For many years of accumulation in experiences and improvement on services and machinery, HongXing Mining machinery now is able to offer you the most efficient plant with minimum initial investment and operational cost.
Separation of desired minerals from unwanted minerals by chemicals, common is froth flotation. The core machine is a flotation machine Applied material: feldspar, bauxite, manganese ore, phosphate ore, etc
Gravity beneficiation is separating mineral according to the specific gravity of the material. Spiral chute, spiral classifier and shaking table are usually used. Applied material: gold ore, manganese ore, alluvial gold.
Maison Malaiti, a customer from Zambia, consulted us about a 30 tons per hour gold ore beneficiation plant. He said that the content of gold in the rocks as picked on random is 1.5 ppm. Because he is a greenhand in mining, our engineer recommended him the PE-250400 Jaw crusher, 18306400 Ball mill, 2FG-15 Spiral classifier, JJF-20 Flotation Machine, Spiral chute,etc.
We compared many companies and their machines are reasonably priced. Within a month, my project was designed, installed, guided, and run. I am very satisfied with their pre-sales, installation and after-sales services.
At the end of last year, a Sudanese customer consulted us about a beneficiation plant for processing gold tailing. He wants to get more gold through the Gold CIL Plant. His tailing concentration is 5%. According to this parameter, our engineer customized a dedicated Gold CIL Plant for him.
I think their machines have reached the level I want and I will continue to work with them. This year I will make partnership with owner of tailing from any African country as we are going to treated it by new method to (CIL) get more gold.
Rio Tinto Iron Ore's low-grade ore beneficiation plant in the Pilbara was commissioned in 1979. Initial engineering, design, and construction were undertaken by KBR (Kellogg Brown and Root) and Minenco (RTIO information provided to author, 2013). The plant separates closed-circuit crushed ROM into 31.5+6.3mm and 6.3+0.5mm streams for feeding their DMS drum and cyclone plants, respectively (Figure 10.5).
To evaluate an iron ore resource, develop processing routines for iron ore beneficiation, and understand the behavior of the ore during such processing, extensive mineralogical characterizations are required. For calculating mineral associations, mineral liberation, grain size and porosity distribution, and other textural data, reliable imaging techniques are required.
Automated optical image analysis (OIA) is a relatively cheap, robust, and objective method for mineral and textural characterization of iron ores and sinters. OIA allows reliable and consistent identification of different iron oxide and oxyhydroxide minerals, e.g., hematite, kenomagnetite, hydrohematite, and vitreous and ochreous goethite, and many gangue minerals in iron ore and different ferrites and silicates in iron ore sinter. OIA also enables a distinction to be made between forms of the same mineral with differing degrees of oxidation or hydration.
To reliably identify particles and minerals during OIA, a set of comprehensive procedures should be automatically applied to each processed image. Generally, this includes next stages: image improvement, particle and mineral identification, particle separation, porosity identification, identification of unidentified areas, and correction of mineral maps. This is followed by automated measurements of final mineral maps and statistical processing of results.
High resolution, imaging speed, and comprehensive image analysis techniques of modern OIA systems have made it possible to significantly reduce the cost and subjectivity of iron ore and sinter characterization with a simultaneous increase in the accuracy of mineral and textural identification.
World demand for iron ores to meet the ever-increasing requirements of iron and steel industries has made it imperative to utilize all available resources including lean grade ores, mined wastes, processed tailings, and blue dust fines accumulated at mine sites. Most of such resources exist as finer particles, while lean-grade ores require fine grinding for liberation of associated gangue minerals. Hematite is the most abundant iron ore mineral present in available resources while the major impurities include silica, alumina, calcite, clay matter, and phosphorus. Conventional beneficiation processes such as flotation, electrostatic and magnetic separation, gravity methods and flocculationdispersion using chemical reagents to treat the finer iron ore resources often prove to be inefficient, energy-intensive, costly, and environmentally-toxic.
