powder grinding mill knife

mikro ump knife mill | hosokawa micron powder systems

mikro ump knife mill | hosokawa micron powder systems

The Mikro UMP Knife Mill is a compact, intermediate speed impact mill capable of producing granular and coarse to medium particle size distributions for Pharmaceutical and Food applications. The Mikro UMP Knife Mill was developed to meet the Pharmaceutical and Food markets increasing demand for high performance milling technology. The design of this mill meets the requirements of the Pharmaceutical Industry for both product performance and cleanability. The mill design incorporates reduced internal surface areas, connection points, and acute internal surfaces for the ease of cleaning. The knife rotor is designed and manufactured in one piece to minimize surface areas where contamination can occur and to provide ease of cleaning. The mill design also incorporates a liner and screen assembly for particle size control. Various screen types are available to suit the application.

The knives are designed with two impact surfaces; one side is provided with a flat surface for greater impact and the other side is provided with a knife edge for better shear or cutting force. The rotor is designed to be reversible on the drive shaft so that either impact surface can be selected for the specific application. The type of impact surface selected along with the rotor speed and size of the retaining screen will produce a wide range of granular to intermediate particle size distributions.

The fabricated grinding chamber is constructed in 316 stainless steel with a high quality 0.6 micron Ra surface finish. Higher quality finishes are available for specialty applications. The access door is hinged to the grinding chamber and is secured with a tri-clamp closure for easy and quick access for maintenance and inspection. The product feed inlet can be either through the mill door (CF design) or from the top of the main body (TF design). The bearing housing is a cantilevered design including maintenance free, sealed for life bearings. There are double lip seals and a gas purge between the drive and the process area to eliminate material contamination and premature wear of drive components.

The knives are designed with two impact surfaces; one side is provided with a flat surface for greater impact and the other side is provided with a knife edge for better shear or cutting force. The rotor is designed to be reversible on the drive shaft so that either impact surface can be selected for the specific application. The type of impact surface selected along with the rotor speed and size of the retaining screen will produce a wide range of granular to intermediate particle size distributions.

The fabricated grinding chamber is constructed in 316 stainless steel with a high quality 0.6 micron Ra surface finish. Higher quality finishes are available for specialty applications. The access door is hinged to the grinding chamber and is secured with a tri-clamp closure for easy and quick access for maintenance and inspection. The product feed inlet can be either through the mill door (CF design) or from the top of the main body (TF design). The bearing housing is a cantilevered design including maintenance free, sealed for life bearings. There are double lip seals and a gas purge between the drive and the process area to eliminate material contamination and premature wear of drive components.

knife mill, knife chopper - all industrial manufacturers - videos

knife mill, knife chopper - all industrial manufacturers - videos

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

The knife mill GRINDOMIX GM 200 is perfectly suited for grinding and homogenizing foodstuff and feedstuff. It accepts sample volumes up to 0.7 liters and homogenizes substances with a high water, oil ...

Cutting mills are designed for grinding soft, medium-hard, tough, elastic, fibrous materials, as well as heterogeneous mixes of products. The heavy-duty Cutting Mill SM 300 excels especially in the tough ...

... with a medium-power motor of 1.5kW and a rotor with maximum speed of 1,500 RPM. A broad range of accessories including various hoppers, collection systems, rotors and sieves are available to configure the mill ...

Overview Reproducible comminution for a wide range of samples The quietly operating Knife Mill PULVERISETTE 11 is the ideal laboratory mixer in industry quality for very fast and gentle comminution ...

... 50l/h. A cutting rotor speed of up to 3400 rpm ensures a high air throughput, fast processing and reproducible results. The simple FRITSCH cleaning makes your work much easier. Unique grinding chamber geometry In ...

Batch mill suitable for dry grinding of hard and brittle substances up to 250 ml with a fixed speed of 20.000 rpm. Double-walled grinding chamber can be cooled with water through two hose adapters Removable grinding ...

... redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The ...

... by the shearing effect between rotor and stator knives. The double diagonal cutting geometry creates a precise cutting gap over the entire working width of the machine. The screen mounted underneath the cutting rotor ...

The finest cut! General Fine Cutting Mills of the type SecoMy S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting ...

Cutting Mills of the type SecoMy are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. Application areas include materials that must be finely ...

... need for special knife sharpening as all the knifes are straight sharpening. All the different cutting knives are adjusted according to proper size gaps present outside the granulator. This creates ...

... capacities CU60, CU80 and CU120 are three models. CE and EAC certificates are available. FEATURE VALUE ENGINE - 45 kW BLADE CODE - 30+4 WEIGHT - 3.800 Kg LENGTH - 4.100 mm WIDTH - 1.900 mm HEIGHT - 3.200 mm CAPACITY ...

... three models. CE and EAC certificates are available. TECHNICAL SPECIFICATIONS - CU80 FEATURE - VALUE ENGINE - 55 kW BLADE CODE - 40+6 WEIGHT - 5.000 Kg LENGTH - 5.300 mm WIDTH - 2.000 mm HEIGHT - 3.600 mm CAPACITY ...

... three models. CE and EAC certificates are available. TECHNICAL SPECIFICATIONS - CU120 FEATURE - VALUE ENGINE - 90 kW BLADE CODE - 60+8 WEIGHT - 7.400 Kg LENGTH - 6.200 mm WIDTH - 2.100 mm HEIGHT - 3.700 mm CAPACITY ...

The laboratory granulator was designed for the production of granulates, for example for the determination of MFR/MVR values, out of plastic pipe slices or plastic plates. The laboratory granulator simplifies the preparation of granulate ...

"The knife tool is refined with imported special tool-steel. the clearance between knife tools are adjustable . when it becomes blunt by using , it can be dismounted repeatedlly . it is Durable ...

... channels on the rotor walls directs the regrind material down and eliminates centrifugal accumulation and jamming in this zone. This simple expedient prevents unnecessary rotor-knife geometrical mounting ...

... plastic products and scraps. Optional tangential rotor housing for efficient size reduction of hollow body blow moulding products. Universal, straight, staggered, guillotine or clamping vedge type rotor ...

... plastic products and scraps. Optional tangential rotor housing for efficient size reduction of hollow body blow moulding products. Universal, straight, staggered, guillotine or clamping vedge type rotor ...

The SML 16 models are a series of particularly wide machines with smaller rotor diameters for the processing of thin-walled panels and skeleton waste, directly in the deep drawing line. The very low design of the granulator ...

The Rotorrake is a robust, single-shaft coarse chopper in an inline version. Blades and counter blades are mounted one after the other on the carrier shaft. The sturdily attached counter blades are each cleaned by rotating ...

... PERFECT FOR CUTTING INTO SMALL GRANULES The THM CM Cutting Mill is the right choice for cutting of pre-size-reduced parts into smaller granules. Size reduction takes place by a wear resistance rotor ...

... Upgradeable With Cail & Fletcher heavy duty in-line shredder the existing carrier can be used when upgrading. Mills are protected from rocks and metal. Mill roll wear is significantly less than with ...

The Knife Mill, type PS is used for single-step size reduction of different types of rubber that are easy to shred, such as NBR, SBR and EPDM in standard bale size. The rubber can be cut into granule ...

... Cutting Chamber size up to 8"x18" (20.3cm x 45.7cm) Throughput: 123 lbs/hr to 221 lbs/hr (58kg/hr to 100 kg/hr) 3 knife open rotor design for efficient size reduction Rotating end discs for ...

... 2000H MSHP 2000CT MSHP 3000H MSHP 3000CT Weight Kg 1750 1950 2500 2770 Cylinder Pressure bar 320 320 320 320 Blade Length mm 175 175 175 175 Dimension A mm 1936 1938 2065 2045 B mm 1466 1462 ...

The Rapid RG Series is specifically designed for beside-the-press recycling of hard and brittle materials. The ultra-slow rotor speed and screenless operation provide low noise level and very low dust level even with ...

Features Very little dust The cutters do not re-cut sprues and runners in the same place so that the cutters can minimize dust, static electricity, and heat generation. Very few miscuts The cutters have the mechanism to cut the sprues ...

RotaCut RCX handles extreme applications The Next Generation Grinder for Primary Sludge, Digester Cleanout & Biogas Applications The RCX is the newest iteration of the RotaCut line. It is a complete redesign of the inline grinder concept ...

