pellet making machine china

pellet making machine for sale | electric ring die mill

pellet making machine for sale | electric ring die mill

Beston pellet making machine for sale, also called industrial pellet mill machine, has used ring die design to make high-quality pellets from different raw materials. It has become a popular business from small scale to medium and large scale.

Final product: the biomass pellet can be used as biofuel. It is small in size, large in proportion, resistant to burning, easy to store and transport, and the volume is only 1/10 of the same weight of straw. Its density is 0.9-1.4g/cm3, and the calorific value can reach between 3500-5500 kcal, which is high Volatile solid fuel. It can replace firewood, raw coal, liquefied gas, etc., and is widely used for burning in domestic stoves, heating stoves, hot water boilers, industrial boilers, and biomass power plants.

The pellet making machine is operated by a direct motor connection. The motor is connected to the reducer shaft through a gear coupling. After a 90change of direction, the horizontal motor drives the vertical casting hollow transfer spindle, and the spindle drives the roller to roll the mold. The inner surface completes the pressing process.

During the working, the biomass material falls vertically from the feed inlet, and the material is continuously and evenly distributed on the surface of the mold cavity through the rotation of the pressure wheel (the contact surface of the pressure roller and the mold), and the powdery material is crushed by the pressure roller holes through the mold (holes evenly distributed on the inner surface of the mold). In this process, the material is subjected to high pressure and high temperature to produce physical changes or appropriate chemical changes (according to the materials), which promotes the powdery material to form a continuously elongated cylindrical solid body, and then the particles are cut by a knife and discharged from the discharge port. The pressing process of the pellets is completed.

First of all, make sure that materials is desirable. Its diameter should be less than 2cm and the moisture content is less than 15%. If not, put them into drum chipper to make them smaller. Then put raw materials into crusher. Thats the crushing procedures.

Now raw materials become powder. After removing dust, they are transmitted to the dryer by belt conveyors. With the help of hot air stove and induced draft fan, the temperature inside the dryer becomes extremely high and when materials go through it, the procedure of drying is finished.

Next, materials are sent to the silo by a conveyor, and then it climbs onto the distribution platform, which is above the pellet machine. Under the influence of gravity, materials are distributed to different machines. Thats the pelletizing process.

Beston pellet making machine for sale uses biomass or crops as raw materials to make pellets fuel, which can realize energy reusing. The energy development has positive effect in agriculture, forestry and other industries. It has further promoted the recycling of energy and the development of agricultural economy. If you want to recycling biomass by another method, Beston also has carbonization machine for sale to make charcoal from biomass. Contact us for more information!

Related Equipments