mining chemicals and equipment

mining chemicals - international mining

mining chemicals - international mining

The mining Industry is facing many challenges today as the demand for minerals increases; the ore bodies available are of lower quality and the ores are often more complex / harder to process. Deposits are also getting more remote and more difficult to access.

Mining chemicals form a crucial part of the chain, and are absolutely fundamental to maximising recovery. The industry has both commodity and specialised chemicals but a major issue is the level of investment required by key players to develop new and more advanced solutions, and if this will even happen to the degree necessary if the mining industry is not willing to invest in their use versus cheaper but less effective and less environmentally friendly alternatives.

The market for mining chemicals supply ranges from focussed divisions of global companies such as Clariant, BASF (now owns former Cognis and CIBA chemicals businesses) and Cytec to more specialised dealers and suppliers of mining chemicals, but who also operate globally, such as SNF Flomin and Cheminova; and finally distributors, which are very numerous in local markets but may be sizeable in their own right in particular mining regions.

The global groups have the advantage of being able to provide strategically located offices in the major mining regions to provide the best possible allow local support, which may include manufacturing, testing laboratories and service personnel.

There are also the Chinese players manufacturing and exporting large volumes of mining chemicals from domestic facilities examples include xanthate producer Qingdao Ruchang Trading and Beijing Hengju , Chinas largest manufacturer of powder grade flocculants. However, most of the Chinese-made mining chemicals are not sold directly by manufacturers but almost exclusively through distributors.

As a result of the market division between lower cost product lines and more advanced chemistries, it is also true that some players have withdrawn from the market altogether, or have chosen to focus on particular areas. The downside to bulk low cost supply is a constantly changing environment at the primary feed stock supply sources, with a resulting lack of quality consistency in some cases.

Paul Gould, Global Head of Marketing and Applications, Mining Services at Clariant commented: We are seeing more Chinese manufactured products available globally, either through distributors or as repackaged / resold products through some of the established brands. Over the past few years, we have seen some Chinese reagent manufactures supply Building Block chemicals directly to customers under their own name. This trend will probably continue. This has affected the established suppliers, by causing them to withdraw from the manufacture and sale of some reagents. For example, both Cytec and Clariant have withdrawn from offering xanthates.

Colin Cumberbatch, Marketing Director at FloMin commented: Margins are very tight in mining reagents and over the years several large companies have stopped serving the market. Only a few suppliers offer the entire range of mining chemicals. Niche local suppliers are able to offer some chemicals in their respective countries and do quite well. Some chemistries cannot be economically produced by all players and as a result, some suppliers have unique advantages and are able to offer their products at substantial premiums. That said, new entrants in other chemicals for mining, especially from China, is still driving pricing and profitability lower. Chinese and Indian suppliers may also have a future advantage due to lower standards for chemical production.

In addition to the companies covered here in more detail, other significant players in mining chemicals supply include Akzo Nobel, Betachem, Shell Chemicals, Nasaco, Orica, Ashland Drew, Chevron Philips, Charles Tennant (Prospec), Senmin, Sasol, TallBennet, Mathiesen, Chemserve, Nalco, Dow Chemical and Cheminova and a range of other smaller suppliers.

Reagent chemicals are the key to the flotation process as they actively separate the desired mineral particles from the other minerals, create the bubbles that transport them, and control the overall pH of the tank at a range where the reagents work most effectively.

The main chemical groups divided by application are collectors, which act as surfactants in the flotation cell and adsorb to the surfaces of the valuable mineral particles and make them hydrophobic (water repellant) and frothers, which have the effect of producing stable bubbles in the cell for these hydrophobic particles to attach themselves to.

Other types of chemicals used include depressants, which form a polar chemical envelope around particles and depress the effect of any hydrophobic gangue minerals in the ore that would otherwise report with the froth along with the desired metallic mineral particles. There are also differential or reverseflotation systems, where depressants are used to hold down the desired mineral while floating the undesirable gangue.

Aside from flotation reagents, the industry includes the supply of extraction chemicals such as extractants and diluents; thickeners (flocculants and coagulants) used either as part of a process to thicken tailings for disposal or in the refining process; bulk acids (such as sulphuric acid) used in heap leaching; cyanide for gold processing; anti-scaling chemicals and dust suppressants amongst others.

