products and equipment from agritel ltd on environmental xprt

environmental xprt - the environmental industry online

environmental xprt - the environmental industry online

Cassinelli Landscaping & Construction first got its beginnings in 1975 by installing tract sprinklers in Carson City, Nevada. As the years progressed, the company soon expanded into working in the commercial market, installing landscape areas for convenience stores, grocery stores, and fast-food restaurants. In 2021, the company has since moved from Carson City to Dayton. The company is known ...

WEF is moving the Forum on Particles and Colloids, initially scheduled for July 2021, to January 2022. This event brings together a small group of water professionals worldwide to foster far-reaching and in-depth discussions on a specific topic of interest in an in-person format. The WEF Forum brings a small group of about 150 water professionals together to foster far-reaching and in-depth ...

products and equipment from ion science ltd. | environmental xprt

products and equipment from ion science ltd. | environmental xprt

Portable gas detectors, classed as a type of Personal Protective Equipment (PPE), are designed to keep personnel safe from atmospheric gas hazards and allow mobile testing of locations before they are entered. These handheld devices are essential in many areas where gas hazards could occur, because they are continuously monitoring at close range to the operator, whilst stationary and moving.

The Tiger handheld VOC gas detector is a revolutionary handheld, portable PID instrument for rapid, accurate detection of volatile organic compounds (VOCs). Our handheld VOC gas detector incorporates ION Science patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design, proven to dramatically extend run time in the field.

Tiger LT portable VOC gas detector is an entry-level handheld, portable VOC gas detector that provides you with fast, accurate, reliable results, however challenging your environment. The Tiger LT portable VOC gas detector is a variant of the hugely popular Tiger, but low on cost and high on performance. Its revolutionary, patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design provides...

The Tiger Select is a portable benzene gas detector with two operation modes for rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data. Tiger Select portable benzene gas detector is capable of providing 15-minute short-term exposure limits (STELs) and 8-hour time-weighted averages (TWAs) for total aromatic compounds (TACs).

The GasCheck handheld helium gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m or ppm levels. Designed for the search and location of gas leaks, the GasCheck handheld helium gas leak detector provides you with effective detection of almost any gas or gas mixture. Robust and...

The GasCheck Tesla portable helium leak detector is a highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners. GasCheck Tesla portable gas leak detector can be used on an MRI scanner whilst in operation, meaning interruptions to the machinery are avoided. Helium leaks are found quickly reducing cost, wastage, and downtime of the machinery.

The instruments dual beam UV absorption technology means that the portable mercury vapour detector does not saturate or need regenerating between readings like traditional gold film detection methods eliminating instrument downtime. Fast and accurate, the portable mercury vapour indicator gives a real-time response and is ready to detect instantly. MVI provides continuous readings and offers two detection ranges: 0.1 to 199 and...

The SF6Leakmate, portable SF6leak monitor is a great device for mobile SF6leak detection. In practical use, it has a detection threshold of 1 x 10E-6 mbar l/s, which makes it perfectly suitable for simple leak detection applications on SF6switchgear. The easy to use, processor controlled portable...

Personal gas detectors keep workers safe from atmospheric hazards by continuously monitoring the users breathing zone, these detectors operate at close range to the user. Our range of personal gas detectors and monitors will allow you to operate in the toughest of industrial environments including hazardous areas and confined spaces.

The Cub 11.7 eV personal VOC gas monitor is worn within the breathing zone to detect volatile organic compounds, keeping you safe within your working environment. The Cub 11.7 eV is the worlds smallest and lightest wearable VOC gas detector. When worker exposure exceeds pre-set limits Cubs audible, vibrating, and flashing LED alarms alert you to the gases present. Readings are displayed on its bright, back-lit LCD display with selectable data...

The Cub 10.6 eV personal VOC gas detector is worn within the breathing zone to detect volatile organic compounds, keeping you safe within your working environment. The Cub 10.6 eV is the worlds smallest and lightest wearable VOC gas detector. When worker exposure exceeds pre-set limits Cubs audible, vibrating, and flashing LED alarms alert you to the gases present. Readings are displayed on its bright, back-lit LCD display with selectable data...

Cub TAC 10.0 eV personal benzene gas monitor for fast, accurate detection of total aromatic compounds (TACs) keeping you safe within your working environment. When worker exposure exceeds pre-set limits, the Cub TAC 10.0 eV personal benzene gas detector has audible, vibrating and flashing LED alarms that alert you to the gases present. Readings are displayed on its bright, back-lit LCD display with selectable data logging time.

Fixed gas detectors are installed to provide continuous, area and personnel protection around the clock. The detection system is designed to alert workers of the potential danger of poisoning by toxic gas exposure. Fixed gas detectors are generally installed in large facilities and are used to both detect major leaks and as an early warning of gas leaking from a particular system.

The Falco fixed VOC Gas Detector, Diffused model, is a fixed VOC gas detector that eliminates false readings found with other competing technology and continuously detection Volatile Organic Compounds (VOCs) in hazardous areas. The Falco Diffused instrument is ideal for detecting VOCs in areas such as refineries and petrol chemical facilities.

The Falco TAC diffused is a fixed gas detector that eliminates false readings found with other competing technology and continuously detection Volatile Organic Compounds (VOCs) in hazardous areas. The Falco TAC diffused, fixed gas detector is ideal for detecting VOCs in areas such as refineries and petrol chemical facilities.

The Falco Pumped is a fixed VOC gas monitor that eliminates false readings found with other competing technology and continuously detection Volatile Organic Compounds (VOCs) in hazardous areas. The Falco pumped, fixed VOC gas monitor uses a sample line to draw samples and is ideal for use in difficult locations such as underground or in confined spaces.

Semi Portable Gas Detectors and Leak Detectors meet the diverse requirements for gas detection industries throughout the world. Our range offers an ideal solution where a temporary detection or contractual detection is required for a specific project or incident.

GasClam 2 continuous ground gas monitor collects unmanned continuous ground gas concentration data as well as parameters that are known to control it subsurface pressure, atmospheric pressure and water level.