Why microbially mediated iron ore beneficiation? Any microbially induced beneficiation process will prove to be cost-effective, energy-efficient, and environment-friendly compared to chemical alternatives which use toxic chemicals. Microorganisms which find use in beneficiation are indigenously present in iron ore deposits, tailing dams, and processed wastes. Mining organisms inhabiting iron ore deposits are implicated in biomineralization processes such as hematite, magnetite, and goethite formation as well as their oxidationreduction, dissolution, and precipitation in mining environments. Similarly, gangue minerals such as silica, silicates, clays, calcite, alumina, and phosphates are often biogenically entrapped and encrusted in the hematitemagnetite matrix.
Autotrophic, heterotrophic, aerobic, and anaerobic microorganisms such as Acidithiobacillus spp., Bacillus spp., Pseudomonas, Paenibacillus spp., anaerobes such as SRB, yeasts such as Saccharomyces sp., and fungal species inhabit iron ore mineralization sites. Many such organisms find use in beneficiation processes because they are capable of bringing about surface chemical changes on minerals. Microbial cells and metabolic products such as polysaccharides, proteins, organic and inorganic acids can be used as reagents in mineral flotation and flocculation.
Isolation, characterization, and testing the usefulness of mining microorganisms inhabiting iron ore deposits hold the key towards development of suitable biotechnological processes for iron ore beneficiation. Because many microorganisms inhabit iron ore deposits contributing to biogenesis and biomineralization, there is no reason why one cannot isolate and use them to bring about useful mineral processing functions. Though innumerable microorganisms are known to inhabit iron ore deposits, only a few of them have been identified as of now and among them, still only a few have been tested for possible iron ore beneficiation application.
Costly and toxic chemicals used in conventional beneficiation processes can be replaced by biodegradable, mineral-specific, biologically derived reagents such as exopolysaccharides, bioproteins, organic acids, biodepressants, and bioflocculants.
Iron ore beneficiation can be brought about through three approaches, namely, selective dissolution, microbially induced flotation, and selective flocculationdispersion. The bioprocesses are specially suited to treat fines, slimes, and waste tailings.
Potential applications includei.Dephosphorizationii.Desulfurizationiii.Desiliconizationiv.Alumina and clay removalv.Biodegradation of toxic mill effluentsvi.Clarification, water harvesting from tailing poundsvii.Recovery of iron and associated valuable minerals from accumulated ore fines and processed tailings.
For D. desulfuricans, an anaerobe, as the cell count increases, sulfate concentration decreases, because the organism reduces sulfate to sulfide to derive energy. During the log phase, the decrease in sulfate concentration corresponding to exponential bacterial growth was significant.
The growth of bacterial cells was monitored in the presence and absence of minerals such as hematite and quartz. When similar cell growth was attained in the presence of minerals as in control, growth adaptation to the minerals was considered achieved. Adsorption density of SRB cells grown under different conditions on hematite and quartz surfaces was found to be different. Cells grown in the presence of hematite exhibited higher adsorption density on hematite, whereas those grown in the presence of quartz attached profusely to quartz surfaces. Cells grown in the absence of minerals exhibited higher surface affinity towards hematite and rendered it more hydrophilic . Extracellular proteins and ECP secreted by D. desulfuricans in the presence and absence of minerals are shown in Table 10.19.
Extracellular proteins secreted by quartz-grown D. desulfuricans were the highest, while the secretion of ECP was found to be higher in case of hematite-grown cells. Bacterial growth in the presence of quartz promoted secretion of higher amounts of proteins, while the presence of hematite resulted in the generation of significant amounts of exopolysaccharides. Negatively charged quartz surfaces exhibit strong surface affinity towards positively charged amino group containing proteinaceous compounds, while hematite exhibited strong affinity towards exopolysaccharides at neutral to mildly alkaline pH conditions.
Protein profiles of bacterial cells and metabolites exposed to minerals were compared with conventionally grown cells and their metabolites. Mineral-specific protein bands of molecular weights 105, 36.5, and 25kDa were observed only in case of quartz-grown bacterial cells because they were absent in conventionally grown and hematite-adapted cells and metabolites. Secretion of higher amounts of mineral-specific stress proteins by bacterial cells was promoted if grown and adapted in the presence of quartz mineral .