By far the most widely used reagent collector compound is the xanthate family. Xanthate remains the main chemical used in sulphide flotation with volumes of over 100,000 t/y used and were first marketed in the US in 1928, with dithiophosphates following in 1927 and finally thionocarbamates in the 1950s by Dow. Predecessors of Clariant, Cytec and Dow were all involved in the development and sales of these pioneering chemicals in mining.

Some niche chemistries have been developed as an alternative to xanthates from Cytec and others, but they are still thought to account for less than 5% of the sulphide collector market. Colin Cumberbatch at FloMin comments: Xanthates still dominate the flotation chemicals market due to low cost and familiarity. In some areas they have performed better than other chemistries. Even though there are quality variations among suppliers, customers view them as commodities and bargain for lower prices. The difficulties in switching are compounded by the fact that engineering companies specify xanthates to be lab tested and later used in the mine. As such, budgets do not always allow for a wider range of reagent testing for optimal performance.

The counter argument to that for continuing the status quo is that as the ores become more difficult and even the process water becomes more impure, more tailored and innovative chemical solutions will be needed. Paul Gould at Clariant comments: There is an expression the quality of todays feed is yesterdays tailings. This coupled with the pressure to mine more deposits containing poly-metal ores, and the use of poor quality water sources presents huge challenges to the industry. Investment in new reagent innovations is the key to being able to liberate and achieve economically viable recovers in the future. There is a symbiotic relationship between the mining operations and the reagent manufactures and needs to be recognised. If the trend towards commoditisation of mining reagents continues, the product margins that allow for new research will dry-up. This is where the mining companies can help to support their own futures.

Cytec echoed the need for continued innovation. A spokesperson commented: The landscape of ores continues to change which requires constant innovation in technology for economical treatment. New advances have been introduced by Cytec in flocculant technology, sodalite scale inhibition, promoters and collectors and solvent extraction solutions. One recent development in particular that has gained a lot of market recognition for our company is FLOTATION MATRIX 100. This is a novel strategy for mineral flotation that combines an expert system, proprietary reagent blends and expertise and insights to generate consistent, quantifiable improvements in metallurgical, operational and financial performance.

Mine specific solutions are important, as it is by no means the case that each operation mining a similar ore type will use the same suite of chemicals. Ores differ widely globally and often in small, but significant ways. But this means there is no single mechanical and chemical configuration that could be classed as standard for one ore type globally. For example, Codelco Andina and Anglo American Los Bronces are on the same mineral belt and one opposite sides of the same mountain. They both are floating similar copper sulphides yet one of them uses sodium isopropyl xanthate (SIPX) and diethyl dithiophosphate (DTP) and the other is using O-isopropyl-N-ethyl thionocarbonate (IPETC) as a flotation collector.

Tailoring the right reagents for a specific ore and operation may only make a 0.5- 1% difference in metal recovery, but with high metal prices this difference makes it worth finding the right ones. Mining reagents cannot be treated as an ingredient in a finished product; core characteristics change which affect the composition of the feeds and may even impact the process water conditions. As a result, reagents can bring significant benefit to the performance of the mine or refinery when used wisely.

Nicole Richards, Global Marketing Director, Cytec told IM: Simple identification of the constituent minerals in the ores is usually not enough to guide a beneficiation scheme. Each mine is unique in the type of ore and challenges in treatment. Many times advanced methods for solving increasingly difficult problems from precious, base and industrial mineral operations are needed. Treatment programs and reagents will differ depending on many factors. Although there are no generic chemical solutions that can be used to treat a particular metal or minerals due to the complex interaction of chemical, physicalmechanical and operational factors and the different needs of the operations, there are reagents that act as a good starting point such as AEROPHINE for copper-gold ores, AERO XD5002 for flotation of copper ores containing iron sulphides under mild alkaline conditions, and AERO MAXGOLD 900 as a precious metal collector. But each mining operation requires a unique optimized chemical solution.