The SF6 LeakCheck P1:p is an award winning SF6 gas leak detector that uses negative Ion Capture (NIC) technology designed for location, leak testing and measurement of SF6 leaks in high electrical switchgear. The SF6 gas leak detector rapidly detects leaks down to 1 x 10-8 ml/sec with a quick clear down of less than 1 second. The leak detector is unaffected by the exposure to large leaks and will continue to remain uncontaminated even after the...

ION Science introduce the first in our series of Application Kits. We have specifically designed conveniently packaged, off the shelf Kits specific to your VOC detection application! First in line is the Fire Investigation Kit for instant VOC detection for Fire and Arson investigation.

The ION Science Fire Investigation Kit with Tiger or TigerLT photoionisation detector (PID) has been specifically designed to provide you with all the tools for a convenient, easy-to-use solution for the detection of volatile organic compounds (VOCs) within Fire and Arson Investigation applications. Fire investigation teams are responsible for the examination and assessment of suspected arson-related sites, and further analysis of suspicious...

Ion Science calibrated leaks are small fittings that deliver a specific gas leak rate, often used to set pass/fail thresholds on leak detection systems or leak detection instruments. Each leak is made to order to your specified leak rate, gas and pressure which must be specified at placement of your order.

Calibrating your Ion Science gas detector ensures safe operation and functionality to meet your required regulations and code of practice. Our calibration kits can be purchased with demand flow or flow regulators and can be supplied with a wide variation of gas concentrations. Each kit is supplied in a robust protective case and is supplied with 600mm of pipe for convenient connection.

Cub is a personal VOC detector with photoionisation detection (PID) technology for the fast, accurate detection of volatile organic compounds, keeping you safe within your working environment. With market leading parts-per-billion (ppb) sensitivity, Cub sets the standard in personal gas monitoring giving an early warning of exposure to hazardous gases.

TVOC 2 is a fixed, continuous VOC monitor for the fast, accurate detection and measurement of total volatile organic compounds within industrial working environments. TVOC is a fixed continuous PID detector for the detection and measurement of total volatile organic compounds (TVOCs). Its photoionisation detection (PID) sensor capabilities utilise advanced patented Fence Electrode technology with increased resistance to humidity and contamination.

CubTACis a personal benzene detector for the fast, accurate detection of total aromatic compounds (TACs), including benzene, keeping you safe within your working environment. Comfortable and unobtrusive to wear,CubTAC is the smallest, lightest, personal TAC and benzene detector available.

The SF6 AreaCheck P2 is an award winning, highly sensitive leak detector designed for continuous area monitoring, protecting both workforce and the environment. Designed for fixed continuous SF6 area monitoring, the AreaCheck P2 with award winning Negative Ion Capture (NIC) technology rapidly detects low-level SF6 leaks. This fixed SF6 leak detector utilises relay output for immediate awareness of detected leaks and presents no cross sensitivity with...

The Tiger handheld VOC detector is a revolutionary handheld gas detection instrument for the rapid, accurate detection of volatile organic compounds (VOCs) within the harshest of environments. Tiger incorporates Ion Science patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design, proven to dramatically extend run time in the field. A robust VOC detector Tiger provides a dynamic detection...

FalcoTAC is part of the the latest generation of fixed VOC detectorsfrom Ion Science that can continuously detect Total Aromatic Compounds (TACs) using patented photoionisation detection (PID) technology.

Titan is the world's first fixed, continuous, benzene-specific monitor. Designed for petrochemical environments, Titan monitors benzene in real-time providing the ultimate device for plant and worker safety. Set to change the game in refinery applications, Titan is the first truly selective fixed benzene monitor on the market. Titan is a fixed, continuous, real-time, benzene-specific monitor designed for petrochemical environments, providing the...

The SF6 GasCheck 6000 leak detector is a great device for portable SF6 leak detection. In practical use, it has a detection threshold of 1 x 10-6 mbar l/s, which makes it perfectly suitable for simple leak detection applications on SF6 switchgear.

We manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our PID sensor technology trusted by major gas detection manufacturers, globally. Our patented PID sensor technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments.

The Sensor Development Kit offers a simple, efficient and cost-effective way to test and integrate the Ion Science photoionisation detection (PID) sensors into any system. SDK comprises two printed circuit boards (PCBs); the Sensor PCB and the Integration PCB. Both PCBs have a small footprint and can be easily fitted into existing original equipment manufacturers (OEMs) equipment and systems. A PCB mounted gas delivery hood is available which...

The Ion Science MiniPID 2 HS is a simple plug and play sensor designed to detect a wide range of volatile organic compound gases (VOCs) at sub ppb concentrations. Designed for OEMs, the MiniPID 2 HS high sensitivity PID sensor is the latest in the range of PID sensors from Ion Science for sub-ppb level detection. The ground-breaking MiniPID 2 HS is 15 times more sensitive than the existing MiniPID 2 ppb sensor. It is capable of detecting trace levels...

Our PPM sensor is designed for detecting VOCs over the widest dynamic range on the market without compromising performance. It is also the only PID sensor with a lamp out diagnostic. Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist...

Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments. The PPB sensor is optimised to...

Our entry-level BL Series strikes a balance between performance and cost. In common with all Disc Pumps. BL Series devices combine silent operation, pulsation-freeflow, millisecond response and high precision in a compact form factor.

The XP Series offers our highest performance, efficiency and widest operating temperature range of -25 to 55C to suit the most demanding applications. Our highest-performance, efficiency and widest temperature range. Tightening legislation and the growing global focus on air quality, worker safety and environmental emissions are driving the requirements for a new generation of measurement and monitoring systems. With its combination of high...

The Evaluation Kit has been designed for you to easily and rapidly test Disc Pump straight out of the box. The kit includes two pumps and all the supporting electronics/PC software to run the pump at your application requirements. Product assessment has never been easier. Disc Pump is a multi award-winning micropump platform, which is enabling innovation across sectors from medical and life sciences, to environmental and defence through wearability,...

products and equipment from aquobex ltd. | environmental xprt

products and equipment from aquobex ltd. | environmental xprt

Rapidam Tube is a temporary and recyclable flood defence that can protect a group of properties from flood risk. Easy to use, with an anti-rolling patented design and ergonomically designed handles, the dam is manufactured from high tensile PVC-coated polyester.Classified as water filled tube according to DEFRA classification of temporary flood barriers.