... of the gaps between the circular knives. The strips reach the counter-knive one besides the other and they are cut by the knife cylinder into cubical shape. During the cutting process there is no measurable increase ...

powder grinding | glen mills, inc

powder grinding | glen mills, inc

A jet mill grinds materials by using a high speed jet of compressed air or inert gas to impact particles into each other. Jet mills can be designed to output particles below a certain size, while continue milling particles above that size, resulting in a narrow size distribution of the resulting product. Particles leaving the mill can be separated from the gas stream by cyclonic separation.

powder milling and grinding processing equipment supply | mpt - mill powder tech

powder milling and grinding processing equipment supply | mpt - mill powder tech

Mill Powder Tech (MPT) has been a grinding and mixing machinery manufacturer from Taiwan for 70 years, and their client is a leading seasoning powder supplier. Hot pepper, black pepper, white pepper and cinnamon are the spices mainly sold by the client to Europe and Japan. As soon as you walk into their plant, among all the production lines from countries such as Taiwan, Japan, Europe and China, you can see three sets of turnkey projects from MPT. At ALLPACK Indonesia tradeshow, twenty years later, the client decided to order two extra production lines from MPT for their new factory. Why MPT? For the last 20 years, none of the machines from MPT needed any repairs, even during busy seasons when they required the machines to operate 24 hours a day.

A lifespan three times longer, quality powder delivery, malfunction-free, high production, low labor cost, simple installation, and easy maintenance are what the client experienced. They never needed MPT to install the production line - that's how uncomplicated it is. For spices that are dry, crispy and contain less than 15% oil, PM6 is perfect. Actually, sugar is the major grinding product for most of buyers. MPT's pin mill turnkey project has been maximizing its production capacity and providing evenly sheared powders, which permits the Indonesian client to sell high-quality seasoning powders globally.

As a spice supplier, two factors necessary in order to provide high-quality spice powder are: to ensure the scent of spice is perfectly preserved, as well as to ensure each spice is evenly ground. For the last 70 years, beginning with Japanese style, to today's German milling system, MPT's milling and grinding equipment has avoided the heat effect on powder. Their client's spice milling turnkey project consists of feeding hopper, belt conveyor, hammer mill, pin mill, cyclone separator, dust collector and discharge rotary valve. The design, which separates the motor from the bearing and belt, along with hammer mill and pin mill's heat dispersion from rotor's rotation, means that powder's standard is elevated.

We all now that overheated powder milling equipment can result in a change in the spice's flavor, scent preservation, and machinery malfunctions, along with shortened lifespan (70% of usage of machine is recommended), by allowing each component to operate independently, the machine's lifespan is prolonged. PM6, the spice grinding and milling production line, is designed for mass production without thermal influence.

When you insert 100 kg of spices into a grinder turnkey project, the output is also 100 kg. Nothing is wasted. Cyclone separator plays a role in directing where the powder gets collected. For new plant expansion, the cyclone separator is tailored for hygienic reasons. After multiple of shearing and grinding cycles, powder that can't pass through the filter mesh will get collected by the cyclone separator. Powder that does pass through would be the product that is ready for sale. The hammer mill and pin mill are responsible for the grinding processes, and the dust collector ensures nothing is wasted.

At the new plant, the PM6 production line used to mill hot pepper, white pepper, black pepper and cinnamon, is a combination of feeding hopper, belt conveyor, hammer mill, pin mill, cyclone separator, dust collector and discharge rotary valve. It is a heavy duty 50 HP milling system that is suitable for mass production, with150-200kg per hour and 20mesh ~ 150mesh fineness.

The Indonesian client chose a pin type milling machine to pulverize their spices. Stud type, pin type, and knife type rotors are optional for grinding raw spices into powders. Choosing a rotator gives you different results from grinding after going through three shearing and grinding procedures, adjusting filter mesh and changing knife size enhances the powder fineness in the end. Various kinds of spice milling can be done by switching washable knife and filter mesh, although single machine for one kind of spice is recommended, unless ozone treatment is applied.

Particle size distribution report paper is delivered with the milling machinery procurement, which proves filter mesh's efficiency and expectation of powder fineness is achieved. Generally, MP6 is a set of milling and grinding equipment with adjustable production amount and cutting size. If PM6 operated 24 hours a day, the production capacity would be 24 tons for sugar, 12 tons for rice, and 6 tons for seasoning spices.

To cut bigger objects such as ginger, hot pepper, herbs or sugar, TM series cutting equipment is available. It has no filter mesh, therefore, alternate knife sizes is how you can cut with desired size. Pin mill (PM) grinding equipment suits dry and crispy foods that contains less than 15% oil, including coffee, sugar, beans, spices, flour, rice, etc. For oily or sticky products that contain over 15% oil, such as sesame and peanuts, PMM series grinding machine is available. For extra fine powder milling, APM grinding equipment is available.

PM6 is a powder milling turnkey project that has been around for so long that its design has been modified to include simple installation and easy maintenance over the course of time. Rotor is the only part that needs to be obtained from PMT, since all the holes are fixed, and so buying it somewhere else can be risky. Other than that, ordinary maintenance, such as changing bearing oil or switching air discharge cloth and filter screen, can simply be done by the client. In addition, having all the washable parts makes cleaning easy. Overloaded machine shuts down with its auto protection, and the user can simply unload everything and restart the machine.

We have many clients that we haven't heard from for 20 years, because their machines never have major issues. The goal of our business is to provide good service to retain happy relationships., said a manager of PMT. In order to provide total solutions, if you are new to finding suitable grinding equipment, there is information you need to provide before receiving constructive suggestions, including the food that you wish to mill, the plant size and location, production capacity, and powder fineness requirements. Sometimes a buyer would send a sample product for MPT to grind.

The progress report is given prior to machine assembly, onsite and offsite lab testing and electricity examination videos are provided. Communication is always there thoughout the whole process. Operation training and the machine manual are delivered to ensure user's proper use of the machine.

In Japan, people's green environmental expectations and the trend of using recycled material to create dynamic product is common. Paper recycling is one of the most common types of recycling. In order to use recycled paper as a housing construction material, a Japanese company, HRD, purchased Mill Powder Tech (MPT)'s turbo mill to establish quality paper powder for their plant in the Philippines.

MPT is a powder mill supplier with over 70 years of experience. When HRD handed them a paper powder sample, MPT sent them a design sketch of a customized turbo mill that is specifically designed for the purpose. HRD uses three different types of papers including poster paper, carton and A4 paper. Thus, paper powder's character is required to be elastic and sticky with cushion and with cotton's look and feel. To meet HRD's requirements, instead of using the traditional paper pulp method, MPT designed a turbo mill that uses multiple blades to generate high speed vortexes and vibrations. The powder handling processing equipment turnkey project contains the turbo mill, blender and mixer, separation treatment equipment, etc.

"It was a concept and MPT made it happen." said Tony Ling, the sales manager of MPT. MPT designed a powder handling and processing equipment turnkey system that is cost-saving and in the end created the most valuable paper powder to benefit their customer's business. "Because of our turbo mill, HRD's paper powder has become their best-selling housing construction material, a material that is anti-humidity, non-flammable and earthquake-proof, which is perfect for Japanese houses."

The paper powder is made of recycled paper after using a mixture of chemicals. To form an elastic character, the size of each particle matters. Too small or too big can fail to meet the standard. "Our turbo mill is designed not only to fabricate fine quality of paper powder, but also has high production capability," said Mr. Ling.

Japan is one of the high-tech countries that is famous for delivering high quality powder processing equipment. While other nations are imitating their technology and trying to catch up, Taiwan's seasoned equipment building experience, turnkey project implementation ability and reasonable price is attracting them over to seek material handling machinery solutions.

Paper Recycling Turnkey Grinding System consists of a hammer mill, metal remover, turbo mill, U type screw conveyor (scrapers), explosion outlet, cyclone separator, rotary valve, level switch, cooling water inlet and explosion outlet.

6000 gauss magnetic separator is ideal for paper recycling; It removes metal particles from recycled papers. Recycling paper goes through a metal remover before going into a turbo to prevent damage turbo mill, it is also equipped after hammer mill.

By lowering the temperature in the spiral chamber and allowing particle's self-impact, and by using four blades' grinding enforcement, Mill Powder Tech's screen-less turbo mill, TM-600, was made to grind 5mm particles of processed seaweed powder into 100 mesh per second, along with 80-100kg per hour production in order to meet a client's expectations.

Located in Italy, the client was one of the few seaweed powder providers mainly supplying Agar-agar and carrageen (also called Carrageenan) to food and pharmaceutical companies. And their newly developed products required finer powders. Knowing Mill Powder Tech has over 70 years of powder mill experience, at a tradeshow, the client challenged them to process their agar-agar, the hardest seaweed to process.

Due to agar-agar's elastic and dense textures, it is difficult to grind. With the regular turbo mill, the temperature rises once it starts cutting. Furthermore, dry agar-agar is very tough and elastic. Therefore, instead of ordering a whole powder processing line, the client only requested the turbo mill in order to test out Mill Powder Tech's capability.

