The ball mill is a kind of grinding machine, which is the key milling machine used after the material has been crushed, and it also has a mixing effect. This type of grinding machine has a cylindrical body with spherical grinding mediums and materials.
The centrifugal force and friction generated by the rotation of the fuselage bring the material and the grinding medium to a certain height and then fall. Impact and friction grind the material into fine powders.
It is widely used in cement, silicate, new construction material, refractory material, chemical fertilizer, ferrous metal and non-ferrous as well as ceramics, and widely applied to dry or wet grinding for ores and grindable materials. The wet type is often equipped with a classifier, and the dry type is configured with a suction and separation device.
Both of the dry and wet ball mills are composed of feeding port, discharging port, turning part, and transmission parts such as retarder, small transmission gear, motor, electronic control. The wet grinding can be widely used, because most of the minerals can be wet milled.
The ball mill is equipped with a cylindrical rotating device and two bins, which can rotate by gears. The discharge port is straight, and there are also air intake devices, dust exhaust pipes, and dust collectors.
The material from the feeding device is uniformly fed into the first bin of the mill by the hollow shaft spiral. This bin has stepped lining or corrugated lining, which is filled with steel balls of different specifications.
The rotation of the cylinder generates centrifugal force to bring the steel ball to a certain height, and then fall, which will hit and grind the material. After the material is coarse grinding in the first bin, it will enter the second bin through the single-layer partition plate.
This bin is embedded with a flat liner, and the steel balls inside will further grind the material, then the powder is discharged through the discharge grate to complete the grinding. We can't add water or other liquids during the grinding process.
The material needs to be added water or anhydrous ethanol during the grinding process. We must control the grinding concentration, otherwise, it will affect the grinding efficiency. The amount of water depends on the use of the mud, the amount of clay in the formula, and the water absorption of the clay.
It will be gradually pulverized under the action of impact and grinding. The movement of the ore needs to be driven by the water. The bulk material will be cracked under the impact and grinding of the grinding medium, with the crack gradually increasing and deepening, the final material will be separated from the crack to achieve the effect of bulk material being ground.
The grinding ore will be discharge through the discharge port, and then the discharged mineral will be classified into the qualified product in a spiral classifier, with the coarse sand being returned to the ball mill through the combined feeder to continue grinding.
The feeder feeds material continuously and evenly, the ground material will be continuously discharged from the ball mill. The wet ball mill can be divided into three types according to the motion characteristics: a simple swing type wet ball mill, a complex swing type wet ball mill, and a hybrid swing type wet ball mill.
The dry grinding is suitable for materials that can react with water, which may not be used for wet grinding such as cement, marble and other building materials. Some products which require storage and sale in powder form is suitable for dry grinding, and in some other arid areas, because of the lack of water resources, dry grinding can also be used to save water.
Wet grinding is suitable for most materials, such as all kinds of metal ore, non-metallic ore. As long as it is water-repellent and will not affect the quality of the finished product, the material can be used for wet grinding.
Common ore includes copper ore, iron ore, molybdenum ore, phosphate rock, feldspar mine, fluorite ore, etc. The proportion of steel balls, materials, and water in wet grinding is 4:2:1. The detailed proportion can be determined by grinding experiments.
At the same time, the size of the alumina grinding balls is also required. If the ratio is good, then the ball milling efficiency will be greatly improved. Generally, there are large, medium and small balls, and the better ratio between them can also be obtained through experiments.
The dry milling process may be used when the particle size of the powder is not required to be very fine or when the ball milled product is to be stored or sold in powder form. For example, in the production of cement, it is necessary to choose dry grinding instead of wet grinding, otherwise, it will be difficult to meet our needs.
Wet grinding is generally used in mineral processing, because the wet ball mill has the advantages of strong materials adaptability, continuous production, large grinding ratio, easy to adjust the fineness of the milled products, and it is widely used at present.
Since the dry and wet ball mill equipment has its own advantages, we must find out the suitable grinding type that the material is suitable for so that we can ensure quality and efficiency. Welcome to consult Fote company, where our professionals will give you a satisfactory answer based on your needs.
As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.
Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.
Wet type ball mill are mostly used in the industry production. It is to increase the high grinding efficiency under the ball mill grinding and striking, from which the granularity is even and no flying dust with little noise, being the most universal powder machine in the benefication as powder grinding the ferrous metal like gold, silver, plumbum, zinc,copper,molybdenum,manganese,tungsten etc, as the nonmetal powder grinding like graphite,feldspar, potash feldspar, phosphorus ore, fluorite, clay, and swell soil etc. The wet type ball mill need to add the liquid into the grinding ball media auxiliary (water or ethanol). The material output gate is trumpet shape, with screw device inside, easy to discharging the material.