Aquobex first came across Aquacast when we met its inventor (Zak), from the Isle of Man at a trade show in London. Following many interesting conversations we discovered the product had many uses for flood protection as well as embankment strengthening but our key interest was how it could be used as a foundationless flood wall

Rapidam Rigid is completely removable barrier for use in floods up to 1100mm high. The barrier is easily deployed by two men and deployment is rapid.Classified as a rigid frame barrieraccording to Environment Agency (UK) classification of temporary flood barriers.

Rapidam Flexi as a portable flood barrier is the ultimate emergencyproduct where time is of the essenceand limited manpoweris a challenge. Its single-component, flexible membrane construction uses the flood water itself to provide friction and seal pressure with the ground. It is the ideal solution for the protection of critical infrastructure such as railways and highways. Classified as a free- standing barrier with flexible...

Aquafragma is a portable automatic flood barrier with robust, durable modules that are quickly and easily assembled producing a hump-like foundation across the road. The flood barrier modules are positioned horizontally whilst deadweight modules secure them in place also providing smooth slopes up and down the hump. Traffic can safely pass over the hump until flood level is about to exceed the hump crest. The gate turns upright automatically just in...

Following the success of the Floodguards barrier and with feedback from our customers Aquobex felt there was a need for a re-designed flood barrier product to address a number of needs. Removal of the back frame for heritage and listed buildings. Ability to install a flood barrier with a ground seal for zero threshold entrances. Provide a flood barrier that is suitable for window protection on listed buildings.

A new standard in steel flood proof doors. The Floodguard Steel Door is available in single or double configuration, inward or outward opening. The steel flood door can be used in all commercial applications for door openings and it can also be used as a fire exit door using discrete and low profile panic hardware. There is no fixed centre post so the full width of the double door opening can be used for access. This door has been tested to both 600mm...

The level-threshold Floodguard Heritage Door from Aquobex is the first on the market to offer a completely level threshold. Versions exist in the market with minimal thresholds but this door sets new standards in flood protection, style and ease of use. The first version of the door will address requirements to protect the UKs Grade II listed properties which sets particular challenges for our in-house engineering team. Current flood doors have...

Floodguard Clip-in Barriers were the first protective flood door barrier to enter the market and achieve Kitemark accreditation in the year 2003, having since been installed across the UK, USA, France and Netherlands. This demountable flood barrier provides the same protection as a permanent barrier, but has the distinct advantage of being fully removable when not required.

A new generation in flood protection products, Floodguard uPVC Door features an innovative, patented design with ISIS Technology. Requiring no human intervention other than closing and locking, the flood door blends into its surroundings with an aesthetically pleasing structure uncommonly found in flood defence products. ISIS Technology ensures the flood door acts as a barrier up to a predetermined height, and then allows floodwater to enter the...

When asked to provide flood protection to a number of properties in Cumbria in 2016, Aquobex discovered the cable exit points for all the electric meter boxes were broken out and created a large ingress for water straight into the cavity wall void. Using the in-house GRP manufacturing facility we have at our new premises our technicians made new moulds and manufactured these new flood barriers from scratch.

Specifically designed for flash flooding and spill defence, the pivot flood barrier is permanently positioned in areas where these events might occur with a need to be alleviated immediately. An effective solution for low-level flooding or chemical spills inside factories, even difficult areas such as lift shafts can be protected, with installation available internally or externally in commercial properties, hospitals, hotels and more.

Suitable for large-width vehicular entrances, the flood barrier is lowered into position for the duration of a flood, being retracted and hidden above the entrance when not required. A reasonable height clearance is a requirement for both internal and external mounting. The drop-down flood defence uses direct-drive electric motors to firmly lock the barrier into place, with a dead-stop breaking system for extra safety. Further flood protection...

For use in perimeter walls, the swing gate can be fixed permanently in place in preparation for flooding, simply locking into position when required. The floodgate is also available semi-permanently installed, depending on the individual needs of the flood risk to the property.

There are numerous stop-log type flood barriers available around the world, all based on a simple principle of slotting in aluminium beans into a side U-channel. Many do not have the strength to span typical width requirements without the use of a centre posts; some require centre posts at intervals as small as 1m which means that deployment time can render this type of solution as unsuitable. Aquobex offers slot-in beams which can span...

Our glass flood barriers utilise a combination of specially designed, high-strength structural glass and engineered frames designed to withstand the static and impact of the specific location. A structural anchoring system is specifically designed to be watertight with impact resisting, sealing technology. Engineered glass flood barriers are the ultimate in unobtrusive, permanent flood defence solutions and can be used in most situations where...

The Roller Shutter is a flood defence product for doors and entrances, with patented autosensing and automatic operation against flooding. The highly effective flood protection is active 24 hours a day, and operates automatically when a water level sensor detects that it is being attacked by flood water. For use on a variety of building types, infrastructure and areas of the community, this flood control product provides a highly durable solution.

Spring Dam is the result of ongoing innovation and flood control development since the year 2008. An in-situ flood defence system deployed by manual rotation, the unit retracts back into the ground when dormant, forming part of the path, roadway or equivalent. The flood barrier can be used as a single unit at an opening or a series of units forming a continuous wall.

A Germany product that we discovered which has which is similar in principle to our own Rapidam product but with different attributes and benefits, that fits into our product range. This barrier needs to be pre-installed into a purpose built trough with in-built water management to protect the barriers fabric. Cost effective, easy to install and always on site ready for deployment.

FloodBreak is a passive flood barrier for the protection of building entrances, driveway ramps, and other vulnerable paths. A revolutionary product in flood defence, the passive flood barrier uses the power of rising floodwater against itself to automatically deploy. Without the need for human intervention or power, the flood defence offers the highest levels of safety and reliability. An effective solution to the common problem of power failure...

If your home or business requires an internal tanking solution, the best (and cheapest) time to do it is when you are reinstating your property from a flood or building in a known flood plain. Its a meticulous process and ideally all internal fixtures and fittings need to be removed from inside the property. This includes fitted kitchens and even your stairs as the tanking solution needs to form a continuous seal around all the internal walls...

External tanking is the coating of a waterproof membrane to the outside of a property for protection against flood risk and water damage. Consideration should be taken where solutions are needed for construction, ground water levels, ground drainage, soil type and ground contamination. The many flood control systems for external tanking include sheet membranes, pre-applied membranes, liquid systems, spray-applied elastomeric systems and cementitious...