Colin Cumberbatch added: Chemical reagents are specific to each type of ore even within a mine site. One customer with two operating mills uses xanthates while the other uses dithiophosphates (DTPs). Some metallurgists may also have preference to oily collectors versus water soluble ones. There may be troublesome impurities present such as clays, which require special reagents. For each ore type mineralogy and geology FloMin offers several reagents based on prior success. It is difficult to predict which will meet the customers goals. Other operating factors such as ore changes, grinding, pH, addition points, and overall plant design contribute to performance.

The market is already very competitive. Logistics are a key driver in the prices of mining chemicals and it often accounts for 20% or more of the overall cost especially for overseas shipments. The suppliers have to constantly evaluate all transportation possibilities that provide the best economy of scale but that also deliver products in a manner that customers expect and on time.

Xanthates are supplied as powders and pellets in plywood covered bulk bags or drums, but for environmental and safety reasons, pellets are preferred. Dithiophosphates are supplied as liquids, while thionocarbamates as liquid and oxide collectors as liquids or pastes. Frothers are all supplied as liquids.

Paul Gould at Clariant comments: As I explain to people who are not familiar with the mining business, our customers are often not only located at the end of the earth, but down a hole at the end of the earth. At Clariant we understand that you cannot run a mineral processing operation without security of supply and so, Clariant Mining Solutions is a global company with strategically located recourses in the major mining regions to the best possible allow local support. Local infrastructure includes manufacturing, testing laboratories and service personnel. The ability to manage inventories in a disciplined way as well as providing additional or different products a short notice due to unexpected demands helps customers maintain high operational uptime.

Nicole Richards at Cytec told IM: Transportation and logistics in the mining industry are certainly a key factor in ensuring reliable delivery and service for any supplier. Each year presents different challenges including availability, costs and reliability of transportation carriers particularly to remote and undeveloped geographies. It is important to understand and manage each situation to ensure quality service is not compromised.

Colin Cumberbatch at FloMin adds: Logistics are very important. Most of the mines are located in remote regions of continents and most mining reagents like xanthates are hazardous cargo. More shipping lines are making it difficult to ship xanthates by sea. Customers are also requesting pricing based on delivery to the minesite including warehousing. This is also a major challenge for global suppliers.

In the formulation of chemicals solutions, minimisation of environmental impact is also always taken into account. Over the last few years, requests for more environmentally sensitive reagents have become more common from the mining companies. This is change and is ahead of government regulations. Projects have even held-up due specifically to environmental concerns.

Also, while ores are becoming increasingly difficult to treat, environmental regulations are becoming more stringent. Water use (or more importantly water conservation) is becoming a major concern. The industry is looking to the mining chemical manufacturers to develop speciality reagents that can meet their needs in treating difficult ores and to allow them to address the environmental and resource challenges.

Innovative chemistries are being introduced that allow regulations on waste water discharge and emission to be met and are cost effective from a total treatment cost perspective. Just as increasing metal prices now make the extraction of dead deposits more economic, the industry foresees a similar impact from new chemistries enabling effective operation under new environmental regulations.

Clariant has a long history of providing collectors (Flotinor, Hostaflot), depressants (Flotol) and frothers (Flotanol, Montanol) for the mining flotation process. It also supplies the Arkomon range of products for dust control.

The company describes its expertise as focussing on meeting the specific needs of customers wherever they are located, which includes iron ore in Brazil, sulphide copper ores in Chile and Peru, tin in Australia and rare earths in North America. However, whatever the ore demands, Clariant states that it is able to provide local support and expertise wherever the customer is located.

The mining business is centred on Clariant Mining Solutions, headquartered in Woodlands, Texas.. This location only deals with mining and does not support other businesses. Clariant Mining Solutions was founded in 1980 and is a business unit of Clariant AG; which is the direct descendant of the multinational chemical companies, Sandoz and Hoechst. Paul Gould comments: While Clariant Mining Solutions is global in reach, it has structured its resources to enable them to focus on local customer needs through strategically located centres of excellence, where Clariant provides regional development, service and manufacturing.