Overall, heat elimination is important. Mill Powder Tech's Turbo Mill is screen-less, operated with cold water recycling system to cool down the grinding temperature in chamber. Screw transportation was replaced with vacuum suction to eliminate agar-agar's cluster.

For the last 35 years, TPM has been dedicated to developing turbo mills that would produce smaller particles without changing material textures or odors. Today, Mill Powder Tech provides five series of turbo mills, ranging from TM-250 to TM-1000; rotation speed from 1,200 to 8,000 (r.m.p), horse power from 15HP to 150HP and particle size in a range of about +18 to 325 mesh.

Heat can change the texture of any particle that is dense and glutinous, also; the material generates heat if grinding requires more power. To avoid heat, the turbo mill was designed without screen to assure wind's smooth flow. As a result, the cooling system successfully reduced the heat, and a fine and white powder was created.

There are five series (TM250, TM400, TM600, TM800, TM1000 ) of turbo mills which each contain a number of blades. When particles are put in the feeder, besides their self-crushing, shearing and grinding are also conducted in a few seconds to meet specific size expectations.

Along with agar-agar and carrageenan, materials that easily generate heat can also be pulverized by Mill Powder Tech's powder grinding machine, including plastic, sugar, pigment, toner, leather, asbestos, etc.

In the end, Mill Powder Tech's client was able to deliver high quality processed seaweed powder to their pharmaceutical company clients, and decided to buy the whole powder handling processing line and subsequently to make further orders later on.

After a year of testing and trials, a completed ginger powder processing line was built by Mill Powder Tech, based in Taiwan, for a company named Wakaya Perfection Ltd. The powder handling processing equipment was designed with 150kg per hour production capacity, FDA approval, 1/3 energy-saving, and the ginger was ground profoundly to meet the required standards.

Organic pink Fijian ginger only grows on Wakaya Island in Fiji, its unique character has allowed Wakaya Perfection to sell the ginger powder to high-end consumers in the U.S. The quality of ginger powder has to be top rated, which means no change of color or odor, and its fineness has to be delicate. Ginger powder is used in beverage or capsule form, thus the process requires food-grade standards. The processed powder will be tested for FDA approval. Also, because of the shortage of resources on the island, water and energy conservation should be considered.

When the ginger is put in the ginger washing machine, all the ginger is tumbled and rinsed back and forth with 9 nylon brushes to remove the dirt and peel off the skin without using a great amount of water. Next, the washed ginger is put into a feeding hoper for slicing. The ginger cutting machine comes with different sets of knives that cut ginger into pieces. When the fiber in the ginger is trimmed, it enhances the quality of the ginger powder. Moreover, the slicing process reduces the time for drying, which saves electricity and money.

Once the ginger is done cutting, it is delivered to the oven for the drying process. The two-door drying machine has the capacity to handle up to 40 trays of ginger. It has multiple blades to carry out hot air and the hot air can be re-used, which is energy-saving. As you can see from the video, even the bottom layer of ginger is dried entirely.

Rather than sourcing from different manufacturers for various machines, Wakaya Perfection had Mill Powder Tech to design and supply the entire production line. In the end, the processed powder was sent to the U.S. and received FDA approval, and its reasonable production costs positively benefited Wakaya Perfection's business.

The advantage of the ginger washing machine is its 9 nylon brushes and controllable back and forth rotating function. The patented designed allowed all ginger to roll out automatically without extra labor. It is also designed to use the minimum amount of water to get the job done. In Fiji, the source of water is rain; therefore, the ginger washing machine's water is drained and reused.

Cutting is an important procedure before drying. If ginger is not sliced to the right thickness, it can lead to different colors of powder. Mill Powder Tech's cutting machine, SM-2, is adjustable to slice ginger in various thicknesses. The thinner a ginger slice gets, the shorter the fiber is, and the easier it is to dry. It comes with three sets of knives including 2-8mm, 3-8mm, and 8-20mm. The size of the cutting machine is 750*520*900 mm, weight 70kg, horse power: 1HP *1, 0.5HP *1 and its production capacity is 300-1000kg/ hr.

The quality of ginger powder is related to the dryness of sliced ginger. Too wet, the color of ginger powder won't be even, it is harder to grind, and the smell is not as fresh. The ginger drying equipment, DM-480, is a two-door dryer that is designed to blow dry in different directions with controllable temperature between 20C to 160C. It has an auto-stop function when it reaches expected temperature; it is energy-saving and has capacity of up to 40 plates of gingers.

Before turning dried ginger into ginger powder, the hammer mill is equipped for the 1st stage crushing. The hammer mill's dimensions are 900*540*900 L*W*H mm, rotating speed is up to 3200 RPM with 80-200 kg/hr production capacity.

Ginger has fibers. Having a cup of ginger tea with fibers in it would change the texture of tea. To fix it, fiber has to be cut into shorter strands. Turbo mill, TM400, consists of a 4-blade shearing knife that would cut the fiber into smaller pieces in a few seconds. In addition, because of the short fiber, it's easier to grind, thus, less heat is generated.

A good cup of coffee is a blended coffee that contains different coffee beans from various regions, since it is very rare for a single type of coffee to meet all of the preferences, including flavor, aroma, body and aftertaste. Hence, coffee bean blending has become a fine art, and many coffee companies have developed their own blended coffees as their specialties.

In Sydney, Australia, Cofi-Com TRADING PTY LTD is a commercial green coffee producer that supplies blended coffee designs and roasted coffee analyses. The beans come from different regions of the world, which allows for creating recipes of beans. Their own blended coffees, namely Venus Superior Blend and Aroma, are well-known and sold to famous coffee shops such as illy, Starbucks, etc. After using the same ribbon mixer for years, Cofi-Com wanted to replace the old blending equipment in order to sustain the quality of mixing. Hence, they contacted Mill Powder Tech with their requirements. Mill Powder Tech is a Taiwanese powder handling equipment manufacturer with over 70 years' experience. Based on Cofi-Com's requests, 3 tons handling amount, a complete production line design and also presentable to their visitors, Mill Powder Tech designed a ribbon mixer production line with total solutions.

Ribbon Mixer's blending was the most important step in the turnkey project. To prevent unstable coffee taste, 100% uniform mixing was required. To show how precise Mill Powder Tech's ribbon mixer was, rather than using coffee beans, Mill Powder Tech used beans with dynamic colors; there were yellow, green, red, black and brown beans. After a series of tests and trial, you could see the different colors of beans spread out evenly.

Normally rotary cone mixer is recommended for coffee bean mixing, however, because Cofi-Com preferred a machine that is more flattering, therefore, Mill Powder Tech customized horizontal mixer to meet their specific needs. Mill Powder Tech adjusted the width between ribbon and barrel, and the width of ribbon itself to prevent breaking of beans occurred while mixing.

The blending coffee's turnkey design consisted of a bucket elevator, a destoner machine, a ribbon blender, a dust collector, a storage bin and an automatic sewing machine. When coffee beans were dumped into a feeding hopper, a bucket elevator would carry them to a destoner machine that shakes out the unqualified ones. Later, the beans were sent to a ribbon blender for mixing. Once done blending, the dust collector was connected to remove the particles. In order to ensure the continuation of operation, well mixed beans were stored in a storage bin temperately while conducting packaging and sewing with sack bags.

Overall, the whole coffee blending processing line was designed with 3 tons of handling capacity. For production efficiency, the storage bin was designed to allow non-stop processing, and to assure bean quality, destoner machine was equipped. At the end of the production line, an automatic sack sewing machine was connected to conduct packaging procedure. It was a one-stop production line with outstanding mixing job and assured time and money was saved. As a result, Cofi-Com was thrilled with Mill Powder Tech's high performance machinery. So far, the ribbon mixer processing line has been operating efficiently.

Mill Powder Tech is located in Taiwan and has over 70 years of industrial powder handling equipment and turn-key system experience. Mill Powder Tech's great flexibility in customization will help you save costs and energy in the long run to ensure your business benefits.

Nestl S.A. is a Swiss multinational food and beverage company headquartered in Vevey, Switzerland. It is the largest food company in the world measured by revenue. In 2007, they came to Taiwan intending to find a qualified supplier making Nestl beverages, namely, Nescaf Coffee and Nestl MILO. Besides having their own World Standard processing equipment testing and production procedure systems, Nescaf also requested meeting GMP certification and custom-made mixing turnkey system.