Amount of polysaccharides present on hematite-adapted SRB cell walls as well as metabolites were significantly higher compared to bacterial growth in the presence of quartz. SRB cells adapted to hematite become more hydrophilic than those adapted to quartz, which were rendered more hydrophobic due to enhanced secretion and adsorption of proteins. Similarly, hematite surfaces were rendered hydrophilic due to enhanced polysaccharide adsorption, while quartz became hydrophobic due to higher protein adsorption.
Significant surface chemical changes brought about on quartz and hematite due to bacterial interaction can be made use of in their selective separation through bioflotation as illustrated in Table 10.20.
In the absence of bacterial interaction, no significant flotation of quartz and hematite would be possible. Percent weight flotation of quartz was about 45% and 35% after interaction with unadapted bacterial cells and metabolite, respectively, while it increased to about 75% and 84% on interaction with quartz-adapted cells and metabolite, respectively. Percent weight flotation of hematite was about 8% and 11% on interaction with unadapted bacterial cells and metabolite, respectively. After interaction with hematite and quartz-adapted bacterial metabolite, about 15% of hematite could be floated. Flotation recovery of hematite decreased to 2% with hematite-grown cells. Such a hydrophilic surface character of hematite (unlike quartz) is due to its high affinity towards polysaccharides.
Selective separation of quartz from a binary mixture of quartz and hematite was also studied after interaction with bacterial cells and metabolite. Interaction with unadapted bacterial cells and metabolite resulted in only 10% and 9% flotation recovery for hematite. After interaction with quartz-adapted bacterial cells and metabolite, the percent flotation of quartz from the mixture was about 76% and 81%, respectively. The above results clearly establish that efficient separation of silica from hematite could be achieved through selective flotation after interaction with cells and metabolites of an SRB (D. desulfuricans). However, prior bacterial adaptation to the respective minerals (especially quartz) is essential to bring about efficient separation. Addition of starving quantities of silica collector would be beneficial in enhancing quartz floatability and depression of hematite.
Uncertain parameters are assumed to behave like fuzzy numbers and FEVM approach has been applied to an industrial case study of ore beneficiation process. A modified form of NSGA II, FENSGA-II has been utilized to solve the deterministic equivalent of the multi-objective optimization problem under uncertainty. Results of credibility, possibility and necessity based FEVM are presented and thoroughly analyzed. PO solutions obtained from possibility based FEVM have the optimistic attitude. Similarly, PO solutions obtained from necessity based FEVM have the pessimistic attitude. This gives a key to decision maker to select any point based on existing risk appetite.
Screening is an important step for dry beneficiation of iron ore. Crushing and screening is typically the first step of iron ore beneficiation processes. In most ores, including iron ore, valuable minerals are usually intergrown with gangue minerals, so the minerals need to be separated in order to be liberated. This screening is an essential step prior to their separation into ore product and waste rock. Secondary crushing and screening can result in further classification and grading of iron ore. The fines fraction is usually of lower grade compared with lump ore.
Hematite and magnetite are the most prominent iron ores. Most of the high-grade hematite iron ores (direct shipping ore (DSO)) are subjected to simple dry processes of beneficiation to meet size requirements. This involves multistage crushing and screening to obtain lump (31.5+6.3mm) and fines (approximately 6.3mm) products. Low-grade hematite ores need to be upgraded to achieve the required iron content, which involves more complicated ore beneficiation processes. The level of comminution required for the low-grade hematite ore is similar to high-grade ores to deliver the same products, lumps and fines. In most cases, the fines product requires additional separation/desliming stages to remove fines containing a high level of clay and other waste minerals.
Although most of the current world iron ore production is represented by hematite ores, the magnetite reserves are significant and the growing demand for steel has opened the way for many new magnetite deposits to be developed. Compared to direct shipping hematite ores mined from the upper regolith, magnetite deposits require significant and different beneficiation, which typically involves grinding of the run-of-mine ore to a particle size where magnetite is liberated from its silicate matrix. The amount of energy required to produce a magnetite product suitable for sale as pellet plant feed is an order of magnitude higher than an equivalent direct shipping lump and fines hematite project.