With the more complex requirements of polymetallic ores, rare earths and lower grade deposits, Clariant states that it is continuing to develop chemistries to meet these challenges. This includes expand its operational reach, broadening and deepening its product portfolio and enhancing technical and service offerings through the addition of skilled and knowledgeable personnel who are experts in their fields. Under the byline, Performance and Value Delivered, Clariant Mining Chemicals states that it now seeks to partner with its customers to help them meet the challenges of harder to process and lower quality ores through investment and innovation.

Gould is very upbeat on the current market. He comments: Before joining Clariant, I held mining marketing roles for both Nalco and Cytec, and right now the mining industry is the hottest it has ever been. Chemical companies who formerly had no or little mining products are adding flotation and/or solvent extraction reagents to their portfolio the hope of cashing in. However, the familiar family values of mining reagents remain as important to our customers as they have ever been. These are performance, value, service and security of supply.

Cytec Industries is a global leader in specialty mining reagents and has been supplying the mining industry for nearly 100 years. Nicole Richards comments: Cytec has been redefining the boundaries of mineral processing, enabling our customers to achieve optimal productivity while meeting complex economic, environmental and metallurgical challenges. Our expertise is in three main areas of mining: aluminum processing, mineral processing and solvent extraction. In our main products we are the global leader both in terms of application expertise and market share with on-site technical assistance provided on a global basis. Our customers expect and receive application support as an included element of the Cytec offering.

In minerals processing, Cytec offers specialty collectors, frothers and modifiers, dewatering agents and antiscalants. Other proprietary tools include diagnostic software, statistical process analysis and design, as well as specifically developed laboratory and field tests; many of which have become industry standards.

Solvent extraction of metals remains a core part of Cytecs business, and the company provides highly selective reagents primarily for copper, cobalt, nickel and several rare metals. These extractants provide plants with enhanced kinetics, productivity and throughput. Cytec currently has two distinct product families in this area: organophosphine based-extractants offered under the trademark CYANEX, and its hydroxyoxime extractants offered under the trademark ACORGA.

One area of progress has been in xanthate alternatives. Richards comments: There are limitations with the use of xanthates and other technologies are now being used within the industry. In addition, there are safety, health, and environmental issues related to the usage of xanthates; they are combustible, self-ignite /explode, and release toxic gases such as CS2, COS, etc during storage, shipment and usage. Based on a desire to provide the industry with sustainable solutions , Cytec has developed the XR Series of xanthate replacement products that exhibit a metallurgical profile very similar to that of the xanthates while mitigating the Safety Health and Environmental (SHE) concerns. In addition, this new series of products is cost competitive compared to xanthates. Solving customer needs with novel technology does not necessarily mean higher cost reagents. Cytec focuses on solving our customer needs while offering an attractive value proposition.

Based in Baytown, Texas, FloMin produces a complete range of xanthates (it is the second largest exporter from China), liquid collectors, promoters and depressants for the mining industry. It maintains an inventory of a wide range of frothers from MIBCs to glycol ethers to specialty alcohol blends. For solvent extraction the company offers several modified aldoximes, DEHPA and Ionquest 290 extractants. Industrial minerals markets are supplied with fatty acids, petroleum sulfonates, surfactants, dust control agents, defoamers, and dewatering aids. The parent company SNF is the largest producer of water soluble polymers worldwide including flocculants, dispersants and coagulants as well as feed equipment.

In terms of new product development at the group Colin Cumberbatch comments: There have not been many entirely new chemistries in the market, though there are variations to existing thionocarbamates, dithiophosphates and dithiocarbamates. FloMin has employed some novel approaches to blending existing chemistries have yielded some very impressive products. A large impact has been made by customising frothers rather than using standard MIBC or glycol ethers. Also, there is an emphasis on placing alternative collectors inside of xanthate pellets. We expect to see growth in this area.

The company also stated that it is benefitting from a more broad approach by mining chemical customers: More customers are open to test reagents from multiple suppliers. In the past it was perceived that only a handful of companies were the only credible global supplier of specialty promoters.

