sand making plant supplier process crusher

sand making plant, sand making production line,sand production line - dsmac

sand making plant, sand making production line,sand production line - dsmac

DSMAC sand production line mainly consists of vibrating feeder, jaw crusher, sand making machine, vibrating screen, sand washing machine, belt conveyor, electric control panel, etc, and capacity is 50-500T/H.

Due to the disadvantage of natural sand resource nowadays, our company researches 5X&VSI crusher for producing artificial sand to replace natural sand.it features of high capacity of cubical sand, adjustable fineness, low cost, effectively improving. It is suitable for crushing high quality of basalt, diabase, granite, river gravel, limestone and other hard or medium hard rocks.

The sand production line consists by vibrating feeder, jaw crusher, sand making machine, vibrating screen and belt conveyor and other mining equipment. According to different process requirements, various types of mining equipment can be combined to meet the technological requirements of different customers.

Firstly, the stone was broken by primary crushing machine such as jaw crusher, impact crusher, then, the coarse sand grain was transported by belt conveyor to secondly crusher such as cone crusher for further crush. Then the broken small stone can be screened out the two major sands via vibrating screen, one kind can be transported to sand making machine, the other will be crushed again.

Core equipment for manufactured sand production line is sand making machine such as vsi crusher, vsi5x crusher etc. There are three generations of sand making machine produced by DSMAC company and each generation has a superior performance and better economic benefits than its previous one.

Now most of the manufactured sand are medium, coarse sand, the fineness modulus is of 2.6-3.6 in turbid, particle size distribution even and adjustable, with a certain amount of powder, rough surface, sharp edges.

High strength pumping concrete made by manufactured sand will not block the pump in the process of pumping. The concrete of right use of manufactured sand has large density, impermeability, good freezing-resisting property, other physical properties and long-term durability can use to meet the design requirement too.

DSMAC has always pursued the service concept of "Create customer value, the customer is always right". As for service, clients' needs have always been our primary concern. Through standardized, differentiated and super valued service, we can reduce clients' psychological cost and use-cost, and ultimately increase clients' transition value, profitability and purchasing power. As a result, we can improve DSMAC's service brand competitiveness and lead the way of service for fellow competitors.

Service Network Presently, DSMAC has offices and branch companies in more than 10 countries and regions, and 31 offices in China. In addition to traditional after-sale service, our company offers internet sales and product trace services. We guarantee that we will offer our valued clients timely and thorough services.

Service Team Our company has 30 engineers providing professional after-sale services. They are all skilled, experienced and familiar with the working principles of various machines and equipment. We promise that we will arrive on scene within 48 hours for 1000 kilometers when we get a call from our clients and not over 72 hours for clients farther away.

river stone crusher supplier,river stone sand making plant machine for sale

river stone crusher supplier,river stone sand making plant machine for sale

After river stone processing, it will be the river stone sands. These processed river stones are the important mineral raw materials. They are widely used in water conservancy and hydropower, highway, highway, high-speed railway and passenger dedicated line, bridge, airport runway, municipal engineering, and high-rise building the mechanism of sand and stone plastic production. Pebble has been widely used as concrete aggregate. It has high application value and low acquisition costs.

The river stone will be processed with jaw crusher and it will reach the coarse processing purpose. Through the belt conveyor, the processed coarse materials will be taken to the fine crusher machine for the secondary processing task. With the help of vibrating screen, the fine crushed materials will be separated into two kinds. The one who satisfy the sand making machine production needs will be taken into vertical impact crusher for the sand making. The other part will be back into fine crushing machine again to be crushed again.

In Zenith, the river sand stone making plant equipment for sale refers to the VSI crusher. B series VSI crusher from Zenith is widely used and is popular among the clients. Its capacity can reach 520 tph. Besides, our VSI crusher machine capacity has a great range for various clients' production needs. The personalized design makes our river stone sand making machine is convenient to repair and change the spare parts.

aggregate crushing plant and processing | sand maker manufacturer

aggregate crushing plant and processing | sand maker manufacturer

Sand and gravel aggregate production mainly include dry and semi-dry processes. Dry production means that the process of the entire production line is basically free of water. This dry type aggregate production process is mainly adopted in northern China. Semi-dry production means that there is no water in the section before crushing and before crushing, have high cleanliness. Semi-dry production processes are used more in southern China. In this process, sewage containing soil and stone powder is treated by a thickener and a filter press, the water circulation utilization rate would be improved greatly. The description of effect aggregate crushing plant and processing equipment as following:

1) Capacity: 1 000 t/h gravel aggregate. 2) Product variety: 0.075~4.75 mm, 4.75~15 mm, 15~31.5 mm gravel aggregate. 3) Characteristics of raw materials: The limestone and clay content are large. 4) The quality of gravel aggregate meets the requirements of GB/T 14685-2011 Construction pebble and gravel. 5) Environmental protection emission standards: Dust emission concentration 20 mg/Nm 3 , wastewater reaches zero emission, and noise emission meets national standards.