Technitherm is the only cavity wall insulation to pass the BRE Flood Resilience Test. Flood waters can penetrate unprotected cavity walls and cause major damage to the inner leaf, cavity wall ties, standard (fibre, polystyrene bead), cavity wall insulation materials, plaster, electrical appliances, furnishings and decorations.

Wall waterproofing is a common approach for flood risk, with such coatings as NanoShell Stone. Based on UV and high pH-resistant silicon nanoparticles, the colourless, water-repellent coating of nanoShell Stone can be applied to masonry, natural and composite stone. Lasting up to 25 years before re-application, the flood control coating maintains the original colour and texture of stone while preventing water and frost damage, mould, salts and more...

The combined flusher with a non-return valve (NRV), fronts a new and innovative design utilising a simple flood defence system that keeps sewers clean from blockages and the build up of FOG (fats, oils and greases). With the addition of a non-return mechanism, the valve self-cleans and removes blockages usually associated with regular NRVs.

Aquobex is partnering with the best-in-class flood proof kitchen providers in Europe to bring a choice of solutions to the market. To simplify the design and offer the maximum choice to the consumer the initial products will just provide flood proof carcasses. These will withstand all flood depths and flows and will not require replacement; just cleaning and (natural) drying. The consumer is then able to choose any style of doors and drawers for the...

Dragonboard can be used for all internal and external walls, floors and ceilings. It can also be used for the likes of staircases, window frames, tables and balustrades. The manganese Oxide (MO2) boards are a direct replacement for plaster boards and are suitable for most building construction situations. They are granite based so absorb very little water and they dry out in a matter of days. By using these boards instead of gypsum plaster or plaster...

The FloodBreak Vent Protector provides permanent, passive flood protection with minimal airflow disruption for vulnerable fan plants, vents and window openings, above and below ground. The passive flood barrier system is a series of buoyant louvered panels enclosed within an aluminum box and shelf structure providing protection to the designed flood elevation. As the floodwater rises, the panels float into position, lifted by the water....

Protecting a large site using conventional flood defences may be costly and impractical, so protecting individual assets may be the answer. This is by comparison much lower cost, and can be delivered without displacing large volumes of floodwater and all of the requisite planning and analysis.

Building beautiful buildings in the flood-zone is finally possible. No longer do demountable flood barriers have to be added on and potentially compromise the aesthetic or operation of a building. Enginereed for specific flood protection heights and seamlessly integrated into non-flood curtain walling above. Built-in, passive and aesthetically-pleasing flood protection. The new Floodguard Curtain Wall system is also the most cost-effective solution...

A range of flood protection products for the home. These cover both on and off-property applications including sewerage and drainage solutions. In addition, our resilient flood products are designed to get you back in your property quicker.

With a patented adjustment system, Floodgate is unique in that it does not require any permanent fittings to a property, and with no need for preparation, is extremely quick to position. When the temporary defence is not in use, no sign of flood protection is left behind, eliminating the possibility of damage to a property through assembly. This also makes it an effective method for heritage or listed buildings.

The Floodtite barrier features a U-shaped back frame design fitted around a door or window opening, with the ability to be painted to match the surrounding wall colouring. A lightweight structure, the flood barrier is easily applied to a back-frame and screwed into place using 6 handles. Providing the same protection as a permanent flood defence, but with the distinct advantage of being fully removable when not in use, this demountable floodgate...

The EGRP manages surface and underground water in an innovative and sustainable way, allowing planners to manage rainfall at source. Installed underground, the system is activated by hydrostatic pressure; as the ground contracts and expands in response to water volumes, the pressure powers the pump, rebalancing groundwater effectively and efficiently. It is suitable for all soil types.

products and equipment from aquaidea ltd | environmental xprt

products and equipment from aquaidea ltd | environmental xprt

Model no: PN90. LED colour: White/Green/Blue/RGB. LED type: 12 pcs high power BRIDGELUX LED. Material: Resin/ABS Plastic. Protection class: IPX8/Rohs/CE/IEC60598. Dimension: 300L x 300W x 60H(mm). Power: 18W for single colour 12-24V AC/DC. 15W for RGB 12-24V AC/DC. Cord Length: 10M Cable kits with heat-shink tube kits. Light angle: 60-90 degree. Illumination: 1300lm. Mounting parts: Plastic niche 230x140H(mm). RGB (2 pin cable): Preset 11 colour...

Model no: PN120. LED colour: White/Green/Blue/RGB. LED type: 108pcs 5050SMD Epistar TW LED. Material: Resin/ABS Plastic. Protection class: IPX8/Rohs/CE/IEC60598. Dimension: 300L x 300W x 60H(mm). Power: 20W for single colour 12-24V AC/DC. 15W for RGB 12-24V AC/DC. Cord Length: 2M Cable kits with heat-shink tube kits. Light angle: 100-120 degree. Illumination: 1500lm. Mounting parts: Plastic niche 230x140H(mm). RGB (2 pin cable): Preset 11 colour...

Model no: SPA50-B. LED colour: White/Green/Blue/RGB. LED type: 3pcs high power BRIDGELUX LED. Material: Resin/ABS Plastic. Protection class: IPX8/Rohs/CE/IEC60598. Dimension: 110 x 90H(mm). Power: 3W 12V AC/DC.

Model no: PT90. LED colour: White/Green/Blue/RGB. LED type: 12 pcs high power BRIDGELUX LED. Material: Resin/ABS Plastic. Protection class: IPX8/Rohs/CE/IEC60598. Dimension: 175 x 30H(mm). Power: 18W for single colour 12V AC/DC.

products and equipment from fermionx ltd | environmental xprt

products and equipment from fermionx ltd | environmental xprt

Meeting the food safety and quality demands of todays microbiologists. Whatever method you use to enumerate and identify bacteria, yeasts and moulds in your laboratory, thorough reproducible homogenisation of the sample is the first and mostcritical step. Numerous studies have demonstrated the Circulator enhancement as a positive benefit to pathogen testing procedures in traditional microbiology and PCR based techniques. As the sample is...