ArrMaz Custom Chemicals is an interesting player, as it supplies mining chemicals mainly for the phosphate mining and industrial mineral sectors. This includes anionic collectors, cationic collectors, frothers, pH modifiers, defoamers, polymers, rheology modifiers and depressants. In this niche, it is the market-leader. These industrial minerals also require customised chemical suite solutions. Guoxin Wang, Director, Flotation Technology, at ArrMaz comments: All our flotation collectors are custom-made based on the ore-body characteristics including geological formation and mineralogical composition. For example for phosphate ores, Florida phosphate is sedimentary with silica and clay as main gangue minerals, for which we use anionic collector to float the phosphate, then use cationic collector to further lower the silica content from the rougher concentrate. Even for the phosphate mines in central Florida, we have to formulate the collectors specifically to meet the needs due to difference of ore bodies. For some phosphate deposits in China, the main gangue mineral is dolomite with minor silicate, for which reverse-flotation scheme is applied. We use custom-made anionic collector to float carbonate minerals out to lower MgO and concentrate the P2O5. For our craft, it truly is orebody specific, which is also affected by processing scheme at each location which can also vary significantly.

The group states that some phosphate flotation customers are looking for alternative products from ArrMaz from their traditional suppliers due to short supply and pricing. In terms of new development, the company states that it is constantly working on maximising its reagent performance and cost. For example, it has developed a series of carbonate flotation collectors which can be used extensively for carbonate minerals flotation from phosphate ores worldwide. ArrMaz has also discovered a surfactant to strengthen anionic collectors for silica sand flotation.

Unlike other mining chemical markets, so far China has not supplied any chemicals similar to those ArrMaz specialises in for phosphates and industrial minerals out of China. Conversely, the group is trying to enter China market to meet Chinas needs for chemical solutions in these non-metallic minerals areas. ArrMaz is also introducing its flotation collectors to other industrial minerals industries such as calcium carbonate to help raise customer product standards.

BASFs Mining Solutions business unit operates globally offering a diverse range of mineral processing chemicals and has grown significantly with the acquisitions of Cognis in 2010 and CIBA in 2008. It describes its current strengths as lying in solid liquid separation and solvent extraction; however, the group also has reagents that support other mineral processing applications, such as flotation, grinding and agglomeration.

Tim Foerschler, Communications Director for Fuel and Lubricant Solutions, Oilfield and Mining Chemicals at BASF comments: Within this industry over the last few years, there has been an increased focus by customers to maximise recovery of water/valuable minerals utilising reagents to improve process efficiencies and minimise waste. BASF as the worlds leading chemical company has therefore aligned its offering to meet the challenges faced by the industry through performance improvements of existing offerings and via new innovative and sustainable solutions. Improvements in this respect potentially yield massive savings to mine operators, both in operational costs and reduced capital investment requirements.

BASF also recognises that the mining industry faces many challenges and issues relating to the use of water and the impact of exploration, extraction and residue management on the environment. In order to address this, the company has developed the Rheomax DR (Density & Rheology) range of advanced flocculants. In addition, Rheomax ETD (Enhanced Tailings Disposal) is a patented, novel method of tailings management in which technology is used to change and control the structure and drainage properties of mineral processing residues.

In terms of the commodity versus specialised debate, Foerschler tells IM: Commodity offerings are generally considered to be low priced due to the large volumes and high market saturation of suppliers. Specialty offerings, particularly those that are linked back to crude oil as a key raw material are usually confined to a limited number of specialist producers. For specialty chemicals no new suppliers have really developed in recent years. It is felt this is due to customers requiring a high level of process/application service support coupled with global reach, which new entrants find difficult to meet. He adds: Many chemicals that are used in the industry can be considered to be mature and whilst they may still be defined as fit for purpose they are not necessarily the most effective offering from either an environmental or performance perspective. As a leading chemical supplier BASF continue to invest in innovation and sustainable solutions to solve the industries issues.

Finally, as stated, water is becoming an increasing important resource, and management of water resources (covered in-depth in IMs forthcomingJuly issue). Mining and minerals processing companies are turning to advanced water reuse and conservation solutions as they need reliable supplies of clean water for extracting and processing ore and other materials. GE is one group that is able to offer a complete set of chemical and equipment solutions to help companies improve how they manage their water resources for mining and mineral processing activities. This includes integrated discharge water management/reuse solutions for water recovery, treatment and recycling; and dust control technologies including underground ramp, mine service, haul road and materials handling treatments that are engineered to help reduce water usage and operating costs.