The semi-dry sand aggregate production line can be simply summarized as crushing, sifting, sludge-containing wastewater treatment and gravel aggregate storage. In order to obtain aggregate products in line with national standards, the selection of aggregate production equipment plays a decisive role in the design of the production line, which mainly depends on the physical properties of the raw materials (such as the hardness of the raw materials, the abrasiveness index, the soil content, etc.) and the local Market demand. The aggregate production process is determined as a three-stage crushing system consisting of a rotary crusher and a two-stage cone crusher, a three-stage screening system for circular vibrating screens, a silt handling system after screening, and a finished material storage system. The main equipment includes 1 rotary crusher, 2 pre-screening vibrating screens, 2 standard medium-cone crusher, 2 short-head crushing cone crushers, 4 first-stage screening vibrating screens, 8 finished products. Screening vibrating screen, 4 double spiral sand washing machines, 2 sets of cyclone sets, 4 sets of water filter shakers, 1 set of thickeners, 3 sets of filter presses.

The coarse crushing equipment used for the production of aggregates is generally a rotary crusher, jaw crusher and impact crusher. According to the production capacity requirements (rough crushing more than 1 200 t / h), the characteristics of raw materials containing more soil and the market demand for sand and gravel aggregate products, combined with the general map of the plant, the process layout, the coarse crushing equipment uses the rotary crusher. go to jaw rock crusher, impact crusher price.

Fine crushing equipment in aggregates is generally available with cone crushers and impact crushers. The cone crusher is mainly suitable for crushing rock with high hardness and high abrasive index, and the product has less powdery material. The impact crusher is mainly suitable for crushing rock with medium or low hardness and abrasive index. The product has more powdery materials. The medium-crushing adopts the standard cone crusher, and the short-cut cone crusher is a good choice. cone crusher price.

Stone screening equipment generally uses a linear vibrating screen or a circular vibrating screen. The linear vibrating screen has a small processing capacity and is suitable for small particle size screening and small-yield production, and can be used for water filtration of aqueous materials. The circular vibrating screen has high screening efficiency and large processing capacity, and is suitable for large-size screening and large-scale production. When the pressure spraying system is arranged on the circular screening device, it can be used as a stone washing device. With the hydraulic flushing, the stone rolls and vibrates on the screen surface, and it is easier to wash away the fine mud adhering to the surface. For the mud powder and stone powder in the 0~4.75 mm product, you can choose the spiral sand washing machine or the bucket wheel sand washing machine to obtain the machine sand after washing.

The sludge-containing wastewater after washing the aggregate of sand and gravel needs to be treated to achieve zero discharge of wastewater from the production line. After investigation of the wastewater treatment equipment and its use, the production line selected a system consisting of ahydro cyclones, a thickener concentrator and a filter press to treat the wastewater and mud, avoiding the direct discharge of muddy wastewater into the sedimentation tank. The disadvantage is that the floor space is large and the sedimentation tank is difficult to clean.

The raw materials of the mine are coarsely broken by the rotary crusher and then stored in the intermediate material storage shed, and then transported to the limestone pre-screening workshop. After the pre-screening, the material larger than 31.5 mm is fed into the standard cone crusher for medium crushing; 4.75~31.5 mm The material is sent to the aggregate screening workshop together with the crushed material for a first-stage screening. When the soil content of the raw material is small, the material less than 4.75 mm after the pre-screening is also sent to the screening workshop for screening. When the soil content of the raw materials is large, the materials less than 4.75 mm are transported to the soil-containing waste storage shed for storage, and then used for the retaining cushion after the mining. The rotary crusher, the pre-screening vibrating screen, the cone crusher and the material transfer point are all equipped with high-efficiency bag dust collectors for dust removal.

The aggregate screening is composed of a three-stage wet screening. The wet screening of each stage is accomplished by vibrating the high pressure spray equipment installed on each screen surface and the material on the screen. After the materials from the pre-screening and medium-breaking workshops are screened by the first-stage sieve vibrating sieve, the materials larger than 31.5 mm are returned to the medium-sized crushing workshop and then broken. The material less than 4.75 mm is sent to the double-screw sand washing machine of the water washing sand workshop together with the washing stone wastewater for sand washing. 4.75~31.5 mm of aggregate is transported to the second and third grade finished vibrating screen for further screening. The 15~31.5 mm and 4.75~15 mm aggregates after the second and third stage screening are sent to the respective finished product yards. The fine mud powder of less than 4.75 mm under the sieve is also sent to the double-screw sand washing machine of the water washing sand workshop together with the washing stone wastewater for sand washing.