Copyright Zhengzhou Bobang Heavy Industry Machinery Co.,Ltd. E-mail : [email protected] Tel0086- 86656957 Address No.11 West Construction Road, Zhongyuan District,Zhengzhou City,Henan Province, China
A wide variety of nano wet ball mill options are available to you. You can also submit buying request for the abs sensor and specify your requirement on okchem.com, and we will help you find the quality nano wet ball mill suppliers.
There are a lot off suppliers providing nano wet ball mill on okchem.com, mainly located in Asia. The nano wet ball mill products are most popular in India, Pakistan, Vietnam, Indonesia, Brazil, Russia, Mexico, United States, Turkey, Germany, etc.
Grid ball mill is widely used in smashing all kinds of ores and other materials, ore dressing and national economic departments like building and chemical industries etc. The size of ore shall not exceed 65mm and the best feed size is under 6mm. The effect in this job is better than coarse grinding. Grid ball mill consists of the shell, feeding part, discharging part, main bearing, lubricating system, driving system and other parts. There is wearing a liner inside the shell, and both ends of the shell are provided with a flange. The end cover of the mill is connected with the flange plate. The feeding part consists of the head, trunnion and feeding device. The discharge part includes the grid plate, head, and discharge trunnion.
Wet Grid ball mill is mainly used for mixing and grinding materials in two types: dry grinding and wet grinding .It has advantages of fineness uniformity and power saving. The machine uses different types of liner to meet different customer needs. The grinding fineness of material can be controlled by grinding time. The electro-hydraulic machine is auto-coupled and decompressed to reduce the starting current, and its structure is divided into integral type and independent type.
Compared with similar products,Wet Grid ball mill has the characteristics of low investment, low energy consumption, novel structure, simple operation, stable and reliable performance. It is suitable for mixing and grinding ordinary and special materials. The users can choose the right type, liner and medium type by considering the specific gravity, hardness, yield and other factors. The grinding medium is Wet Grid ball.
1.The ball mill is composed of a horizontal cylinder, a hollow shaft for feeding and discharging, and a grinding head. The main body is a long cylinder made of steel. The cylinder is provided with an abrasive body, and the steel lining plate is fixed to the cylinder body. The grinding body is generally a steel ball and is loaded into the cylinder according to different diameters and a certain proportion, and the grinding body can also be used with a steel section.
2.According to the particle size of the grinding material, the material is loaded into the cylinder by the hollow shaft of the wet grid ball mill feeding end. When the ball mill cylinder rotates, the grinding body acts on the cylinder liner due to the action of inertia and centrifugal force and friction. It is carried away by the cylinder. When it is brought to a certain height, it is thrown off due to its own gravity. The falling abrasive body crushes the material in the cylinder like a projectile.
3.The material is uniformly fed into the first chamber of the mill by the feeding device through the hollow shaft of the feeding material. The chamber has a step liner or a corrugated liner, and various steel balls are loaded therein. The rotation of the cylinder generates centrifugal force to bring the steel ball to a certain extent. The height drops and then hits and grinds the material. After the material reaches the rough grinding in the first bin, it enters the second bin through the single-layer partition plate. The bin is embedded with a flat liner with steel balls inside to further grind the material. The powder is discharged through the discharge raft to complete the grinding operation.
The main function of the steel ball in the ball mill is to impact crush the material and also play a certain grinding effect. Therefore, the purpose of grading steel balls is to meet the requirements of these two aspects. The quality of the crushing effect directly affects the grinding efficiency, and ultimately affects the output of the ball mill. Whether the crushing requirement can be achieved depends on whether the grading of the steel ball is reasonable, mainly including the size of the steel ball, the number of ball diameters, and the ball of various specifications. Proportion and so on.
The ball mill is composed of the main part such as a feeding part, a discharging part, a turning part, a transmission part (a reduction gear, a small transmission gear, a motor, and electric control). The hollow shaft is made of cast steel, the inner lining can be replaced, the rotary large gear is processed by casting hobbing, and the barrel is embedded with wear-resistant lining, which has good wear resistance. The machine runs smoothly and works reliably.
