Potash feldspar ore dressing equipment is a typical non-metallic ore beneficiation equipment. The general selection of potash feldspar equipment includes: jaw crusher, ball mill, classifier, magnetic separator, mixing tank, flotation machine, high gradient magnetic Equipment, etc. Henan Xingyang Mining Machinery Factory as a professional mineral processing equipment manufacturers more than 30 years, according to customer needs and actual conditions, can provide ore petrochemical inspection, beneficiation experiment, process design, complete equipment manufacturing, equipment installation and follow-up Equipment operations and other EPC work for the entire K-feldspar mineral processing project.
Complete set of potassium feldspar beneficiation equipment usually includes jaw crusher, ball mill, classifier, magnetic separator, agitation tanks, flotation machine, high gradient magnetic separation machine etc. ZJH minerals as more than 30 years of professional mineral beneficiation equipment manufacturers, according to customers requirements and actual situation, can provide ore testing, ore dressing experiments, process design, a complete set of equipment manufacturing, equipment installation and trainning,for the potassium feldspar ore dressing of EPC project.
Potassium feldspar is also known as orthoclase, its chemical formula is: KalSi3O8, its theoretical composition is SiO2 64.7%,Al2O3 18.4%, K2O 16.9%.Potassium feldspar belongs to monoclinic crystal system, density 2.54-2.57g/cm3, specific gravity 2.56-2.59g /cm3, hardness 6, usually meat red, white or gray.Potassium feldspar has the characteristics of low melting point (115020), long melting interval, high melting viscosity;Mainly used in glass (accounting for 50-60% of the total amount), ceramics (accounting for about 30% of the total amount), can also be used for making potash fertilizer, chemical industry, glass fusion agent, ceramic body batching, ceramic glaze, enamel raw materials, abrasives, glass fiber, electrode and other industries.
ZJH mainly focus on producing and supply crushers, ore grinding equipment, mineral Beneficiation equipment, laboratory and pilot scale ore dressing equipment for Mining and Mineral Processing Industry. Our aim is to work together with Mines, Mineral Beneficiation Plantsfor helping to reduce the operating cost ,to improve the operating efficiency.
The final sand of this project is supplied to the commercial mixing station. Due to the low price of raw materials for producing ceramics with potassium sodium feldspar, the demand is gradually reduced and the market is depressed, so the customer turns to the production of manufactured potassium sodium feldspar sand. Now it has been put into production, the quality of finished product got the highest profitability. Currently it produces fine product of 300t/h.
Location:Saham, Oman Material:Limestone Input Size:Below 720mm Output Size:0-5mm, 5-10mm, 10-20mm, (Oman standard) Capacity:300t/h
Location:Russia Material:Plagiogranite Input Size:Below 700mm Output Size:0-5mm, 40-70mm (0-5mm, 5-10mm, 10-20mm) Capacity:300-350t/h
Location:Mecca Material:Granite Input Size:Below 1000mm Output Size:0-10mm, 10-13mm, 13-20mm, 20-25mm Capacity:400-500TPH (12 hours per day)
Potash feldspar belongs to the feldspar family of minerals. According to its density, hardness, and the components and characteristics contained, it is widely used in glass, electric porcelain and other industrial manufacturing and potassium fertilizer. In addition, potassium feldspar can be ground into ultra-fine white ash powder, which can be used in construction, agriculture, industry, rubber, metallurgy and some high-tech industries.
Potash feldspar has high density, hardness, and silica content, which would cause serious wear on the crusher parts like the plate, hammer, chamber. Therefore, in the design of the potash feldspar crushing process, the crushing machine of the lamination principle is used as much as possible to reduce the wear of the wear-resistant parts. Potash feldspar crushers include jaw crusher, cone crusher, and impact crusher.
The raw materials are fed into the silo via a dump truck, and the materials are evenly fed into the jaw crusher through a vibrating feeder to prevent the material from impacting the crushing cavity to cause damage to the equipment. At the same time, the situation of overloaded stuffy cars is avoided. The jaw crusher performs initial crushing, crushing the material to a particle size of about 250mm, and then uniformly feeding the crushed material into the cone crusher through a belt conveyor for secondary crushing. The vibrating screen is used for sieving and grading. Materials larger than 31.5mm are returned to the cone crusher for further crushing. Materials below 31.5mm are divided into 0-10mm and 10-30mm materials by the belt conveyor to the finished product pile.
Potassium feldspar raw material is sent into the raw material warehouse by the forklift or dump truck, and then evenly fed into the jaw crusher by the vibrating feeder, crushing the material to the size of about 150mm, and then sent to the cone crusher for the second crushing. The crushed material is classified by a vibrating screen, and the 0-5mm material is sent to the finished product pile by a belt conveyor. The material> 30mm is sent by the belt conveyor to the cone crusher and then broken by the vibrating screen to form a closed circuit. 5-30mm material is sent to the high-efficiency centrifugal impact sand making machine through a belt conveyor for crushing. The crushed material is classified by a vibrating screen, and 0-5mm material is sent to the finished product pile by a belt conveyor. The material is again sent to the high-efficiency centrifugal impact sand making machine to be broken, forming a closed circuit, until the material meets the specifications of the finished product, and then sent to the finished product pile.