Due to the depleting reserves of DSO ores and increasing development of low-grade hematite and magnetite deposits, the need for iron ore beneficiation is increasing. Even the DSO ores are requiring a higher level of processing as the depth of existing mines is increasing (below water table) where ores are wet and more sticky, which creates challenges for conventional crushing and screening.
This chapter reviews the current state of iron ore comminution and classification technologies. Firstly, it discusses the most commonly used crushing and screening technologies, including most common flowsheets and a short review of new trends. This is followed by review of comminution circuits and equipment for magnetite ores including most typical flowsheets and advances in comminution technology.
Variations in iron ores can be traced and mapped using cluster analysis and XRD quantification. Paine et al. (2012) evaluated a large number of iron ore samples from an iron ore deposit. Using cluster analysis and mineral quantification, the ores could be classified into defined theoretical grade blocks, which included high grade, high grade with minor gibbsite, high-grade beneficiation, low-grade beneficiation, low-grade other, and waste. As a result, material with a propensity for higher degrees of beneficiation was identified and delimited.
For iron ore beneficiation, the mineral quantities in the ores is essential to establish the degree of upgrading that can be achieved. In a study of the removal of aluminum in goethitic iron ores, mass balance calculations assisted greatly to assess the maximum amount of Al that can be removed without appreciable iron loss, mainly from the goethite. This is shown graphically in Figure 3.6, which shows that 68% of the Al in the sample is distributed in goethite. The goethite also contains 60% of the iron in the sample and cannot be removed. Therefore, if Al is to be removed, only kaolinite and gibbsite can be eliminated without major iron loss, and only as little as 22% of the Al can be removed by flotation or other methods.
Lattice constant refinement can be used to assess the substitution of impurity elements, especially in fine-grained goethite and hematite, as determined by Schulze (1984) and Stanjek and Schwertmann (1992), respectively.
The use of XRD can therefore give a quick assessment of the extent of Al and OH substitution in hematite and the amount of Al substitution in goethite. This was done for five goethite-rich iron ores and is shown in Table 3.4.
Biogenic iron oxides display intimate association with microorganisms inhabiting the ore deposits. In natural sediments, iron oxide particulates are found to occur in close proximity to bacterial cell walls containing extracellular biogenic iron oxides and various biopolymers. Iron-oxidizing and iron-reducing bacteria colonize the biofilms formed on many iron oxide minerals .
Several types of microorganisms growing under extreme environments altering between acidic to neutral pH, aerobic and anaerobic, as well as mesophilic and thermophilic conditions are capable of microbial oxidation of ferrous iron and reduction of ferric iron.
Some examples are Acidithiobacillus sp., Gallionella sp., Leptothrix sp., Leptospirillum sp., and Thermoplasmales (archea). Leptothrix spp. can form FeOOH sheaths around iron oxide minerals through production of exopolysaccharides as a protection mechanism.
Ancient biogenic iron minerals contain biosignatures as in banded iron formations (BIF). Nanocrystals of lepidocrocite on and away from the cell wall of Bacillus subtilis have been observed due to ferrous iron oxidation. Diverse group of Gram-negative prokaryotes such as Vibrio, Cocci, and Spirillum constitute magnetotactic bacteria which synthesize intra- and intercellular magnetic minerals (such as magnetite) and magnetosomes. Several magnetotactic bacteria (living under aerobic and anaerobic conditions) and their magnetosomes have been isolated and characterized from the Tieshan iron ore deposits in China . Microbially induced iron ore formation has been confirmed at Gunma iron ore mine, Japan .
Ubiquitous microorganisms inhabiting iron ore deposits are useful in iron ore beneficiation (e.g., removal of alkalis, silica, clays, phosphorous, and alumina). Because the presence of phosphorous in the iron ore promotes bacterial growth (as an energy source), iron oxide particles having higher phosphorous contents were seen to be colonized by different bacterial cells. Microbial phosphorous mobilization in iron ores has been reported. A polymer-producing bacterium (B. caribensis) has been isolated from a high phosphorous Brazilian iron ore . Microorganisms such as Acidithiobacillus, Clavibacter, and Aspergillus isolated from iron ores are good phosphate solubilizers, because they generate inorganic and organic acids.