A range of chemical treatment solutions are offered to control fugitive dust emissions while achieving water reductions of up to 90%. GEs dust control approach combines water with an environmentally friendly chemical treatment. Once the product is applied, it renders road surfaces hard, dust-free and non-slippery for an extended period. GE has a mobile water treatment fleet the largest in the world which meets the demand for on-site water treatment through emergency and short-term leases and long-term outsourcing. A complete range of membrane and filtration technologies also provides influent treatment for a diverse variety of non-potable water sources.

The group also offers Zero Liquid Discharge (ZLD) systems use advanced evaporation and crystallisation technologies that eliminate wastewater discharge and enable recovery of valuable by-products. Other GE technologies enable heavy metal removal to improve wastewater quality and water treatment systems to provide deposit and corrosion control in mining process systems. Distinct chemical solutions include boiler, cooling and industrial process chemicals -and monitoring to improve plant productivity while safeguarding assets to ensure environmental protection.

GE offers water and process technology solutions to help operators address calcium carbonate fouling and various scaling issues associated with the cyanide leach process, which requires vast amounts of water. Fouling restricts flow in piping, pumps and in distribution emitters. It also causes scaling on the activated carbon and all system hardware. In the gold leach process, calcium in the solution may be the result of calcium ions already present in the water or from the addition of lime for pH adjustment. Carbonate can be contributed by freshwater addition or by adsorption from the air. Increasing the pH, temperature, conductivity, alkalinity, or any ionic species concentration, will increase the scaling potential by moving the equation equilibrium to the right. Suspended solids in the system will also promote calcium carbonate precipitation. Not all system fouling is attributed to scale deposits. It may be the result of mud transported into the system, sludge pumped from the ponds, carbon fines or other foreign debris. Also, not all scales are composed of calcium carbonate; however, in the cyanide leach circuit, a very large percentage of scale is calcium carbonate. Scale that is made up of other species usually will not deposit if calcium carbonate is controlled. An examination of the deposit will reveal which type of fouling is present. Controlling the negative effects of scale formation requires strict management control of operations. Understanding that most gold leach circuits are carbonate-limited more often than calcium-limited also helps. When adding a reagent that increases the carbonate or bicarbonate concentration or elevates pH, it must be done at a location that will permit harmless precipitation to occur.

South Africa-based Axis House supplies a full range of mining reagents to mineral processors. The range includes flotation reagents such as collectors, depressants, froth modifiers and flocculants; leaching reagents would include pH modifiers, acids, flocculants, solvent extractants and diluents. Axis House is known for the pioneering work that has been done in its in-house laboratories in Cape Town and Sydney developing specifically tailor-made oxide mineral flotation agents, the codevelopment of a low flash-point diluent, as well as being involved in the development of higher performing precipitation agents in copper and cobalt circuits.

In 2008, Axis House acquired the chemical business from ASX-listed Ausmelt. This broadened the companys oxide flotation offering of sulphidisation reagents (and their successful application); modified fatty acids and amines (Rinkalore range) to also include the Ausmelt range of hydroxamate oxide collectors. This move enabled Axis to offer a full range of oxide flotation reagents. Trevor McLean-Anderson, Managing Director commented: Owning the technology also allows us to improve it, something we do in conjunction with our clients and AECI group company Industrial Oleochemical Products.

In the flotation of oxides it used to be thought that sulphidisation was the only commercial route available to plant metallurgists, but Axis House has been supplying modified fatty acids and amines for this purpose since its inception and Ausmelt flotation reagents have now been used commercially on more than eight plants internationally. IM

mining, chemicals & landscape material processing equipment

mining, chemicals & landscape material processing equipment

With our abilities in separation, sorting, blending, material handling and packaging, we offer innovative and leading edge solutions to a variety of industries. Whether optically sorting table salt, blending fertilizers for the finest golf courses or packaging and palletizing minerals, landscape materials or cement, we make it our business to deliver quality.