The material less than 4.75 mm is separated with the washing stone wastewater by the double-screw sand washing machine, and the separated sewage enters the cyclone group for separation again, and the separated mechanical sand product is transported to the 0.075-4.75 mm stack. The separated sewage is then concentrated into a concentration tank and concentrated by a thickener, and the dosing process is carried out during the concentration process. The concentrated upper liquid of the liquid flows into the clear water tank and is recycled to the production line by the clean water pump. The lower mud passes through the intermediate buffer pool and is pumped through the slurry to the filter press workshop for pressure filtration. The crushed mud cake scrap is stored separately in the mud cake dump for reclamation after mining.

The washed products are stored in the open air. Motor vibrating feeders and belt scales are set under each product pile and then transported to the dock for shipment. At least two belt scales are placed under each pile to control the reasonable gradation of the aggregate of sand and gravel. JXSC mining machinery manufacturer provides a full set of aggregate processing plant equipment, gravel processing plant design is available. Contact us to know the sand washing machine, sand making machine price.

Hello, we intend to pursue and start a new venture in setting up aggregate crushing unit in Maharashtra India. Shall be glad to have detailed project report with prospective indices for the same. Thanks & Regards Jatinder Singh

Jiangxi Shicheng stone crusher manufacturer is a new and high-tech factory specialized in R&D and manufacturing crushing lines, beneficial equipment,sand-making machinery and grinding plants. Read More

sand making plant for sale - eastman rock crusher

sand making plant for sale - eastman rock crusher

Materials: According to different demands, sand making plants include pebble sand production line, limestone sand production line and the like. All of which could produce aggregates from granite, basalt, pebbles, limestone, river pebbles, calcite, slag, etc.

Applications: It can crush various of rocks into different particle size, with uniform shape and high compressive strength, artificial crushed sand is high quality aggregate for highway, railway, water conservancy, concrete mixing station and other industries.

Materials: According to different demands, sand making plants include pebble sand production line, limestone sand production line and the like. All of which could produce aggregates from granite, basalt, pebbles, limestone, river pebbles, calcite, slag, etc.

Applications: It can crush various of rocks into different particle size, with uniform shape and high compressive strength, artificial crushed sand is high quality aggregate for highway, railway, water conservancy, concrete mixing station and other industries.

Then the vibrating screen will grade the materials, where stones that meet the granularity standard will be sent to VSI crusher (sand-maker), while the rest will be returned for another round of crushing.

Part of the stones processed by VSI crusher (sand maker) will be made into sand and become sand products after being washed. The rest will be further crushed by the sand maker into qualified sand materials of various types.

Sand making production line consists of vibrating feeder, Jaw Crusher, Cone Crusher, Impact Crusher (sand-maker), vibrating screen, sand washer (sand classifier), belt conveyor, water treatment system and centralized electronic control system. We could also add a dust separator to the line to meet the specific requirements of our clients. We could assemble the production line according to the requirements of various processes to ensure the line has the best performance.

Sand making flow: Raw material first enter the primary crusher (usually a jaw crusher) for the primary crushing, and then the primary crushed materials are transferred to the secondary crusher (usually a cone crusher, or impact crusher) through belt conveyor. The vibrating screen is placed after the secondary crusher to screen crushed materials, where undersized materials meet the granularity standard will be sent to VSI sand making machine to further fine crushed, and the rest of over size stones are be returned to the secondary crusher. The last step is sand washing, wash away powder, clay and so on. As the crushing circuit goes on, the raw big materials will be crushed into qualified size manufactured sand that used in industry.

Our Eastman sand making machines are mainly be used to those types of sand making process:1.Manufactured Sand Making2.Artificial sand Making3.Sand gravel making4.Crushed sand making5.Silica sand making6.Quartz sand making

We have the special sand making machine like VSI crusher, sand screening machine like vibrating screen, also we have sand washing machines like wheel sand washer and spiral sand washer. These sand crushing, washing and screening equipment are for maximum productivity. We also supply individual crushers and screens, as well as the key components and wearing parts.

We can help customers design those plants include quartz sand production line, building sand production line and stone material production line, all of which could produce aggregates and crushed sand from limestone, granite, basalt and river stone. Especially we have a lot of experience in sand plants and sand washing plants with river stone. All these products are widely used in the construction of hydraulic power plants, building material, highway, and urban infrastructure.

We offer complete pre-sale, sale and after-sale services. Also we can provide free help to assemble sand plant (sand-making production line) according to our clients requirement for material size, productivity and usage. We design the process in line with the production site of our clients so as to bring our clients the most rationally designed and the most economically efficient sand plant.

Typically our designed sand production line adopts a high level of automation and low operation cost, featuring high crushing efficiency, energy conservation, great productivity, less pollution and easy maintenance. Also, Stone products produced by our eastman well designed production line get excellent shape, meeting the national standard for high-speed feeding materials.

Typically our designed sand production line adopts a high level of automation and low operation cost, featuring high crushing efficiency, energy conservation, great productivity, less pollution and easy maintenance. Also, Stone products produced by our eastman well designed production line get excellent shape, meeting the national standard for high-speed feeding materials.

Related Equipments