Anyang General International Co., Ltd. (AGICO Group) is a ball mills supplier. Our company is mainly engaged in the development, design, manufacture, installation and commissioning of various mining and cement milling equipment and a complete set of the industrial grinding line. AGICO Group was founded in 1997, registered capital 81.34 million yuan, covers an area of 66,000 square meters, has nearly 30,000 square meters of factory buildings and more than 150 sets of various production and processing equipment.
With more than 20 years of experience in the manufacturing and research of mineral and cement milling equipment, AGICO has more than 50 technical patents. All of our ball mills, vertical roller mill, rod mill and AG/SAG mill have passed the ISO9001 international quality system certification.
The ball mill has a vital role in the cement manufacturing process. The mixed raw materials (cement raw meal) before cement production and the finished products (cement clinker) after cement manufacture need to be ground by cement ball mill. The grinding media balls in the ball mill are used in cement plant to help grind blocky or granular grindable materials produced in the cement manufacturing process, so as to achieve the effect of grinding. Vertical roller mill(VRM) and clinker grinding mill and other cement grinding mill are also very common in cement plant.
Various ball mill machines, vertical roller mills and sag mills are widely used in the mining industry. Grate ball mills and raw mills are mostly used for mineral processing in some enterprises of mining industries. Wet ball mill and rod mill are commonly used in mineral processing production line, to grind various hardness ore materials. Customers who need to grind iron ore, siderite, marble, kaolin, mica, feldspar and other ores have chosen our mineral grinding machine.
AGICO uses the latest clean coal technology to create a professional pulverized coal ball mill. Coal mill can grind pulverized coal with different fineness requirements, with high fineness and large output, which can meet the needs of large pulverized coal projects. Coal mill is often used in thermal power plant, cement plant, coal fire power plants, etc. We grind large pieces of coal into pulverized coal, which produces more energy when burned. Therefore, the rotary kilns, boilers and other kiln equipment in these large factories usually use pulverized coal as fuel.
Efficient and energy-saving ball mill, intermittent ball mill, ceramic ball mill, rod ball mill. These types of ball mills can crush materials with different attributes. It is widely used in silicate products, new building materials, refractories, fertilizers, ferrous and non-ferrous metal smelting, glass ceramics and other production industries. Vertical mill, Raymond mill, ring roller mill which divided by different grinding methods can also be used for the production of phosphor powder, nano materials, zinc oxide powder, catalyst, rare earth polishing powder and other materials.
Production capacity: 300t/d Processed material: Silver ore Input size: 25mm Equipment: Wet grate type silver ore ball mill, wet overflow type silver ore ball mill, jaw crusher, cone crusher, flotation machine, concentrator, filter press. Auxiliary equipment: Linear vibration screen, cyclone. Request A Quote Right Now Free Solution Design: [email protected] Project Description Equipment Features Beneficiation Process
Production capacity: 1500t/d Processed material: Copper ore Input size: 25mm Equipment: 98-386t/h copper ball mill, jaw crusher, cone crusher, flotation machine, concentrator, filter press. Auxiliary equipment: Linear vibration screen, cyclone. Request A Quote Right Now Free Solution Design: [email protected] Project Description Equipment Features Beneficiation Process Project Description The 1500t/d Pakistan copper mine project uses a
Production capacity: Annual output of 300,000 tons Processed material: Soft coal Input size: 25mm Equipment: 5 sets of 20tph coal ball mill Auxiliary equipment: Desulfurization, denitrification, dust removal and other devices. Request A Quote Right Now Free Solution Design: [email protected] Project Description Equipment Features Solution Advantages Project Description The project is to build a high-efficiency
Influencing Factors of Tumbling Mill Working Capacity Tumbling mill is also known as a ball mill or rod mill. They are all composed of a cylindrical cylinder lying horizontally on the bearing, and the material is ground into powder by rotating the cylinder. When we want to discuss the factors that affect the tumbling mill
The grinding mill liners are the main wearing part of the ball mill equipment. The ball mill liner replacement should in time when the lining plate is excessively worn. Therefore, the selection and design of mill liners have always been of great concern to users. Function Design of Ball Mill Liners As one of professional
As a ball mills supplier with 22 years of experience in the grinding industry, we can provide customers with types of ball mill, vertical mill, rod mill and AG/SAG mill for grinding in a variety of industries and materials.
DOVE Ball Mills are supplied in a wide variety of capacities and specifications. DOVE small Ball Mills designed for laboratories ball milling process are supplied in 4 models, capacity range of (200g/h-1000 g/h). For small to large scale operations, DOVE Ball Mills are supplied in 17 models, capacity range of (0.3 TPH 80 TPH).