When these disciplines are combined with our in-house expertise in design, engineering, construction and fabrication, we offer much more than just components when your needs require them. That is the Bratney difference and we work hard to uphold the tradition, history reputation we have come to be known for since our beginning in 1964.

gold mining equipment

gold mining equipment

911MPE hassmall gold mining equipment for sale andmore specifically mineral processing equipment. Our equipment is best used in small scale extractive metallurgyoperations operated by small miners or hobbyist prospectors and mining fanatics. 911MPE offers gold mining equipment as well as processing equipment applicable to most any base metals: copper, lead, zinc, nickel, tin, tungsten and more. For the relatively small size of equipment offered, sample preparation and metallurgical laboratories can economically buy good alternatives to the usually unaffordable equipment for sale in the classic market place.

911MPE has for target market what mining professionals consider the pilot-plant scale mining operation or artisanal mining operations with a focus around under 500TPD. Metals you can extract include: gold, silver or other of the precious group as well as the classic base metals; copper, lead, zinc, nickel, molybdenum. Much of our ultra-small scale equipment allows you to process from just a few kilo (pounds) per day and work on your passion for a small budget.

You can buy from us mineral processing equipment starting from crushing, grinding, classification, dredging, gravity separation, flotation, pumps, water treatment and smelting. A line of ovens, furnaces and laboratory equipment is also available.

Making a complete list of gold mining equipment starts with defining the type of gold mining you are doing and the budget you have at your disposal. The type of mining relates to hard rock,eluvial, or placer; alluvial deposits. The capital budget you have to invest in buying your equipment with dictate the scale at which you want to mine and influence the long-term operating costs of your mining operation.

Since most of the information online provides lists of gold mining equipment for amateur level mining with equipment like: gold pans, metal detectors, mini sluice box, blue bowl, geologist rock pick, soil scoop, hand screens/classifiers. The items listed just now fall closer to gold prospecting tools and equipment than actual mining.

I will present here what I consider are major equipment lists for 3 types of mining operations. Remember now, a metallurgist is writing. This will not be flawless and since my speciality is process equipment, that is mostly what will be discussed.

Some amateur level gold prospecting equipment such as metal detectors are often classified as mining equipment by small miners/prospectors operating as a hobby. These items include but are not limited to:

home - protea mining chemicals

home - protea mining chemicals

Commodity feeds Gold USD/oz0.22% 1795.79 Platinum USD/oz-1.18% 1088.95 Copper USD/tonne1.02% 9528.00 Cobalt USD/tonne-0.01% 50480.00 End of day prices, 6 Jul 2021Source: Profile Media Exchange rates ZAR/USD -0.46% 14.31 ZAR/EURO -0.50% 16.88 Prices 15 minutes delayed

Protea Mining Chemicals is a member of the Omnia Group. The Omnia Group is a JSE listed diversified provider of specialised chemical products and services used in the mining, agriculture and chemicals sectors. Omnia has been in business for more than 60 years and has it's head office in Johannesburg, South Africa.

aeci mining chemicals | suppliers & manufacturers of mining chemicals in south africa

aeci mining chemicals | suppliers & manufacturers of mining chemicals in south africa

As Africas leader in the global mining industry, AECI Mining Chemicals develops, manufactures, supplies and supports a wide range of polymeric emulsifier and coating technologies for explosives and fertilizer value add, reagents for ore beneficiation processes that involve flotation technologies, as well as solutions for solid-liquid separation and tailings management.

cleaning products for the mining industry | chemicals & washers

cleaning products for the mining industry | chemicals & washers

Because of the unique composition of our cleaning products, they do not form an emulsion with grease and oilsbut lifts and releases them at the surface for easy removal, and complete oil water separation. Thisnot only saves onwaste costs, but enablesre-use of the water on site as a dust suppressant, saving on water procurement costs. The hydrocarbon level that is satisfactory for re using water as a dust suppressant is 15ppm (parts per million), however, our customers areachieving hydrocarbon levels as low as0.75ppm! An almost perfect separation.

The Problem The water supply system at a remote Australian mine was heavily scaled, causing pipe blockages and resulting in a drop in performance. There is a large pipe network for supplying potable water throughout the mine site and the options were to excavate, remove and replace the pipework or find an alternative way to [...] READ MORE

Compared to previously used degreasing products, Triple7 All Purpose Degreaser works extremely well with oil/water separators at Australian sites, providing the automotive rental & maintenance company with significant cost savings. READ MORE

Compared to previously used degreasing products, Triple7 All Purpose Degreaser works extremely well with oil/water separators at Australian sites, providing the automotive rental & maintenance company with significant cost savings.