Three years later after negotiation, commissioning to the extra purchasing, Mill Powder Tech (MPT) delivered state of the art powder processing equipment with high production capability. When you walk into the plant, you can see a large production system with six ribbon mixer (mixing blender) processing lines - three for Nescaf Coffee and another three for Nescaf MILO, packing in highly intense speed. The whole industrial blender turnkey project was rigorous, but MPT pulled it through with their seasoned powder handling processing equipment building experience.

In Nestl's custom built processing plant, horizontal mixers (RM-300 & RM-500) are used for the 3-in-1 coffee and MILO powder mixing process. They are a total six powder handling processing equipment lines; they are GMP certified patented (patent # I311923), meet Nestl International Processing and Production objectives and is the only one in Taiwan.

Ribbon Mixer can handle a maximum batch volume of 4,800 litres (2,000 kg) of product with rotation speed between 18-36 RPM. It is designed to meet high-speed dry powder mixing efficiency. Ribbon mixer's shaft seal and bearing are specifically designed to reduce rolling friction which allowed long-term usage. Agitator ribbon assures pure additive blends by performing mixing operations. Both inner and outer sides of the ribbon mixer are polished and easy-to-clean.

Industrial cone blender is applicable for mixing particles such as drugs that are made of various components with versatile gravities. For RC-3000, its production capacity is 50 to 3,000 kg and 120 to 7,000 liters.

Because of the conical shaped blender and the separated motors (outer barrel and inner blades), cone mixer is able to spin at an angle of 0 to 360 degrees with 4-way mixing action. Overall, it is an optimal mixer for products of high viscosity and density.

Double cone mixer, DC-50 and DC-100, is an economical blender that is used to combine multiple small batch materials including food preparations, cosmetic manufacturing, resin powder additions, 3-in-1 coffees, herbal medicines, plastics, vitamins and minerals etc. It is an efficient and adaptable blender for mixing dry powder and granules homogeneously.

Mill Powder Tech (MPT) turbo mill handles what other powder processing and handling equipment can't surpass namely German machine quality in the market with solid reputation. With more than 70 years of powder handling experience, MPT has sold their powder machine to over 70 countries and grounded hundreds of types of materials into high quality powders.

A soy milk drink that is sold in Hong Kong, mainland China, Australia, New Zealand, North America, Europe, South East Asia and other markets throughout the world, this leading beverage company that has been selling soybean milk for decades - it has high-protein and sold at an affordable price to accompany everyone's breakfast.

For years, they've been using the traditional method to make soy milk - from harvesting, grading, de-hulling, grinding, formulation, sterilisation, aseptic storage to the final packaging. They also supply soy products including tofu, natural soy-based products and desserts, pasta and noodles. A few years ago, they wished to start selling soy mill in China. However, China is a big country, which means shipping fresh soy milk can be tricky, and the cost of making soy milk is high, which means they also need to find other solutions to cut down costs. Knowing MPT has more than 70 years of powder handling experience, they contacted them for advice.

MPT designed a powder processing line and showed them how the production line is going to reduce the staff cost, prolong expiry date and create an additional valuable product for them. It is an automatic production line that requires less staff to monitor and operate; it uses turbo mill to grind soybeans, which saves time and money for extra processes; and lecithin can be extracted from soybean powder. Overall, the production capability is higher!

The soybean powder production line includes a turbo mill, cyclone equipment, dust collectors, a screw conveyor, a bag filter, a soybean skin-grinding turnkey system, a tunnel type dry-cooling machine, a fine-stone vibro separator and a density filter. It is the result of years of blade structure development and relentless testing. When using MPT's turbo mill to grind soybeans, the powder is fine, the temperature is stable, the particles are constant, the flavor is contained, and the soy protein is maintained.

"Our turbo mill is sold worldwide, it is competitive regarding meeting clients' powder requirements and at the same time cost-saving. It is our goal to deliver authentic powder handling equipment for our clients." said the sales manager of MPT.

During the process, the high quality of bean powder can be stored for one month. Additionally, rather than selling regular bean related tofu products, the powder machinery system is able to create valuable lecithin after the beans are separated into three parts - coat, nut and lecithin. MPT not only solved the company's soy milk preservation problem, they also assisted them to develop a new product.

MPT delivers innovative, high efficiency powder processing equipment to leading companies in dynamic industries such as food, spices, environmental recycling material, mineral, pharmaceuticals, etc. So far, the soybean beverage company has procured two soybean powder mill lines located in Hong Kong and China and the 3rd set of powder processing machine turnkey projects is under negotiation. Their business has grown so well that the cooperation continues.

Compared to the powder-handling equipment in Taiwan, the machines in Japan and Europe are 3-5 times more expensive. In order to stay competitive, there are more and more buyers seeking powder processing machines with reasonable prices elsewhere. Mill Powder Tech (MPT) is a Taiwanese powder processing equipment supplier that has sold their grinding machines to more than 70 countries and ground hundreds of materials with prominence. Even in Europe, MPT is able to meet the strict requirements, for instance meeting CE criteria and design high quality powder machines.

In Spain, there's a well-known carrageen supplier that needed to buy powder machines to integrate with the ones in the plant due to the increasing sales. To find a qualified supplier, a series of evaluations were conducted. Because MPT's successful turbo mill stories in Asia, they contacted them. The company perceived the contrast between the carrageen powders made by MPT and others, as well as the productivity and machine performance. In the end, MPT won the order with outstanding achievements. The company ended up purchasing two sets of powder processing equipment systems with four turbo mills.

The powder system integration was a challenge but it went well. For a turbo mill, regardless its powder fineness (200 mesh) and productivity (130kg per hour), the outstanding achievements have surpassed other European competitors. Plus, the easy to operate and acceptable price is also advantageous and allowed the company to be more ambitious. Each powder handling line contains a vacuum suction, screw conveyor, vibro separator & filter, rotary valve, cyclone separator, explosion relief valve and rotary valve. Two turbo mills are the major machines among the whole project. MPT's turbo mill is a powder grinding machine that has been developed and modified for decades based on users' experience. Today, MPT's turbo mill can grind any kinds of material, and it's the only one in many regions that is capable of doing so.

Nice Group is a famous enterprise in Taiwan and owns 3 listed companies. It is one of the top 100 enterprise groups in Taiwan with a business scope covering household chemicals, food, logistics and leisure-related areas.

AGV Products Corp is one of the subsidiaries of Nice Group in Taiwan. They have been specialized in producing healthy foods and drinks for years. Due to people's increasing awareness of having good eating habits, AGV Products Corp is able to provide dynamic options of foods and beverages and become a leading company in Taiwan. MPT's turbo mill plays an important role providing reliable and efficient powder handling processing equipment to assist them to reach their production goals.

Pin mill is suitable for small scale to medium scale production, it is easy to clean, reasonable priced and easy to operate. For powder suppliers who wish to provide multiple powders, Pin Mill allows you to implement various rotors (stud type, pin type, knife type), stators and screen rings in order to meet powder fineness standards. Pin mill's easy operation permits you to replace or expand to achieve processing goals.

SFC is a Japanese baking powder company that delivers a large amount of powder every day. Mill Powder Tech (MPT) is a Taiwanese powder machine manufacturer with more than 70 years of powder handling experience. Knowing MPT from a trade show, SFC visited MPT with specific requirements. SFC required a custom-made impact classifier mill, a requirement which allowed MPT to increase their impact classifier mill's production capability - 600kg per hour production capacity and 1,000-5,000 mesh.

For general screen-less air classifying mill, after raw material is ground into fine powder in the grinding chamber, powders are classified in order to meet particular parameters. Each blade is designed with various angles to create dynamic fluent current to capture the finest powder.

"With the Japanese client's new design, baking soda's productivity is increased. Because of their new design, we've developed a new type of air classifier mill with better performance." said Tony Ling, a sales manager of MPT.

Patented S-Type Impact Classifier Mill (S-ICM) powder processing equipment is specialized in dry powder classifying. The optimal multiple responses grinding design, fine powders can be cleanly classified, stable temperature control, high speed operation, manufactured in stainless steel and special type of blades to ensure the grinding process is safe, clean, efficient and high quality. The air classifier is suitable for various industries including pharmaceutical industry, consumer goods, chemical industry, food industry, etc. In addition, custom Engineering and turnkey system design are available.

ICM-410 for CPC Corporation, Taiwan. (CPC Corporation, Taiwan (CPC) is the foremost energy enterprise in the Republic of China.)Impact classifying mill ICM-520 turnkey project for high density fine materials.

In Toronto, there are people who line up waiting outside to buy rice powder for making rice related products for their businesses. Like some businessmen, Mr. Wang started small by selling ground raw rice in a residential building using grinding equipment he bought from a Taiwanese powder handling processing machine supplier, Mill Powder Tech (MPT). MPT is a powder handling equipment builder with more than 70 years of experience and their powder processing machine is sold worldwide.