Shewanella oneidensis, an iron-reducing bacterium which produces mineral-specific proteins exhibit surface affinity towards goethite under anaerobic conditions. S. oneidenisis are capable of recognizing (sensing) goethite under anaerobic conditions. Shewanella sp. prefers FeOOH and not AlOOH. Such a preferential microbialmineral affinity could be beneficially used to separate alumina, gibbsite, and aluminum silicates (clays) from iron oxides. Microbially secreted proteins are involved in metal reduction. Protein secretion and transport as well as biosynthesis of exopolysaccharides are very important and useful in iron ore transformation. Shewanella putrefaciens, a facultative anaerobic, Gram-negative bacterium can reduce ferric iron oxides and attach preferentially to magnetite and ferrihydrite. Enhanced adhesion of phosphate-utilizing organisms on iron oxides promotes formation of iron phosphate complexes [17, 18].
Magnetite particles formed by dissimilatory, extracellular iron reduction are generally poorly crystallized. Ferrous ions can react with excess ferric oxyhydroxides to form mixed Fe (II) and Fe (III) oxides as magnetite.
BIM of magnetite has been possible in the presence of cultures of Shewanella and Geobacter. Possibility of intracellular deposition of minerals also exists. For example, intracellular iron sulfide formation within cells of SRB such as Desulfovibrio and Desulfotomaculum species has been reported .
Biomineralization brought out by prokaryotes has practical significance in environmental ore deposit formation, mineral exploration through biomarkers, and also in bioremediation of metal-contaminated waters and soils. For example, formation of extensive Precambrian BIF has been attributed to iron-oxidizing bacteria. Biologically formed minerals may be useful as bioindicators on earth and ocean floors.
An example of BCM is the generation of magnetic minerals by Magnetotactic bacteria. Two types of such bacteria are often mentioned, namely, iron oxidetypes which mineralize magnetite (Fe3O4) and the iron sulfidetypes which mineralize greigite (Fe3S4) .
BIF are the largest iron sources distributed globally dating back to about 4 billion years. They contain up to 50% silica and between 20% and 40 % iron and are sedimentary in origin. Main iron minerals such as hematite and magnetite found in BIF are considered to be of secondary origin. Earlier categorization showed domination of carbonates such as siderite and ankerite. It is likely that different mechanisms might have prevailed in BIF .
One traditional model assumed the oxidation of hydrothermal Fe (II) through biotic and abiotic oxidation. Microfossils found in Australia suggested the existence of Cyanobacteria which display various potential biomarker molecules. The presence of oxygen also has been found from the composition of rocks. Formation of ferric iron oxides without oxygen, involving photo-oxidation of ferrous iron by UV radiation has also been suggested. Another recent hypothesis offers direct biological Fe (II) oxidation by anoxygenic phototrophic bacteria.
The presence and nature of minerals of primary and secondary origin in BIF have been widely analyzed. The presence of iron phases such as magnetite, ferrosilicates, siderite, ankerite, and pyrite needs to be considered. Secondary origins of magnetite have been described. Magnetite could have been formed when microbially reduced ferrous iron reacted with initial ferric oxyhydroxides. Oxidation of siderite could also have occurred.
The majority of iron ores that are currently being mined are known variously as banded iron formation (BIF), taconite deposits, or itabirite deposits and were deposited about 2 billion years ago (Takenouchi, 1980). These ores constitute about 60% of the world's reserves. The BIF is a sedimentary rock with layers of iron oxides, either hematite or magnetite, banded alternately with quartz and silicates. The sediments were deposited in ancient marine environments and all were subjected to weathering and metamorphism to a greater or lesser extent.
Prior to enrichment, these sediments normally contained 2030% Fe. Over time, the action of water leached the siliceous content and led to oxidation of the magnetite and enrichment of iron, forming hematite and goethite ore deposits. The grades of the ore and the impurity content varied with the extent of weathering and metamorphism. For example, in tropical and subtropical areas with high precipitation, high-grade deposits that require little or no beneficiation were formed. In temperate climates with less precipitation, the deposits remained as intermediate-grade deposits that require some form of beneficiation. Grade in all deposits tends to decrease with depth due to reduced enrichment by the action of water, and so upgrading is going to become increasingly important as (deeper) mining continues into the future.