The Stomacher 80 Biomaster and Stomacher 80 microBiomaster laboratory paddle blenders provide small tissue processing solutions for clinical and life science microbiology. Capable of processing samples from 250l to 80ml, the Stomacher 80 range caters for the enhanced sensitivity of downstream processing techniques that demand smaller samples without reducing sample quality.

The Stomacher 3500 Series provides a versatile range of tools for large volume blending and extraction where all washing solution or solvent needs to be retained for analysis. This heavy duty range of machines are built to industrial standards and often used in applications for large volume food microbiology, forensic residue analysis and testing of waterborne parasites.

A versatile Stomacher designed for the BAM testing procedure as well as large volume blending and extraction. Expanding the food testing focused blenders, the Stomacher 4500 BAM is the perfect tool for larger volume BAM testing procedures for extraction from 375g composite samples. This heavy duty Stomacher complements the Stomacher 400 Circulator, the golden standard in sample preparation for food microbiology and suitable for sample volumes of...

The Stomacher 400 Bag Range caters for both the Circulator bag (round-bottom) designed blender bags, and the Classic (square-bottomed) for the older square paddle designed Stomachers. Our blender bags are made from high quality food grade virgin LDPE granule, extruded to 65m film thickness. All Stomacher Bags are irradiated sterile. A certificate or irridiation is available upon request.

Seward Simplettes provide an accurate and economical alternative to pipette tips. At 170mm in length they are designed specifically to pipette samples from the bottom of the Stomacher bag without risk of cross contamination.

Fully waterproof casing (to IP65) for ease of cleaning. Made from hard wearing ABS structural foam for maximum strength. Easy to store hose and telescopic mast designed to be replaceable. Highly visual display, custom designed, easy to use LED control panel. Fully adjustable flow rate from 5 -17 litres/min with 0.8 micron filter. Accessible battery compartment allowing fast battery replacement. Easy carry comfortable case (i.e 2 back to back in...

The Variflow 8 provides a more cost effective solution for those customers who only need to run at 8litres/min. Fully waterproof casing (to IP65) for ease of cleaning. Made from hard wearing ABS structural foam for maximum strength. Easy to store hose and telescopic mast designed to be replaceable. Highly visual display, custom designed, easy to use LED control panel. Fully adjustable flow rate from 5 -10 litres/min with 0.8 micron filter. Accessible...

The low flow workhorse of our pump range. Used for sampling with flow rates from 1-3 litres/min with an industry standard 0.8 micron filter. The robust Airbox Personal MKII is made from a solid aluminium construction with tamper proof screws to ensure that the pump is sealed. Casing of epoxy powder coated aluminium. It has an adjustable flow rate using a trimmer to set the potentiometer to the required sampling rate and a display...

A one piece construction of the base piece with the outlet and hose connection. This prevents water leaking around the threads of a luer type fitting and onto the filter from condensation in humid sampling areas or if a mister is used in the sampling space. This can and does happen with some competitors sampling heads. The shape of the plastic piece that some use allows water to pool up around the air hose connector.

products and equipment from corgin ltd | environmental xprt

products and equipment from corgin ltd | environmental xprt

Corgins modern range of mobile odour and dust suppression units ensure that no area on your site is untreatable. Mobile units are ideal for emergency odour or dust suppression compliance issues. They can be deployed rapidly, and once on site, have a set up time of as little as 2 minutes. The hire option means that capital outlay can be avoided for temporary requirements. As all of our trailer-mounted mobile units are completely...

AtomisterAiroutilises a compressed air supply to produce an ultra-fine mist spray which combats both odour and dust. These systems are perfect for both highly targeted treatment and treatment of general airspace, whether indoors or outdoors.

MistCannonsare the ultimate tool for large-scale dust suppression. By means of a powerful turbo-fan, they project a plume of finely-atomised water droplets into the air to suppress dust effectively over wide areas, before it disperses into the environment.

FlexAir T-Series Tube Diffusers are generally chosen in applications with high airflow requirements, and/or in harsh wastewater environments. They are available in liftable orfixed grid configurations and they are manufactured from high quality materials to suit allprocess operating conditions and wastewater types.

Corgins Vertex Surface Aerator is, to our knowledge, the most efficient world-proven mechanical aerator. The modern impeller design is over 50% more efficient than some older designs.The distinctive seven-bladed impeller with its controlled splash pattern is unique. In addition, it has 7 main features which set it apart from the rest:

The brush rotor was the brainchild of the same man who designed the oxidation ditch: Dr I A Pasveer. Modern Rotex Brush Aerators are more efficient descendants of the original Pasveer brush rotor design. Their traditional use is for oxidation ditches but they can also be used in other configurations.

The HyperClassic Mixer was developed in 1985 in the Fluid Mechanics Department at the Friedrich-Alexander University, Erlangen-Nuremburg, to support a thesis on the most energy-efficient mixing system design. Rather than just upgrading traditional mixer designs, the team started from scratch drawing on a wealth of new technology and advances in Computational Fluid Dynamics (CFD Modelling). With no bias towards old designs holding them...

The Turbo Blower is every aeration experts dream. With a footprint of some 50% of its rivals, this freestanding blower is up to 40% more efficient than traditional positive displacement blowers, and up to 10% more efficient than other high speed turbo blowers. With such incredible efficiences, the Turbo Blower is a true

Phone Corgin by 2pm, and we can have a renowned Spiral Aerator installed and operating by as early as 8am, next day. Sounds too good to be true? Its not. Its Rapid. Spiral Aerators can be installed rapidly and painlessly in almost any wastewater treatment system. They are exceptionally reliable and provide efficient aeration with strong directional mixing. These features make them particularly useful in emergency situations where...

Landox flow boostersare designed to provide horizontal flow propulsion in carousel and oxidation ditch lanes. They consist of a vertical-shaft with 16 radially-mounted fins suspended from a platform-mounted drive.

Water and wastewater treatment plants are usually created as a made-to-measure design and lay-out for a particular project. Depending on the original situation and the intended treatment, various process engineering steps are combined so that the aim of the process engineering is safely within reach. While doing so, the engineer draws from a range of known unit processes. The most important processes from this range are stirring and mixing processes. They play a decisive role in nearly all w

The INVENT CYBERFLOW - Accelerator has been specially developed and optimised for the energy-efficient the generation of a horizontal flow in the recirculation basin for biological wastewater treatment. The overall fluid mechanics concept used here is revolutionary in comparison to conventional flow generators. This results in improvements in the level of efficiency of up to 30%, irrespective of the application. This is made possible by a holistic,...