The business went extremely well, sometimes there are people waiting outside for 24 hours just to buy batches of rice powder. Two years later, the owner moved to an industrial district and purchased bigger powder processing equipment to cope with the large demand.

In two years, Mr. Wang has upgraded his turbo mill from TM 400 to TM 600, plus the later procurement of a pin mill. MPT always aims to provide environmentally friendly machinery and equipment to various fields of industry, thus, rather than using the traditional method to produce rice powder, which involves washing and soaking the rice, draining it, laying it out and then grinding it, turbo mill TM 400 and 600 are designed to eliminate the water handling process. At the beginning, the owner was concerned about the generated heat during grinding, since it may affect the texture of rice noodles made with the powder. In the end, the result showed that MPT's machine performs well. Without water handling processing, the grinding process is cost-saving and more efficient.

For rice powder buyers, their fondness for Mr. Wang's rice powder is because of its high quality. They are able to use the powder to make chewy rice noodles with great taste, as well as Chinese and Vietnamese noodles, turnip cakes, bread, rice pancakes, or any foods that require gluten-free. Overall, Mr. Wang is thrilled with MPT's powder handling processing equipment and is willing to invest more to expand his business in the future.

In Canada, Mill Powder Tech (MPT)'s impact classifier mill is sold to Confiseries which is a sugar company that is specialized in providing sugar products. They purchased ICM-750 powder processing equipment turnkey system in Nov, 2012 for making maple sugar powder, which is a famous sugar made from Canada's maple trees. They requested 300-400 kg per hour of production capability and 300 mesh of powder fineness. MPT was able to meet their requirements with great performance.

Mill Powder Tech (MPT) broke through difficulties in developing an impact knife mill that would solve spice and herb's grinding dilemmas. Due to various factors (environmental, equipment, human operation), spice and herb powder handling processing equipment can result in low quality powders. With MPT's innovative design, spice's temperature is controlled, color is sustained, productivity is increased and the price is reasonable.

Impact knife mill is great for small and medium enterprises who wish to deliver high performance ground herbs, roots and spices. It is also cost-saving, with high production capacity and easy maintenance. Impact Knife Mill (IKM-310)

For some herbs, their roots and seeds can make the grinding process tricky, in the end, the odor can be lost, the color can be faded and the root can be very difficult to cut. They can wear the powder equipment out and the whole powder handling process becomes costly and inefficient.

Because impact knife mill's reasonable price, for powder suppliers who wish to sell great selections of species, it is affordable to buy several impact knife mills at once. It does not only save your time for cleaning and switching equipment, also avoids the chance of contamination.

In Bangladesh, ACI Limited and Square Group are both leading companies in pharmaceutical, food, construction, daily product industries. Their procurement of MPT's spice grinding systems proved their #1 selection of powder mill supplier.

The subsidiaries, ACI Foods Limited, is selling pure spices, including chili powder, turmeric powder, coriander powder and cumin powder. SQUARE Herbal & Nutraceuticals Ltd. has attained the core confidence of health care providers with the highest quality herbal products of purely eastern and western origin, as well as meeting ever expected efficacy and safety based on international standards.

"Good grinding processing equipment should be able to retain the odor of spice in its own place, leaking smell shows failure of the process. Our more than 70 years of powder mill experience has allowed us to develop outstanding blades to handle any kind of materials.", Tony Ling, a sales manager of MPT claimed.

The grinding method of conventional grinders utilizes collision, cutting, and friction to accomplish the goal of powder refinement, typically such method produces from impact surface that contaminates the out-put material. When required particle fineness is in high micron, the contamination becomes worse. On the other hand, a capable JET MILL delivers refined powder without contamination, however it presents the problem of high energy consumption and inefficiency out-put performance. Thus, Mill Powder Techs combined the advantages of the two grinding methods, without the problematic impurity issues, and creates Cyclone Mill.

Mill Powder Tech (MPT), based in Tainan, Taiwan, was founded over 70 years ago and specializes supplying industrial powder handling process equipment. Today, with 12 agents and 30 distributors located globally, MPT has sold their grinding equipment to over 70 countries. As a prominent size reduction solutions provider, more than 40 types of machines are ready to serve you with solid technology.

MPT started providing animal feeding-stuff and food size reduction equipment in 1940. In 1975, MPT developed the 1st turbo mill prototype after years of collected experience, in 2004, MPT expanded their market worldwide with outstanding patented powder processing equipment and turnkey project design targeting in material grinding, mixing and crushing.

To compete with the powder processing equipment from Europe and Japan, MPT designs GMP and CE certified powder processing equipment in a cost-effective manner. In addition, they also deliver environmentally friendly designs to meet market trends.

MPT's powder grinding machine meets 80% customers' requests, and to fulfill the needs of other clients who wish to grind what normal equipment can't, MPT is going one step further, delivering custom-made and smart turnkey projects.

"Our goal is to design powder handling equipment that is flexible, integrated, cost-effective and productive; in the end, their business is profitable based on over 70 years of seasoned engineering experience." said the Sales Manager of Mill Powder Tech.

With more than 70 years of experience, Mill Powder Tech's powder processing equipment is highly recommended if you wish to supply fine powders. The powder's temperature is controlled, color is sustained and productivity is increased when using MPT's machine. Turbo mills, blenders, pin mills, impact classified mills, cyclone mills, hammer mills, powder grinders, cutting crush machines, bread crumb grinders, vertical mills, peanut milling machines and sesame milling machines with more than 40 types of equipment is ready for you to choose. Industrial blenders and mixers, temperature controlling, pulverizers and vibratory feeders are integrated into material powder handling systems for complete processing.

Mill Powder Tech (MPT) started providing animal feeding-stuff and food size reduction equipment in 1940. In 1975, MPT developed the 1st turbo mill prototype after years of collected experience, in 2004, MPT expanded their market worldwide with outstanding patented powder processing equipment and turnkey project design targeting in material grinding, mixing and crushing. If you are looking for a powder handling expert, look no further than Mill Powder Tech from Taiwan. They've handled hundreds of materials that are involved in various industries including chemical, food, pharmaceutical, plastics & rubber, mineral, recycling, etc. Send MPT an inquiry now!

Ready-Online.com websites (collectively Ready-Online.com) refer to sites hosted on the Ready-Online.com domains and subdomains thereof. Ready-Online.com website provides a platform for MILL POWDER TECH (MPT) to showcase their stories and products in order to attract visitors with product inquiries. When visitors send inquiries, information obtained in connection with the site may be used by MILL POWDER TECH (MPT). Ready-Online.com regularly collects and processes information about visitors who use the website and inquiry form which we operate and control, and for which we may be deemed to act as the Data Controller.

Certain visitors choose to interact with Ready-Online.com in ways that require Ready-Online.com to gather personally-identifying information. The amount and type of information that Ready-Online.com gathers depends on the nature of the interaction. We collect, process and use your personal data for specific purposes if you have given your consent to the collection, processing and use of specific personal data for such purposes. You may withdraw your consent any time.

