roll gate hardware

rolling gate hardware | hoover fence co

rolling gate hardware | hoover fence co

Complete rolling gate kits feature most typical hardware necessary to outfit a residential or commercial chain link style rolling gate: gate track brackets, rear wheels, rear wheel mounting brackets, and a latch.

Individual rolling gate parts are available to build from scratch, customize, and repair existing chain link style rolling gates. Customize with high quality polymer rear gate wheels, additional gate track brackets for a top and bottom track, and choose the leading edge wheel to compliment your gate. Gate parts include 6" wheel carrier (narrow), 8" wheel carrier (wide), pneumatic wheel carrier, v-track gate wheels, single wheel carrier, gate bottom guides, and aluminum v-track.

stealth cantilever roller | dac industries, inc

stealth cantilever roller | dac industries, inc

The evolution of the modern cantilever roller has taken place. Rugged high-tech polymer rollers that glide with ease have replaced those make of antiquated metal castings. Durable and strong, the STEALTH cantilever rollers allow your gate to slide smoothly and effortlessly. STEALTH rollers have a galvanized solid steel chassis and maintenance-free permanently sealed and lubricated bearings replacing ancient zerk fittings and messy grease guns. Proudly made in the USA, the STEALTH rollers will keep your gate soaring smoothly in the future.

Our team is working hard to provide you with the gate hardware you need during the COVID-19 outbreak. Unfortunately, a few of our suppliers have shut down their operations, leaving us with limited stock on some items. If you have any questions, please reach out to us through our contact page. We are doing our best to fulfill orders and keep our team safe during this time.

slide gate hardware, guide rollers, gate catchers, v-groove wheels, chain, wheel boxes, cantilever gate hardware, overhead barn door style hardware

slide gate hardware, guide rollers, gate catchers, v-groove wheels, chain, wheel boxes, cantilever gate hardware, overhead barn door style hardware

Gate Depot has a Wide Variety of Slide Gate Hardwareincluding chain, chain tensioner bolts, idler assemblies, guide rollers, gate catchers, mooring points, v-track, v-track stops, v-groove wheels, wheel boxes, mounting plates, pipe track wheels, nylon cantilever rollers, cantilever track, and carriage assemblies. We carry products from Duragate, DoorKing, Eagle, Liftmaster, Ramset, Locinox, Lockey, and Communelo. If you are looking for gate locks, you will want to go back one page and click on the gate locks category. All of our sliding gate hardware is designed specifically for vehicular traffic, for pedestrian or garden gates the only option we have is barn door and overhead gate hardware which can also be found back one page in the Overhead/Barn Door Hardware category.

The Most Common Wayto setup a slide gate is with a v-track and v-groove wheels, you can take a look at our Slide Gate Diagram. At the base of the support posts you will pour a concrete foundation twice as wide as the gate. Onto this concrete foundation you will mount a v-track for the gate to roll on. The gate itself will have wheelboxes welded or bolted to the bottom of it so that you can mount v-groove wheels on the bottom. Two wheels is sufficient for gates up to about 20' long. The support post nearest the operator will have a set of guide rollers attached to it that keeps the gate upright while allowing it to glide freely back and forth. The support post on the far side of the driveway will have a gate catch or mooring point installed that keeps the gate secure when it is fully closed. The rear of the gate will have extension arms welded or bolted to the top and bottom of the gate to allow the top to stay within the guide rollers and the bottom to have chain routed to the rear of the gate operator. The chain will be attached to the gate with a set of chain brackets and tensioner bolts. At the rear of the track you will install a slide gate stop to prevent the gate from running off of the track if a limit switch fails.

Cantilever Hardware is Typically Used For Chainlink Gatesor in snowy areas where a gate running on a track may be obstructed. A chainlink gate will have a rolling gate wheel placed at the front to provide support when in the closed position, with a set of 4 pipe track wheels at the back end of the gate to keep the gate in line and provide support when in the open position. If you are building a heavier custom steel gate you will want to look at the Communelo Cantilever Gate Hardware distributed through Architectural Iron Design under the brand name Duragates. This system uses a "C" shaped cantilever track welded to the bottom of your gate with a set of 2 carriages that support the full weight of the gate when it is full extended in either direction. At the top of the gate you have a set of guide rollers holding the gate vertical in a similar fashion as a v-track style gate. They also sell a variety of catchers and support cups for either end of the gate. Because of the wide variety of weight and length possibilities on a custom gate it is important to properly engineer the foundation and the gate itself to support the final weight. Make sure to speak to an engineer.

From: $18.00

To: $28.00

@ Copyright 2018 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot

pipe track & cantilever gate hardware

pipe track & cantilever gate hardware

Cantilever Hardware is Typically Used For Chainlink Gatesor in snowy areas where a gate running on a track may be obstructed. A chainlink gate will have a rolling gate wheel placed at the front to provide support when in the closed position, with a set of 4 pipe track wheels at the back end of the gate to keep the gate in line and provide support when in the open position. If you are building a heavier custom steel gate you will want to look at the Communelo Cantilever Gate Hardware distributed through Architectural Iron Design under the brand name Duragates. This system uses a "C" shaped cantilever track welded to the bottom of your gate with a set of 2 carriages that support the full weight of the gate when it is full extended in either direction. At the top of the gate you have a set of guide rollers holding the gate vertical in a similar fashion as a v-track style gate. They also sell a variety of catchers and support cups for either end of the gate. Because of the wide variety of weight and length possibilities on a custom gate it is important to properly engineer the foundation and the gate itself to support the final weight. Make sure to speak to an engineer.

From: $229.00

To: $229.00

From: $1,224.00

To: $2,130.00

From: $589.00

To: $1,927.00

From: $234.00

To: $1,193.00

From: $210.00

To: $837.00

From: $376.00

To: $1,250.00

From: $234.00

To: $1,028.00

From: $310.00

To: $1,140.00

From: $560.00

To: $2,278.00

From: $630.00

To: $1,726.00

From: $735.00

To: $1,929.00

From: $1,386.00

To: $3,267.00

@ Copyright 2018 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot

Related Equipments