The INVENT CYBERPITCH - Mixer is particularly used for mixing applications where a high local energy intake is required. In the field of drinking water preparation it is used to thoroughly mix in flocculants and precipitant ideally followed by the well-known INVENT Hyperboloid mixers in the consecutive steps. Also in the wastewater treatment, the CYBERPITCH - Mixer can be used, for instance for the suspension of activated carbon in a contact basin for...

Mixing - Circulation - Homogenization in Waste Sludge Digesters. One of the key-parameters for the overall energy efficiency of a biological wastewater treatment plant is the ability to produce a high amount of methane gas in the waste sludge digesters. The more gas can be delivered to the biogas fire motors (engines), the more energy can be produced to run the various machinery concepts on the plant.

The INVENT HYPERCLASSIC - Mixer is a vertical mixer with a hyperboloid-shaped mixer body, installed close to the bottom, and a drive mounted in dry position above the water level. Contrary to other products, it was developed and designed especially for applications in the area of water and wastewater treatment.

INVENT made a significant contribution to the efficiency and cost-effectiveness of such plants by introducing the hyperboloid mixing technology to the market for water and wastewater treatment over 20 years ago. Since then, the hyperboloid mixing technology has been continuously developed and improved. Thousands of successful installations in municipal and industrial water and wastewater treatment plants world-wide impressively demonstrate that the...

The INVENT HYPERDIVE- Mixer is a vertical mixer with a hyperboloid-shaped mixer body, installed close to the bottom, and a submersible drive. Contrary to other products, it was developed and designed especially for applications in the area of water and wastewater treatment. How can we support you with the planning, optimization, modernization of your plant, or just generally with the realization of your ideas?.

The Invent Hyperclassic Flocculation System is based on the patented hyperboloid mixer, which has been specifically designed to minimize floc shear while providing excellent mixing and eliminating settling within flocculation basins. The Flocculation System provides smooth mixing flow through the entire tank, maximizing floc-building interactions between particles. Combined with the INVENT CYBERPITCH flash mixer INVENT can provide a complete flash mix...

The INVENT HYPERPITCH- Mixer add-on takes care about the reliable reduction of scum and floating sludge in anaerobic and anoxic basins. The HYPERPITCH- Mixer add-on can easily be installed on the shaft of an existing INVENT HYPERCLASSIC- Mixer.

Efficient mixing in drinking water reservoirs. Drinking water reservoirs play a central role in the implementation of safe access to drinking water in our cities and communities. The treatment and filtration processes to produce drinking water can be costly, and to ensure the final product to the consumers is of the highest standard, quality must be maintained within the storage facilities. Within the storage facilities the water can deteriorate...

In the purification of water and wastewater more and more process-technology steps for cleaning and purification are coming into use, which combine to form a complete installation. Processing can be divided into physical, physical/chemical and biological treatment. The biological phase represents the heart of the process. In this phase, carbon and nitrogen compounds are biologically broken down. The basis of this process is effective mixing and the efficient addition of oxygen, so that the b

The HYPERCLASSIC- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage.

Efficient and reliable mixing and aeration for lagoon wwtps. For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or operator had only two options until today: He could either use surface aerators or floating membrane aerators. While the surface aerators usually do not provide economical oxygen transfer performance and insufficient mixing, the floating membrane aerators have to overaerate to provide sufficient...

The HYPERDIVE - Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage.

INVENT E-FLEX is the ideal aerator for municipal and industrial treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge process.

E-FLEX - FLOAT is the floating version of our proven E-FLEX- Aaeration System. It is mainly used for aerated wastewater ponds or lagoon tanks with plastic liner, earthen basins with natural sealing, natural ponds and lakes and all aerated tanks, in which the levelling of conventional bottom aerators is only possible with considerable effort due to the unevenness of the bottom.

The INVENT iDISC has been developed and optimized for the use in municipal and industrial wastewater treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge process.

The INVENT Coarse Bubble Aeration system (iCBA) has been developed and optimised for special applications in industrial and municipal wastewater treatment plants. It provides oxygen supply and optimal mixing during the biological phase, in particular for use in processes that use carrier media for biomass detention, whether moving-bed or fixed-bed processing.

The TEX-FLEX -Aeration System has been specially developed and optimized for demanding applications in industrial and municipal wastewater treatment plants. For industrial applications in particular, the use of conventional membrane diffusrers is restricted or even impossible, or else they must be frequently replaced in order to guarantee trouble-free operation of the plant. In this situation, the TEX-FLEX- System provides a reliable alternative. Its...

The INVENT ALPHAMETER combines control and monitoring liquid phase and gas phase to produce real time measurement of key parameters for process and aeration control including: Aeration System Oxygen Transfer Efficiency (OTE). Process Oxygen Uptake Rate (OUR). Mixed Liquor Value.

The INVENT iTURBO-Blower is specially suited for supplying air to aeration systems in activated sludge plants. The iTURBO complements INVENTs line of high efficiency aeration systems and aeration control products, maximizing system performance while minimizing energy costs. The iTURBO is designed for peak efficiency and the perfect harmony of stability and reliability.

INVENTis focussed on municipal and industrial water and wastewater treatment. We have used our many years of experience in this sector and our expertise in the fields of fluid mechanics, hydraulics and component design to develop innovative products for Solid-Liquid Separation, likeiDEC-SBRDecanting Systemand

Before the INVENT-decanters were created, different types of effluent discharge constructions were used in the market with mixed results. This was the reason for INVENT to develop a new SBR-Decanting System for the discharge of clarified wastewater from SBRs.

Compact stainless-steel filter with advanced hydraulic performance. This Diamond Filter was constructed especially for the separation of solids from fluids as a tertiary filtration step and was fluid-mechanically optimized with the help of CFD1. It is extraordinarily energy efficient and offers excellent separation performance using a minimum of space. Its advanced hydraulic performance is based on the principle of cross-flow-filtration.