With over 50 years experience in Grinding Mill Machine fabrication, DOVE Ball Mills as critical component of DOVE Crushing plants are designed with highest quality of material for long life and minimum maintenance, to grind ores to 35 mesh or finer.
DOVE Grinding Mills are supplied in a wide range of capacities and specifications, for reliable and effective grinding, size reduction applications and for diverse applications of either dry or wet ore.
DOVE Ball Mills have extended history in the Mining and Mineral Processing Industry, Construction, Solid Waste Processing, Food Processing Industry, Chemical and Biochemical Industry, for Pyrotechnics and Ceramics.
DOVE Ball Mills are designed to operate with various types of grinding media, including Ball Mills Balls. DOVE supply Steel Balls in Various sizes and specifications. Cast Iron steel Balls, Forged grinding steel balls, High Chrome cast steel bars, with hardness of 60-68 HRC. We also supply Grinding Cylpebs with surface hard ness of 60-68 HRC, and grinding Rod with surface hardness of 55-60 HRC.
DOVE Ball Mills are made of high grade cast and carbon steel for extra strength, long and trouble-free operations. The inner lining plate designed with high manganese steel for long life and minimum wear off.
DOVE Ball Mill can be integrated in a Complete Plant designed by DOVE Engineering Services, provided for our Clients application and supplied with all components of the plant for efficient processing, smooth operation and efficient integration with the balance of the Processing Plant.
DOVE Ball mills, also known as Grinding mill, Mining mill, Pebble mill, Ball & Pebble mill, is an important machinery in the mining and various other industries, which would require grinding different material.
They are highly efficient Grinding mill machines, designed for grinding applications, where fine material is required. DOVE Ball Mills are used in supplied and applicable for wet and dry grinding applications within the following branches of industries:
DOVE ball mills is a rotating horizontal cylinder that tumbles the material to grind with a certain media. The standard media that we use in our ball milling process are the steel grinding balls, however depending on the specific application, we can configure the grinding mill with different media.
DOVE supplies various types and sizes of Ball Mill Balls, including; Cast Iron steel Balls, Forged grinding steel balls, High Chrome cast steel bars, with surface hardness of 60-68 HRC. DOVE Ball Mills achieves size reduction by impact and attrition. When the cylinder rotates, the balls are dragged to almost the top of the shell, and from there, they fall unto the material, which lead to the material breaking due to the impact.
DOVE Ball Mills are used in hard rock mineral processing plants as an ore-dressing step to grind the rocks into fine powder size, liberating the mineral particles from the rocks. This will ensure that the ore is well prepared for the next stage of processing and optimize the recovery of the minerals.
DOVE ball mill is integrated and used in DOVE Portable and Semi-Stationary Hard Rock plants (Hard Rock processing plants) to efficiently grind the ore from primary deposit until the liberation size of valuable minerals is reached. DOVE ball mill is the key grinding equipment after material is crushed. It is used to grind and blend bulk material into powder form using different sized balls. The working principle is simple, impact and attrition size reduction take place as the ball drops from near the top of the rotating hollow cylindrical shell of the Ball Mill. The output materials will be feed to the processing and recovery machines.
DOVE Ball Mills are deigned for either wet or dry grinding of materials, in various models, and in accordance to the processing and the crushing plant design, to cater to the liberation size of the minerals and the hardness of the ore.
DOVE supplies two different kinds of ball mills Grate type, and Overfall type. The difference between the two type is according to their ways of discharging material, and the plant flow design specifications.
The Grinding Balls will grind the material into powder size of 20 to 75 micron. In mining operations, this will allow for the liberation of gold and other precious metals that are hosted by the rocks. Many types of grinding media are suitable for use in a ball mill, each material having its own specific properties, specification and advantages.
Media Size: The grinding media particles should be substantially larger than the largest pieces of final material after grinding. The smaller the media particles, the smaller the particle size of the final product.
Composition: Each ball mill application has different requirements. Some of these requirements are relates to the grinding media being in the finished product, while others are based on how the media will react with the material being milled. Therefor, grinding media selection plays major factor on the final milled product.
Contamination: In certain grinding mill process, low contamination is important, the grinding media may be selected for ease of separation from the finished product, for example steel dust produced from steel balls can be magnetically separated from non-ferrous products. An alternative to separation is to use media of the same material as the product being milled.
Corrosive:Certain type of media, such as steel balls, may react with corrosive materials. For this reason, stainless steel balls, or ceramic balls, and flint grinding media may each be used when corrosive substances are present during grinding.