The types of personal information may include: Company name, contact name, job title, company website, country, business type, email, telephone number, fax number, address.Cookie:There is a technology called "cookies" which is an element of data that a website can send to your browser which may then store on your system. Some Site pages use cookies so that we can better serve you when you return to our Site. You can set your browser to notify you when you receive a cookie, giving the chance to decide whether to accept it.We use Tract ID (cookies) to collect and store information when you visit our website; the information is saved at Amazon Web Services (AWS) and used to identify your browser or device.Cookies do not harm your computer and do not contain any viruses. Cookies help make our website more user-friendly, efficient, and secure. Cookies are small text files that are stored on your computer and saved by your browser. Using cookies enables us to provide you with certain features and provides us with information regarding website visits.Web analysis with Google AnalyticsWe use Google Analytics to analyze user activity in order to improve the Website. For example, using Cookies we can look at aggregate patterns like the average number of searches that users perform, what keywords users searched, countries and languages. We can use such analysis to gain insights about how to improve the functionality and experience of the website. You can visit Google Analytics Privacy Policy Privacy Policy at: https://policies.google.com/technologies/cookies.Your Information Collected from Other TechnologiesBesides Cookie, we use other technologies to improve your user experience and the overall quality of our services by collecting the information below:[site visitor] visited website (URL) [site visitor] IP Address [site visitor] Internet Connection Device Brand, Model and OS [site visitor] Internet Connection Device Browser, Resolution, Color [site visitor] GeoIP [site visitor] ISPHow We Use Your Personal InformationOur client will supply information on products or any other professional information based on inquiries received. Without your explicit consent or a legal basis, your personal data or browse history is not passed on to third parties outside the scope. Part of the data is collected to ensure the proper functioning of the website. Other data can be used to analyze how visitors use the site.Information, Blocking, DeletionAs permitted by law, you have the right to be provided at any time with information free of charge about any of your personal data that is stored as well as its origin, the recipient and the purpose for which it has been processed. You also have the right to have this data corrected, blocked or deleted. You can contact us ([email protected]) at any time using the address given in our legal notice if you have further questions on the topic of personal data.All the collected information is saved for 24 months on Amazon Web Services (AWS) and regularly deleted every month.The Protection of Your Personal DataYour personal data is stored on Amazon Web Services (AWS). AWS Announces CISPE Membership and Compliance with First-Ever Code of Conduct for Data Protection in the Cloud.Information SecurityWe use standard security technology SSL or HTTPS standard technology for keeping an internet connection secure and safeguarding any sensitive data that is being sent between two systems, preventing criminals from reading and modifying any information transferred, including potential personal details.Changes to This Privacy PolicyWe may update this Privacy Policy to reflect changes to our information practices. If we make any material changes we will notify you by email (sent to the e-mail address specified in your account) or by means of a notice on this website prior to the change becoming effective.Contact UsIf you have any questions about the website, cookie, Google Analytics, please contact:[email protected] you have any questions about inquiry content or personal information, please contact:[email protected] 171, Jheng Bei 3rd Road, Yong Kang District, Tainan City 71043, Taiwan

There is a technology called "cookies" which is an element of data that a website can send to your browser which may then store on your system. Some Site pages use cookies so that we can better serve you when you return to our Site. You can set your browser to notify you when you receive a cookie, giving the chance to decide whether to accept it.

Cookies do not harm your computer and do not contain any viruses. Cookies help make our website more user-friendly, efficient, and secure. Cookies are small text files that are stored on your computer and saved by your browser. Using cookies enables us to provide you with certain features and provides us with information regarding website visits.

We use Google Analytics to analyze user activity in order to improve the Website. For example, using Cookies we can look at aggregate patterns like the average number of searches that users perform, what keywords users searched, countries and languages. We can use such analysis to gain insights about how to improve the functionality and experience of the website. You can visit Google Analytics Privacy Policy Privacy Policy at: https://policies.google.com/technologies/cookies.

Besides Cookie, we use other technologies to improve your user experience and the overall quality of our services by collecting the information below:[site visitor] visited website (URL) [site visitor] IP Address [site visitor] Internet Connection Device Brand, Model and OS [site visitor] Internet Connection Device Browser, Resolution, Color [site visitor] GeoIP [site visitor] ISPHow We Use Your Personal InformationOur client will supply information on products or any other professional information based on inquiries received. Without your explicit consent or a legal basis, your personal data or browse history is not passed on to third parties outside the scope. Part of the data is collected to ensure the proper functioning of the website. Other data can be used to analyze how visitors use the site.Information, Blocking, DeletionAs permitted by law, you have the right to be provided at any time with information free of charge about any of your personal data that is stored as well as its origin, the recipient and the purpose for which it has been processed. You also have the right to have this data corrected, blocked or deleted. You can contact us ([email protected]) at any time using the address given in our legal notice if you have further questions on the topic of personal data.All the collected information is saved for 24 months on Amazon Web Services (AWS) and regularly deleted every month.The Protection of Your Personal DataYour personal data is stored on Amazon Web Services (AWS). AWS Announces CISPE Membership and Compliance with First-Ever Code of Conduct for Data Protection in the Cloud.Information SecurityWe use standard security technology SSL or HTTPS standard technology for keeping an internet connection secure and safeguarding any sensitive data that is being sent between two systems, preventing criminals from reading and modifying any information transferred, including potential personal details.Changes to This Privacy PolicyWe may update this Privacy Policy to reflect changes to our information practices. If we make any material changes we will notify you by email (sent to the e-mail address specified in your account) or by means of a notice on this website prior to the change becoming effective.Contact UsIf you have any questions about the website, cookie, Google Analytics, please contact:[email protected] you have any questions about inquiry content or personal information, please contact:[email protected] 171, Jheng Bei 3rd Road, Yong Kang District, Tainan City 71043, Taiwan

[site visitor] visited website (URL) [site visitor] IP Address [site visitor] Internet Connection Device Brand, Model and OS [site visitor] Internet Connection Device Browser, Resolution, Color [site visitor] GeoIP [site visitor] ISPHow We Use Your Personal InformationOur client will supply information on products or any other professional information based on inquiries received. Without your explicit consent or a legal basis, your personal data or browse history is not passed on to third parties outside the scope. Part of the data is collected to ensure the proper functioning of the website. Other data can be used to analyze how visitors use the site.Information, Blocking, DeletionAs permitted by law, you have the right to be provided at any time with information free of charge about any of your personal data that is stored as well as its origin, the recipient and the purpose for which it has been processed. You also have the right to have this data corrected, blocked or deleted. You can contact us ([email protected]) at any time using the address given in our legal notice if you have further questions on the topic of personal data.All the collected information is saved for 24 months on Amazon Web Services (AWS) and regularly deleted every month.The Protection of Your Personal DataYour personal data is stored on Amazon Web Services (AWS). AWS Announces CISPE Membership and Compliance with First-Ever Code of Conduct for Data Protection in the Cloud.Information SecurityWe use standard security technology SSL or HTTPS standard technology for keeping an internet connection secure and safeguarding any sensitive data that is being sent between two systems, preventing criminals from reading and modifying any information transferred, including potential personal details.Changes to This Privacy PolicyWe may update this Privacy Policy to reflect changes to our information practices. If we make any material changes we will notify you by email (sent to the e-mail address specified in your account) or by means of a notice on this website prior to the change becoming effective.Contact UsIf you have any questions about the website, cookie, Google Analytics, please contact:[email protected] you have any questions about inquiry content or personal information, please contact:[email protected] 171, Jheng Bei 3rd Road, Yong Kang District, Tainan City 71043, Taiwan

Our client will supply information on products or any other professional information based on inquiries received. Without your explicit consent or a legal basis, your personal data or browse history is not passed on to third parties outside the scope. Part of the data is collected to ensure the proper functioning of the website. Other data can be used to analyze how visitors use the site.

As permitted by law, you have the right to be provided at any time with information free of charge about any of your personal data that is stored as well as its origin, the recipient and the purpose for which it has been processed. You also have the right to have this data corrected, blocked or deleted. You can contact us ([email protected]) at any time using the address given in our legal notice if you have further questions on the topic of personal data.

We use standard security technology SSL or HTTPS standard technology for keeping an internet connection secure and safeguarding any sensitive data that is being sent between two systems, preventing criminals from reading and modifying any information transferred, including potential personal details.

We may update this Privacy Policy to reflect changes to our information practices. If we make any material changes we will notify you by email (sent to the e-mail address specified in your account) or by means of a notice on this website prior to the change becoming effective.

wood powder making machine/wood flour mill/wood powder machine--zhengzhou zhongmian merchinery equipment co.,ltd

wood powder making machine/wood flour mill/wood powder machine--zhengzhou zhongmian merchinery equipment co.,ltd

Wood powder machin is a high-tech home and abroad advanced technology with newly developed a new type of ultra-fine wood powder equipment, machine combines traditional wood powder machine home and abroad, crushing principle of innovation, from the traditional principle of a crush The wood powder machine, through our scientific research personnel of the bold vision, and a variety of grinding principle home and abroad successfully developed into a set of three kinds of crushing principle as one of the efficient energy-saving wood flour mill, machine with a fineness analyzer is specialized in lightweight materials, fiber materials, brittle materials, ductile materials such as crushed new special milling equipment difficult. Machine inlet feed using self-priming,Holding on safety in production, replacing the traditional direct mill feed, careless piece of metal into wood powder machine as well as serious damage to the shortcomings. Machine production of fine, high processing technology, using double the body, cooling the body play a role into the water, into a new material, play a sound, heat function. Therefore, the use of aircraft noise in the production, no vibration.Wood powder machine Application:

Wood powder machine applies to the following materials smash: Bamboo powder, shell, herbs, bark, leaves, wheat bran, konjac, Xuan Ma, rice husk, corn cob, straw, starch, food type, shrimp, fish meal , shells, seaweed, dehydrated vegetables, hawthorn, ginger, garlic, pumpkin powder, spices, jujube, paper, circuit boards, plastic, chemical raw materials, water products, spices, feed, mica, graphite, bentonite, perlite, Lees,Furfural, cake, charcoal, activated carbon, cellulose, potato residue, tea, hair, soybean, cotton, refined cotton, cowhide, sheepskin, plant root, stem, leaf, flower, fruit, hundreds of all kinds of edible fungi and other difficult characteristics of materials processing, chemical, building materials, medicine, health, culture, food, mosquito coils and other industries in the ideal grinder.