A complete system solution from INVENT comprises, depending on the customers requirements, the basic and detailed engineering, project management, delivery of the mechanical components, installation of the plant, and training of plant personnel. The mechanical components, such as mixers, aeration systems, pumps, blowers, armatures and instrumentation, control and automation systems, are carefully selected for an INVENT system solution, and co-ordinated with each other. INVENT takes re

As a result of the exceptional suitability of the HYPERCLASSIC - Mixing and aeration system for Sequencing Batch Reactor plants, we have more than 15 years of experience and considerable knowhow in this fjeld. For this reason, we offer SBR plants as an INVENT system solution. In this case, we also supply a special clean-water decanting system and a cycle strategy that is tailored to the individual application.

There is a further INVENT standard solution for so-called pool purification plants. For that kind of wastewater treatment plant, we supply floating aeration systems, floating mixers, and a specially developed clarifier cleaning system. In this field too, INVENT has extensive know-how and many years of experience.

Advanced fluid simulation for the water & process industry. High resolution, realistic, real time fluid simulation opens a whole new world of possibilities. THINK Fluid Dynamix is a consulting and engineering service department that specializes in advanced numerical technologies, such as computational fluid dynamics and automated optimization. Our goal is to help our clients to find better solutions, better designs, faster.

In the field of wastewater technology Landustrie has a lot of specific knowhow and ample broad experience. With our wide range of equipment for both wastewater and industrial applications we are able to provide efficient solutions. These solutions not only cover conventional wastewater treatment technology, but also new purification systems like decentralized sanitation and reuse.

In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration system.

Screen cleaners are employed in many places to remove floating and/or suspended debris. The principle of the Mnster screen cleaner is based on a construction running along an elevated track, and consisting of a carriage and a loose grab, available in several configurations. The advantage of a loose grab is that screens of any width and depth can be cleaned. The variable track length allows positioning of a deposit at any desirable place.

The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep tanks, oxidation ditches, MBR- and SBR systems,...

For simple and efficient aeration in municipal and industrial wastewater treatment plants Landustrie supplies two standard aeration rotors: Landy 700 and Landy 1000 resp. with aeration capacities of 54 kgO 2/h and 85 kgO2/h with maximum rotor lengths of 9 m. At special request of our clients these rotors can be supplied with other dimensions as well. Aeration capacities can be effected by variation of rotational speed or immersion depth.

For both industrial and municipal wastewater treatment Landustrie also supplies aeration systems with fine bubble diffusers. Fine bubble diffusers can be easily combined with the LANDOX flow booster for creating an optimal flow. With our process know-how and experience we are able to select the most efficient aeration configuration for our clients.

In the field of surface aeration Landustrie has a long history and broad experience. Landustrie designs, manufactures, supplies, installs and maintains many types of aeration systems, with either surface aerators, aeration rotors, diffusers and Landox flow boosters. Since the introduction of our own full-scale aeration test tank and the availibility of substantial process know-how, Landustrie is a leading player in aeration technology. aIn our...

The Netherlands are renowned for their water management and water control. And in all modesty, we do know what we're talking about as the first drawing of the initial pumping station dates back from 1916. In earlier days our screw pump was mainly used in polder pump stations, but nowadays LANDY screw pumps are used in many applications, such as irrigation, drainage and storm pumping stations.

The LANDY designed and manufactured back-raking screen is a device constructed from galvanized steel or stainless steel, comprising an adjustable transport chain driving a bar with an attached rake. This type of screen is predominantly used on smaller pumping stations with intakes up to channel widths of 4 meters and water depth up to 4 meters. As a result it is particularly suitable for single water intakes.

Important basic principles of our Landy pump series are quality, keeping it simple, long term lifespan and less maintenance hereby reducing lifespan costs, and environmental consideration. Landustrie can supply pumps in a broad variety of materials and with the necessary certificates. It is our goal to fulfill your pump challenges in a satisfaying way and to offer a first-rate pump solution.

Our LANDY closed screw impeller pumps are ideally suited for situations where power consumption is an important issue. This type of impeller is the new generation single channel impeller performing with high efficiency and good non-clogging performance.

Our LANDY heavy duty cutter pumps are specifically designed for sewage and wastewater applications where solids have to be cut into small particles. The high torque cutting system cuts, where others grind, and most fragments pass the cutting system without wearing the actual cutting edges.

LANDY mixers are designed to keep sumps that are highly contaminated with solids and fibres in suspension. The mixers are renowed for their outstanding mixing capacity thus ideally suited for industrial mixing and suspension applications. Mixers can be supplied in cast iron or duplex (DWMseries) and Nihard 4 (DNMseries) material. Explosion proof versions availabe as well (ATEX).

Our LANDY submersible DCP pump with open channel impeller is ideally suited for slightly contaminated wastewater. This high efficient pump is featured by a compact design, high pressure and non-clogging performance.

Landustrie designs, builds and installs highly efficient, cost-effective and environmentally beneficial hydropower turbine system solutions that are specifically designed for relatively low head, high flow river courses. We provide all roles from initial site investigation and engineering/designing to manufacturing and installation. We have at our own manufacturing facility all of the latest technology to build the most durable and best performing hydropower screws. In some situations where

The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Filters. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Heating. Wheel set

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Wheel set

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Filters. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Heating. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Filters. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Heating. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Filters. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Heating. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Filters. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Heating. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Barrel with noise reduction. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Wheel set.

Turning, Electric automatic. Turning area: All around, no mechanical limit. Turning area setting: From 15 or 30 or 60. Pressure gauges. Manual main valve. Manual or Automatic water drain. Pump run dry protection. Wheel set.

Filters. Pressure gauges. Manual or Electric main valve. Manual or Automatic water drain. Pump run dry protection. Heating (winter kit). Wireless remote control (100m). LIMITLESS HORIZONTAL ROTATION. The new WATER ELECTRIC SWIVEL from Duztech offers limitless horizontal rotation.

Duztech Heavy Duty mist cannons are built to last! Equipped with a strong chassis the machines are perfect for the Demolition, Steel and Rental industry. All chassis components are hot dip galvanized. Features as electric tilt and automatic main valve as standard. Also standard is automatic swing operation to distribute the water mist over large areas. The units also feature low power consumption, compared to the throwing distance. The flow is...