The magnetic taconite deposits of the Mesabi Iron Range of Minnesota are typical BIF-type deposits. They contain quartz, silicates, magnetite, hematite, siderite, and other carbonates (Gruner, 1946). They assay about 30% Fe with about 75% of the iron in the form of magnetite and the remainder is largely iron carbonate and iron silicate minerals.
The principal separation in iron ore beneficiation, therefore, is between the iron minerals, hematite and/or magnetite, and silica, principally in the form of quartz. The use of flotation, either alone or in combination with magnetic separation, has been well established as an efficient method for rejecting silica from these iron ores. There are, however, other impurities in some deposits that also require rejection.
Aluminum-containing minerals in iron ore are detrimental to blast furnace and sinter plant operations. The two major aluminum-containing minerals in iron ore are kaolinite (Al2(Si2O5)(OH)4) and gibbsite (Al(OH)3). Some progress has been made in using flotation to separate kaolinite from hematite.
High levels of phosphorus in iron ore attract a penalty because this makes steel brittle. In magnetite, phosphorus is often found in the form of discrete phosphate minerals, such as apatite, which can be removed by flotation. In hematite and goethite ores, however, the phosphorus tends to be incorporated into the lattice of the iron minerals, often goethite. In this case, separation by flotation is not an option. This type of phosphorus contamination needs to be rejected by chemical means.
Besides the BIF deposits, there are also smaller magmatic and contact metasomatic deposits distributed throughout the world that have been mined for magnetite. These deposits often carry impurities of magmatic origin such as sulfur, phosphorus, copper, titanium, and vanadium. While magnetic separation can reject most of these impurities, it cannot eliminate sulfur if it is present in the form of monoclinic pyrrhotite or an oxide such as barite. Flotation may provide an option for reducing the sulfur content of magnetic concentrates when it is present in the form of metal sulfides. It is not an option for oxides such as barite.
Comminution is needed for the liberation of low-grade ores so that the iron content can be upgraded by gangue removal. This necessitates grinding to such a size that the iron minerals and gangue are present as separate grains. But comminution is an expensive process and economics dictates that a compromise must be made between the cost of grinding and the ideal particle size.
Traditionally, grinding has been carried out using rod, ball, autogenous, or semiautogenous mills usually in closed circuit, that is, after grinding, the material is classified according to size with the undersized portion proceeding to the flotation circuit and the oversized portion being returned to the mill. The major benefit of fully autogenous grinding (AG) is the cost saving associated with the elimination of steel grinding media. In the last 20 years, more efficient grinding technologies, including high-pressure grinding rolls (HPGRs) for fine crushing and stirred milling for fine grinding, have provided opportunities to reduce operating costs associated with particle size reduction. A HPGR has been installed at the Empire Mine in the United States for processing crushed pebbles and its introduction has resulted in a 20% increase in primary AG mill throughput (Dowling et al., 2001). Northland Resources operates the Kaunisvaara plant in Sweden, treating magnetite ore with sulfur impurities in the form of sulfide minerals. The required P80 of the ore, in order to achieve adequate liberation, is 40m. This plant uses a vertical stirred mill after AG rather than a ball mill to achieve this fine grind size with an energy cost saving of 35% or better (Arvidson, 2013).
An important part of the comminution circuit is size classification. This can be accomplished with screens or cyclones or a combination of the two. Since cyclones classify on the basis of both particle size and specific gravity, cyclone classification in the grinding circuit directs coarse siliceous particles to the cyclone overflow. In a reverse flotation circuit, these coarser siliceous middlings can be recovered through increased collector addition but at the expense of increased losses of fine iron minerals carried over in the froth. However, if the required grind size is not so fine, then screening can be used instead of cycloning to remove the coarser particles for regrinding and, thus, produce a more closely sized flotation feed (Nummela and Iwasaki, 1986).