An uranium mine was looking for a safe and cost effective alternative to a wet sand blasting method, to remove low radioactive surface contamination which does not pass the transport code, from metal surfaces, with minimal capital expenditure. READ MORE

An uranium mine was looking for a safe and cost effective alternative to a wet sand blasting method, to remove low radioactive surface contamination which does not pass the transport code, from metal surfaces, with minimal capital expenditure.

Using conventional chemicals and degreasers in industrial wash bays creates large volumes of oily waste water that cannot be released down sewers or into water ways. Strict government regulations require the safe removal and disposal of oily waste water from wash bays. This can be very expensive. READ MORE

Using conventional chemicals and degreasers in industrial wash bays creates large volumes of oily waste water that cannot be released down sewers or into water ways. Strict government regulations require the safe removal and disposal of oily waste water from wash bays. This can be very expensive.

mining applications - miller-stephenson chemicals

mining applications - miller-stephenson chemicals

Krytox performance lubricants are generally applied in critical nature applications with temperatures reaching extremes for conventional lubricants. They are expected to be durable in the most aggressive environments and are now often considered an integral part for lubricating Mining Equipment. Where failure of mining equipment is not an option, whether because of durability, warranty, safety, loss of productivity or down time, Krytox is the lubricant of choice in a wide range of mining applications.

XHT-S and XHT-SX are special high temperature greases with low oil evaporation that provide exceptional long bearing life and serve as a rust inhibitor. Compatible with most elastomers, plastics and metals. Krytox greases are 100% nonflammable, chemically and biologically inert making them ideal for mining applications.

XHT-AC and XHT-ACX is a two product grease series that are designed to tolerate extreme high temperature with low oil evaporation that provide anti-wear and rusting protection. Krytox XHT-AC greases are compatible with most elastomers, plastics and metals. Krytox greases are 100% nonflammable, oxygen-compatible, and chemically inert making them ideal for mining applications.

XHT-BD, XHT-BDX and XHT-BDZ is a series of greases thickened with a non-melting additive that can tolerate extreme high temperature with low oil evaporation. Krytox XHT-BD greases are compatible with most elastomers, metals and plastics while being 100% nonflammable and chemically inert. Making these greases ideal for mining applications.

A series of extreme pressure, heavy-duty greases that contain a molybdenum disulfide additive for reducing wear on highly loaded gears and bearings that are typically utilized in the Mining Industry. Krytox greases are used for high loading or slow speeds while having a high load-carrying capability making them and ideal lubricant for mining applications.

Miller-Stephensons proprietary aerosol products offer exceptional high-quality cleaning solutions that are specially formulated with no ODC (ozone-depleting chemicals), no ammonia and are 100% nonflammable with ultra-low odor and safe to use on dials, windshields, gauges, and office windows.

A high-quality cleaner that is especially suitable for non-streak cleaning of glass. Excellent for use on dials, gauges and oscilloscopes. Also recommended for excavator windows . Contains no ammonia. No ODC (ozone depleting chemicals). NSN 7930-01-064-5179 (Aerosol).

Aero Duster MS-222 series utilizes an ultra-pure propellant which is used to remove dust from sensitive electronics and other critical mining equipment. It is nonflammable, odorless, non-conductive, and leaves no residue or traces of contaminants.

Since 1955 Miller-Stephenson has worked diligently with customers engineers and technicians to optimize formulations for specific manufacturing needs. We can provide custom formulations for mold releases, solvents, lubricants, epoxies, and conformal coatings. Miller-Stephenson offer a dedicated team of engineering specialist and formulation chemists who will work closely with you to help identify your specific manufacturing requirements and provide an optimal solution for your needs.

Mining is a constantly evolving industry, sometimes the product that is needed, simply does not exist. Miller-Stephensons dynamic engineering and research teams can quickly address your application and develop a unique solution. Our experts enjoy the challenge of customizing formulations so that every customers manufacturing requirements can be met.

Related Equipments