Fan motor rating 75 kW. Pump motor rating 3 kW. Current consumption 123 Amps. Throw 150 - 200 m. Dry weight 2 100 kG. Specified voltage 400 AC (380-415). Line connection L1-L2-L3-N-PE. Frequency 50 Hz. Control panel Start / Stop - Tilt up/down. Turn left/right - Auto turn on/off. Turn area setting. Remote control Hand held wireless remote control with. min range of 100 m at free line of sight. Elevation, HYDRAULIC -20 / +45. Automatic turning...

Duztech HS System are a fixed system for reduction of dust particles. The flow rate is low and thereby the moisture content is kept low. Low floe rate is also of great importance if the availability of water is limited. The water droplets are adapted for PM 2,5 - PM 10 particles.

Duztech M5 mist cannon is a small mobile machine that can be moved by hand. Compact and a weight of only 2,9 kg makes it extremely mobile at indoor demolition sites. The intensity of the water mist are adjusted by a rotary switch. The built in water tank can be used for quick actions. If used in continues operation a water hose can be connected to the fixed water inlet. The unit feature low power consumption. Its connected to a standard 1 phase...

Duztech Mosquito mist cannon is a small machine that can be moved by hand. Compact and light in weight makes is perfect for indoor demolition. Standard is automatic swing operation to distribute the water mist over larger areas with a throwing distance of 10-15 m. The unit feature low power consumption. Its connected to a standard 1 phase 230V wall socket. The water mist generated by this unit is extremely fine and there-fore effective against...

products and equipment from s.b environmental co, ltd

products and equipment from s.b environmental co, ltd

As we are incinerator manufacturer we present Ecogreen-20 model incinerator is latest design for waste treatment; include medical waste incinerator, animal and pet cremation, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote areas waste, and other waste disposal and treatment, etc.

As we are incinerator manufacturer we present Ecogreen-30 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote areas waste, and other waste disposal and treatment, etc.

As incinerator supplierwe introduce Ecogreen-50 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote areas waste, and other waste disposal and treatment, etc.

As Medical incinerator, industrial, Animal & general IncineratorManufacturer & supplierwe introduce Ecogreen-100 model incinerator is latest design for waste treatment; include medical waste, animal...

As Medical, industrial, generaland Animal IncineratorManufacturer & supplierwe introduce Ecogreen-150 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation wastes, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote...

As Waste management incinerator, hospital, industrial, Animal & general IncineratorManufacturer & supplierwe introduce Ecogreen-300 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote areas waste, and...

As aWaste Incinerators for General & Municipal Use, medical ,use , hospital use and animal use, solid incinerator use, industrial use, and general and mobile IncineratorManufacturer & supplierwe introduce Ecogreen-500 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation, industrial and solid waste, Hotels waste,...

In addition to having two main combustion chambers (primary combustion chamber) and (secondary combustion chamber), our green incinerators have also (Mix combustion chamber) which is bigger to make sure long residency time in secondary combustion chamber, ensure full combustion, kill the virus and remove black smoke.

Our incinerators use easy to use and start-up and excellent performance ratio burners.The latest technology and high quality from ItalyCE certified burners used in our incinerators which cause high effective and high burn rate.

Our green incinerators use quality standard PLC control panel which is easy for installation and operation top quality parts from Europe such as switch and contractor. In addition an optional control panel with touch screen & monitoring features to view and show different parameters for burners, blowers, .etc

products and equipment from econix ltd | medical xprt

products and equipment from econix ltd | medical xprt

Bio-bin 1Ltr is perfectly suitable to be used in the field (eg community nursing) or for private first aid providers. It is the perfect size to be used for vomit or other small amounts of offensive waste. Also useful in labs where limited space is available such as inside fume cupboards.

Bio-bin 1Ltr is perfectly suitable to be used in the field (eg community nursing) or for private first aid providers. It is the perfect size to be used for vomit or other small amounts of offensive waste. Also useful in labs where limited space is available such as inside fume cupboards.

Bio-bin 1Ltr is perfectly suitable to be used in the field (eg community nursing) or for private first aid providers. It is the perfect size to be used for vomit or other small amounts of offensive waste. Also useful in labs where limited space is available such as inside fume cupboards.

Bio-bin 2Ltr has been designed to replace plastic waste containers for your non-sharp lab/hospital waste. Ideal for disposal of pipette tips in the lab or for general ward and community waste.The bins stack inside each other which saves a considerable amount of space.

Bio-bin 2Ltr has been designed to replace plastic waste containers for your non-sharp lab/hospital waste. Ideal for disposal of pipette tips in the lab or for general ward and community waste.The bins stack inside each other which saves a considerable amount of space.

Bio-bin 5Ltr is ideal for bench top use in labs as well as in wards and theatres. The bin comes folded flat which makes a significant space saving in storage and also makes the bin perfect for use in community nursing.

Bio-bin 5Ltr is ideal for bench top use in labs as well as in wards and theatres. The bin comes folded flat which makes a significant space saving in storage and also makes the bin perfect for use in community nursing.

ep equipment - products that simply work

ep equipment - products that simply work

EP Equipment, founded in 1993, is a Hangzhou-based leading manufacturer specialising in lithium-powered warehouse equipment.From product design andproduction to after-sales services EP supports material handling equipment suppliers worldwide.

We offer a wide range of products to fulfil the individual need of every customer covering occasional operations to multi-shift applications in warehouses or distribution centers at high frequency levels. At EP Equipment, we commit to producing the right truck for each application.

EP Equipment maps out a full range of operator performance solutions for dealers to serve in a wide range of industries from products, to technical support, to technology development. We are the best industrial equipment manufacturer around operator needs.

EP Care system covers you from technical support, in-house manufactured spare parts supply, warranty service and after-sales training with our smart designed products, efficient online platform and professional technicians.

We offer a wide range of products to fulfil the individual need of every customer from occasional operations to multi-shift applications in warehouse or distribution centers at high frequency level. At EP Equipment, we commit to producing the right truck for each application.

Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously. CookieDurationDescriptioncookielawinfo-checbox-analytics11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".cookielawinfo-checbox-functional11 monthsThe cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".cookielawinfo-checbox-others11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.cookielawinfo-checkbox-necessary11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".cookielawinfo-checkbox-performance11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".viewed_cookie_policy11 monthsThe cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Related Equipments