Mineral surfaces, when brought into contact with a polar medium (such as water), acquire an electric charge as a consequence of ionization, ion adsorption, and ion dissociation. The surface charge on iron oxides and quartz is accounted for by the adsorption or dissociation of hydrogen and hydroxyl ions. Because these ions are potential determining ions for both iron oxides and quartz, control of pH is important in the flotation of these minerals since the extent of surface ionization is a function of the pH of the solution.
Table 11.1 shows the points of zero charge (pzc's) for some iron oxides and quartz (Aplan and Fuerstenau, 1962). This property is important when using flotation collectors that are physically adsorbed, for example, amines. The pzc's for the three iron oxides, hematite, magnetite, and goethite, are around neutral pH (~pH 7), whereas the pzc for quartz is in the acidic region (~pH 2). The pzc is the pH at which the charge on the mineral surface is zero and is usually determined by some form of acidbase titration. Surfaces of minerals can also be investigated using electrokinetic phenomena with results generally being expressed in terms of the zeta potential. The zeta potential is calculated from measured electrophoretic mobility of particles in an applied field of known strength, and the term isoelectric point (iep) refers to the pH at which the zeta potential is zero. Generally, the iep and pzc are the same if there is no adsorption of ions other than the potential determining ions H+ and OH, but care should be taken with these measurements as evidenced by the variability in the literature regarding the pzc's and iep's of these minerals. For example, Kulkarni and Somasundaran (1976) determined the iep of a hematite sample to be 3.0, but the pzc of the same sample, measured using titration methods, was determined to be 7.1. These results were explained by the presence of fine silica in the hematite sample that influenced the surface properties measured by electrophoresis.
An understanding of the surface properties of minerals is utilized in the selective flotation and flocculation of minerals. For example, consider a mixture of hematite and quartz. The selectivity of the separation between hematite and quartz is related to differences in the surface charge of the two minerals. Below the iep, the mineral surfaces are positively charged and an anionic (negatively charged) collector can adsorb and render the mineral floatable; above the iep, the mineral surfaces are negatively charged and a cationic (positively charged) collector can adsorb and render the mineral floatable. From electrophoretic mobility measurements, the iep's for hematite and quartz are around pH 6.5 and 2, respectively. By choosing the correct collector type and pH, it is therefore possible to selectively float quartz from hematite with dodecylammonium chloride or float hematite from quartz with sodium dodecyl sulfate. This is illustrated in Figure 11.1 (after Iwasaki (1983)). This example is an idealized system, however, and in practice, the presence of slimes and various ions in solution will lead to variations to this model flotation behavior.
Figure 11.1. (a) Electrophoretic mobility of hematite (H) and quartz (Q) as a function of pH; (b) flotation of hematite and quartz with 104M dodecylammonium chloride (DACl); (c) flotation of hematite and quartz with 104M sodium dodecyl sulfate (NaDS) (Iwasaki, 1983).
In this paper, our interests are particles dispersed in a liquid (mainly water), relevant for many industrial particle processing operations. Recently, in-situ synthesis of dispersive nanoparticles has been developed [13,14]. However, there are limitations in the potential combinations of dispersive surfactant molecules and liquids which can be used. In other words, the type of dispersive nanoparticles synthesized by these methods is limited to specific conditions. In this paper, dispersion of fine particles synthesized or generated from natural ores, mainly hydrophilic oxide particles, is discussed. Such oxide particles are processed in plants in diverse fields from pharmaceuticals to natural ore beneficiation by standard separation methods, such as froth flotation, where a surfactant (collector) selectively adsorbs onto a target mineral particle to change its hydrophobicity. Air bubbles injected into the cell attach to the hydrophobic particles due mainly to the hydrophobic interaction, and the particlebubble complexes rise to the airwater interface for collection . This method relies on good dispersion of the different mineral particles from a ground ore in order to have selective attachment of the surfactant onto the target mineral particles. In other words, selective dispersion/liberation is a key to achieving the successful enrichment of the target mineral by flotation [16,17]. Common particle dispersion methods can be divided into two categories: chemical (e.g. pH adjustment (to increase the magnitude of surface charge), dispersant addition); and physical (e.g. agitation, sonication, centrifugation, filtration (to remove fine particles), wet milling [e.g. 18,19]). However, these dispersion methods often have difficulty in achieving selective particle dispersion in concentrated suspensions. For example, wet milling uses a compressive force to break the particleparticle interactions; but it is non-selective (breaking/dispersing all particles regardless of mineral type) and is also energy inefficient [e.g. 20]. Therefore, there is an urgent need for efficient selective dispersion techniques, such as the application of electrical disintegration for fine particle dispersion.
