in building material, metallurgy, chemical and refractory industries, especially the crushing, packing, clinker cooling and grinding workshops in cement production. It is also suitable for dust collection of coal grinding after some modification. Application: Building material, metallurgy, chemical and refractory industries. Output: Volume(m/h): 67300-314000 Filtration area(m2): 935-4361 Net filtration area(m2): 4205 Dust content at inlet(g/m):

Related Equipments