Wood powder machine works:1, Wood powder machine from the body, the body and lower body three parts wood flour machine.2, Grinding tool, 7-type knife, a cutter-type knife and centrifugal component.3, Wood powder machine by the machine have to pay; fan, powder collector, dust composition.4, Host a 7-type knife grinding chamber, a centrifugal-type knives and knife, a rough grinding, fine grinding and centrifugation to resume crushing mill driven by the motor rotor high-speed operation, to produce high-speed gas flow on the grinding machine produces high-strength materials impact force, compressive force, cutting force, friction and grinding to achieve a unique function.

5, The three blade cutting wood powder machine grinding process, the rotor blades produce high-speed air flow with the direction of rotation, the material in the air flow speed and repeated shocks, cutting friction, while the role by three crushed, be crushed with the flow of materials into the analyzer for analysis, due to centrifugal force by the analyzer rotor role Shiyou centripetal force by air, so when the centrifugal force is greater than the centripetal force, the fine particles with air into the powder collector to collect, coarse particles smash into the centrifuge to recovery room to smash up to achieve the fineness of your satisfaction.

Zhengzhou ZHONGMIAN Merchinery Equipment Co.,Ltd All rights reserved E-mail : [email protected] Tel0086- AddressWest Economic Development Zone, Zhengshang Road, Zhengzhou City, Henan Province, China

ultrafine powder grinding & classifying technology - expert in high-value treatment of calcium carbonate

ultrafine powder grinding & classifying technology - expert in high-value treatment of calcium carbonate

The processing of ground calcium carbonate is simply the process of using crushing and grinding equipment to process calcium carbonate minerals into various powders that can meet the requirements of industrial applications. Because different industrial applications have different requirements on the particle size, shape, whiteness and particle size distribution of ground calcium carbonate powder, the processing technology of ground calcium carbonate should also comprehensively consider the process route and equipment selection according to the product positioning. Generally speaking, the design of grinding equipment is based on different principles: impact, extrusion, friction, shear and combination of various forces, etc. Different designs will have different grinding effects and product fineness.

The common processing equipment of ground calcium carbonate produced by large-scale dry process includes Raymond mill, Vertical mill, Ring roller mill and Ball mill. Due to the different crushing principle and discharging method of the equipment, the processed powder has great differences in grain type, particle size distribution and unit energy consumption, so the positioning of the product also has obvious differences.

The ball mill can cooperate with the air classifier to form a closed-circuit circulation system, after the grading of the coarse powder can be returned to the ball mill for re-grinding, and the Raymond mill, vertical mill, vibration mill due to the capacity of the mill is very limited, return difficult, unable to form a closed-circuit circulation system, to return to the treatment of problems.

The ball mill is also a low speed operating equipment, impact and friction energy consumption to minimize. Therefore, it is not only an ideal choice for grinding high hardness, abrasive mineral raw materials, but also the most economical choice for grinding white filler minerals such as low hardness calcium carbonate.

It can be seen from the particle size distribution map that the particle size distribution of the grinding products of the ball mill is the widest. Through the air classifier, the products with different fineness requirements can be separated. At the same time, the output of the ball mill is large, with scale effect, so it has a strong market adaptability and competitiveness.

The production line adopts the international popular continuous production process: ball mill and air classifier system. The technological process mainly includes crushing (generally using two-stage crushing), grinding, classifying, packaging, magnetic separation, transportation, lifting, etc. After the ball mill can be parallel or series multiple classifier at the same time to produce more than one size of the product.

Working principle: The raw material is fed into the hollow cylinder through the hollow shaft neck for grinding. The cylinder is equipped with grinding media of various diameters (steel ball, steel bar or gravel, etc.). When the cylinder rotates around the horizontal axis at a certain speed, the medium and raw materials in the cylinder under the action of centrifugal force and friction force, as the cylinder reaches a certain height, when its own gravity is greater than the centrifugal force, it will escape from the cylinder body wall and drop or roll down, smashing the ore due to the impact force. At the same time, the sliding motion of the grinding medium also produces grinding effect on the raw material during the rotation of the mill. The ground material is discharged through a hollow journal.

Raymond mill is the earliest and most widely used grinding equipment in China, with low fineness, suitable for the production of 400 mesh of coarse ordinary powder. A small amount of 500 ~ 1250 mesh products can be obtained through secondary classification. Suitable for large scale production of coarse powder and small scale production of fine powder.

Working principle: Raymond mill rollers works under the action of centrifugal force tightly on the ring rolling, the shovel knife scooping up material to the grinding roller and grinding ring in the middle, the material under the action of ground pressure, broken into powder, and then under the action of fan blow into powder material up through analysis of machine, to fulfill the requirements of fineness of materials through the analysis of machine, cant meet the requirements of the return to continue to grinding, grinding chamber through the analysis of the material into the cyclone separation of machine to collect. Use industrial press cloth to separate the air exhaust into powder.

Vertical mill is a typical material layer extrusion crushing equipment, the most fine can reach 1250 mesh, through the second, third classification of the most fine can reach to 3000 mesh, generally suitable for mohs hardness of less than 7 materials.

Working principle: The motor through reducer driven in mill, material from the feed opening fell into a grinding disc, move to the edge of mill under the action of centrifugal force and grinding roller of roller compaction, shredded material from mill edge overflow, at the same time from the nozzle ring (ring) wind speed up stream to efficient separator, which is one with vertical mill meal after separator is returned to the mill wheel, grinding again; The fine powder is ground with the air flow and collected in the dust collecting device of the system, which is the product. Coarse granular materials not taken up by the hot gas flow and accidental entry of metal parts sink from the wind ring, after scraping out by the scraper, through the external circulation of the bucket machine feeding into the grinding again grinding.

As the roller is small and many, the fit clearance with the grinding ring is also small, the most fine grinding can be up to 2500 mesh. Low energy consumption and low fine powder content. Generally suitable for mohs hardness below 5, narrow particle size (low oil absorption value), moderate fineness of materials. But forhard materials, if they are light color (white), the degree of dialogue has a great influence.

Working principle: It adopts the principle of impact, extrusion and grinding to crush the material. There is a large active gap between the grinding ring and pin shaft installed on the grinding ring bracket. When the grinding ring bracket rotates with the spindle, the grinding ring is swung to the grinding ring by centrifugal force, and the inner wall of the grinding ring is pressed and rotates around the pin axis. When the material passes through the gap between the grinding ring and the grinding ring, it is impacted, squeezed and ground by the grinding ring. Under the action of gravity, the crushed material falls into the swing plate and is then thrown into the air flow into the grading chamber for classification. The qualified fine powder is collected through the grading wheel into the rear passage collection system, and the coarse material is thrown into the shunt ring for internal avoidance, and then falls back into the crushing chamber for crushing. The grinding ring is single layer or upper and lower double layer distribution. When the double-layer grinding ring crusher works, the material is crushed again when passing through the gap between the second grinding ring and the grinding ring.

powder mill, powder grinding mill - all industrial manufacturers - videos

powder mill, powder grinding mill - all industrial manufacturers - videos

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

... edges of the rotor and the fixed knives in the grinding chamber until the desired final fineness is achieved. Unique grinding chamber geometry: The grinding chamber is designed with minimal dead space and progressive ...

... time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular ...

MTW-Z European Trapezium Mill Mature technology, Advanced idea, High productivity MTW-Z European Trapezium Mill is new product researched and developed by LIMING based on ordinary European type ...

5X Pendulum Roller Grinding Mill Thin-oil lubricating system, Elastic damping structure 5X Series Pendulum Roller Grinding Mill is new mature and advanced equipment. This machine adopts automatic ...

... ceramics. Learn More About Liming LM Vertical Mill 1. Low Investment Cost. This mill itself can crush, dry, grinding, classifying, so the system is simple, and occupation area is about 50% of ...

... .B. Bohle Hammer Mill Hammer or turbo mills are suitable for research and development, as well as for batch production or continuous manufacturing. They are used for the milling of powders, ...

... recording and formulation management Operator management with password protection for different levels of security Laboratory mills can be used with variable grinding chamber sizes Various materials like NETZSCH-Ceram ...

... forced through the pulverizer (pulveriser) discs to the outer chamber for discharge with a down stream material transport system. Neue Herbold ZM series pulverizers (pulverisers) operate without a screening ...