This chapter introduces the principle of how low-grade iron ores are upgraded to high-quality iron ore concentrates by magnetic separation. Magnetite is the most magnetic of all the naturally occurring minerals on earth, so low-intensity magnetic separators are used to upgrade magnetite ores. On the other hand, because oxidized iron ores like martite, hematite, specularite, limonite, and siderite are weakly magnetic, high-intensity magnetic separators and high-gradient magnetic separators are required to upgrade oxidized iron ores. Therefore, it is important to develop and optimize processing flow sheets according to the nature of iron ore to achieve both high recovery and high grade at a low cost. Three flow sheets for magnetite ores and seven flow sheets for oxidized iron ores separation are discussed.
The team achieved a significant milestone on 1 April 2021, reaching three-years Lost Time Injury (LTI) free. Since Minopex commenced work in April 2018 they have continued to operate without injury or harm. Reflecting the teams unwavering commitment to creating a Total Safety Culture.
The SAOB team have made this Total Safety Culture a way of life on site and believe that teamwork, participation, communication, respect, integrity, and accountability are the key ingredients to achieving it. The team lives by the Minopex values and abide by the Minopex Golden Rules and Fatal Risks Standard.
Congratulations to all involved for a truly excellent safety performance. The team at South African Ore Beneficiation Plant are setting a strong example that we are all very proud of.; said James Smith, Executive Vice President of Minopex.
Minopexs operations excellence and continued success is as a result of over 25 years experience in the mining sector. Having started up 46 process plants, we are able to fast track the implementation of new projects, resulting in continued monthly production records. Our solutions are tailormade to suit our clients and we work together to achieve their business objectives.
FMS has been in close cooperation with various mines and industries nationwide and international. The state of the art technologies are laid behind wear resistance AF190 rolls of pelletizing plant roller screen with 3 years life time (Availability+) and high recovery magnetic separators (Recovery+). In addition, FMS has known as sole national manufacturer and globally top rated manufacturer of pelletizing roller screen.
Considering experiences of Fakoor Sanat Tehran Co. (FST), and enjoying specialized and qualified groups in design, quality control, planning, manufacturing, R&D, and extensive after-sales services, FMS has acted successfully in providing beneficiation facilities as well as iron ore concentrate essential equipment.
Regarding the mission of FMS, we have been involved in providing solution for beneficiation plants and has achieved a great success in optimizing the design and production methods by creating innovations.
Nowadays, by developing complete engineering, machining, fabrication, and manufacturing departments to design and manufacture customized mineral equipment, we have been the professional manufacturer of drum separator, WHIMS, roller screen/feeder, coated AF190 roll, vibratory screen/feeder and flotation cells to meet demanding conditions of use.
FMS roller screen availability+ series comes enhanced with its unique AF190 roll which introduces maximum screening efficiency with more than 3 years life time. Since, no roller gap adjustment or roller replacement is required, therefore, the equipment is always available with the efficiency a brand new screen.
AF190 rolls enhanced with high wear and corrosion resistant thermal spray coating can easily bears abrasion, sticking material and impact of material flow. 3 years lifetime with consistent working efficiency makes the roller screen available+.
FMS produced more than 1000 of magnetic drum separators (in over 100 plants and process above 50 million tons concentrate yearly) both wet and dry types. All the magnetic drum separators have been developed and optimized in accordance with plant builders and operators requirements in a closed three lateral cooperation between FMS, EPC contractor and Iron ore mining industry.
As the main separation challenge, WHIMS equipment enables to effectively recover low grade ferrous metal such as magnetite tail and hematite, chromite, and manganese ores. It is also successfully implemented for rare earth ore separation issues such like titanium iron ore.