Installed at silos, hoppers or tanks extraction, it enables the crumbling of powdered product agglomerated after prolonged storage in order to facilite its evacuation. The CRUSHER enables these products to flow more easily. It is available ...

... material hardness value: from Mohs' hardness 1 (talc) to Mohs' hardness 10 (diamonds). Fluidised bed opposed jet mill for manufacturing powders with a steep particle size distribution and sharp top ...

... containment of dust and particles Clam shell dust enclosure provides quick and easy, no tools access 3 blade open rotor with rotary side walls Solid dowel and bolted construction Locking swivel casters ...

The Rapid RG Series is specifically designed for beside-the-press recycling of hard and brittle materials. The ultra-slow rotor speed and screenless operation provide low noise level and very low dust level even with ...

The BioPulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Because of the high water content, most fresh tissue becomes as brittle as glass at liquid nitrogen temperatures. A sharp blow with a hammer ...

Consistent performance Wear-resistant mechanism Wide range of applications Low maintenance, space-saving design Dust-free operation Fineness:10~325Mesh (data is for reference only & may vary according to raw material).

Micro Powder Grinding Mill Processing ability: - 0.2-45t/h Max feeding size: - 25mm Product Fineness: - 325-3000Mesh Range of application: - Barite, quartz, feldspar, mica, calcite, talc, apatite, ...

HIGH PERFORMANCE TURBO MILLS Technical Specifications Rotor speed: 7500 rpm Grinding chamber diameter: 220 mm Motor Power: 5.5 kw Electric connections: 3 ph 380 V 50Hz Production capacity: 300 ...

IMD 1060 FT MODEL IMD 1060 FT ULTRAFINE SUPERNOVA SERIES COFFEE GRANULIZER Application Ultrafine (50 125 um): Up to 2,200 lb/hr (1,000 kg/hr) Fine (125 175 um): Up to 2,650 lb/hr (1,200 kg/hr) Capacity Up to 2,650 lb/hr ...

... 50 m/h. Our lump breakers are the perfect solution for grinding materials that tend to form lumps. The lump crusher allows to break the lumps that form during the production or transportation process of friable materials ...

CHAENG GRMS slag vertical roller mill integrates the functions of fine crushing, grinding, drying, powder selecting and conveying, with the advantages of high grinding. The material through the feed ...

The KEK Universal Mill provides high-energy one-pass fine grinding. Available with a variety of interchangeable grinding media, the KEK Universal Mill is capable of unsurpassed, versatile milling performance ...

china mushroom powder making machine manufacturers, suppliers, factory - mushroom powder making machine price - brightsail

china mushroom powder making machine manufacturers, suppliers, factory - mushroom powder making machine price - brightsail

Weprovideprofessionalpowderprocessingoverallsolution,grinder,mixer,sifter,weldingservice,weldingmachine,chemicalpowder...etc.Wehavesentourproductstomorethan50countriesaroundtheworldfornow.

we are a legal company supervised by the government and also the Alibaba company as well as the third parties, what is more important, honesty and trustworthiness are our basic principle. Please trust us that we will offer the best to our client you.

powder grinding mill|grinding machine

powder grinding mill|grinding machine

Powder grinding mill is suitable for grinding non-flammable and non-explosive materials whose Mohs hardness is below 9.3 and humidity less than 6% such as barite, limestone, ceramics and slag in mine, metallurgy, chemistry and building material industry and the granularity of the final products can be adjusted between 80 and 425 meshes. The machine can produce coarse powders of 30-80 mesh through the special device inside the machine.

1. The main parts use fine steel materials and the wear-resistant parts use high performance wear-resistant materials, so that the whole machine has high wear-resisting property and reliable operation.

Inside the powder grinding mill, there is a high pressure spring with 1000-1500 kilos of pressure on the cradle of the grinding roller. When this machine begins to work, the grinding roller rotates around the principal axis, and under the high pressure spring and centrifugal force, the grinding roller will roll to the grinding ring, and the pressure is 1.2 times higher than that of Raymond mill, so that the output is greatly improved. When the materials to be ground go into the grinding chamber, they are scooped up by the scraper knife and sent to the space between the grinding roller and the grinding ring for grinding, and the ground powders are brought to the analytical engine with the recirculating air of the blower, and the qualified fine powders flow into the cyclone powder collector with the air flow to become final products and the coarse powders will fall to the grinding mill for re-grinding.

Parameter Model Raymond mill62 High strength66 High strength76 High strength87 High strength92 High strength93 High strength97 Raymond mill4119 Raymond mill4525 Feeding sizemm 15 15 20 25 25 25 25 25 30 Sizeoffinished productmm 0.173-0.033 0.173-0.033 0.173-0.033 0.173-0.033 0.173-0.033 0.173-0.033 0.173-0.033 0.173-0.044 0.173-0.044 Shiftoutputof differentmaterial fineness(t) 0.6-9 1-20 1.5-25 2.8-33 3-36 3.5-40 4-52 8-78 16-176 Rotatespeed ofcentral shartr/min 274 190 170 161 148 140 130 105 82 Diameterof pulverizing ringmm 525 725 850 907.5 973 1006 1050 1400 1770 Diameterof pulverizing ringmm 150 210 250 270 300 300 310 410 450 Heightof pulverizing rollermm 100 150 150 150 160 160 170 190 250 MainMotor 7.5 15 18.5 22 30 30 37 75 132 FanMotor 4-5.5 4-11 4-15 4-18.5 4-22 30 4-37 90 4-132 AnalyzerMotor 6-1.1 6-2.2 6-2.2 6-2.2 6-2.2 6-3 4A-5.5 4B-7.5 4A-18.5

cs-z fine cutting mill - netzsch grinding & dispersing

cs-z fine cutting mill - netzsch grinding & dispersing

By maximizing the cutting strokes (rotational speed of the rotor x number of rotor knives x number of stator knives) and the use of special screen inserts, highest finenesses can be achieved with this multi-knife cutting mill. The open rotor design increases the air flow, the results of which are a high throughput capacity, good powder quality and the highest bulk density.

NETZSCH Trockenmahltechnik GmbH, one of the global leading companies in the area of dry product processing, is part of the Business Unit Grinding & Dispersing of the NETZSCH Group. Customers profit from our comprehensive experience potential and our diverse machine program, ranging from laboratory- and production machines to complete production lines. Fine impact mills, classifying- and jet mills as well as fine-cutting mills and high-efficiency fine classifiers made by NETZSCH are mainly used in the application areas chemistry, inorganic materials/minerals, ceramics and life science for pharma- and food applications.

The demands placed by the manufacturing industry on the technical design of mechanical plants and processes are getting tougher all the time. Gas-tight or surge pressure-resistant designs are already a must for most plant and machinery to ensure compliance with the latest regulations. New product qualities and/or methods of production also enlarge the portfolio of requirements, for example in the cellulose processing sector.

The fast operating fine cutting mills SecoMy S are the choice for the pulverization of fibrous, ductile, soft, viscoplastic or temperature-sensitive products. In contrast to classic cutting mills, final finenesses of up to 45 m can be reached in a one-step process with the SecoMy S.

The fast operating fine cutting mills SecoMy are the choice for the pulverization of fibrous, ductile, soft, viscoplastic or temperature-sensitive products. This type of cutting mill distinguishes itself through the optimization of number and position of the knives and the high cutting stroke rate.

The mechanical fine impact mill or centrifugal mill is usually operated in the form of a pin disc mill, blast mill, wing beater mill or grooved disc mill. Many products and finenesses for a wide variety of applications are processed with the universal mill, with a wide range of rotor and stator combinations that can be easily changed. Applicable for finenesses from 30 to 800 m (d97).

The dynamic air classifier integrated into the grinding chamber housing of this fine impact mill manufactures fine particle sizes with a defined maximum particle size limitation. Internal classification of the coarse material results in a more stable and energy efficient process than a mill with an external classification circuit. Applicable for finenesses from 10 to 150 m (d97).

We use cookies in order to design our websites optimally for you. Some of them are technically necessary, while others help us to improve this website and your experience. You are free to decide which categories you would like to permit. Please note that depending on the settings you choose, the full functionality of the website may no longer be available. Further information can be found under Cookie Details.

These cookies are essential in order to enable you to move around the website and use its features, such as setting your privacy preferences, logging in or filling in forms. Without these cookies, services requested through usage of our website cannot be properly provided.

In order to continuously improve our website, we anonymously track data for statistical and analytical purposes. These cookies collect information about how visitors use a website, for instance which pages visitors go to most often, and how visitors move around the site. They help us to improve the user friendliness of a website and therefore enhance the users experience.

Related Equipments