small raymond mill raymond grinding mill to malaysia

raymond mill|raymond grinding mill|grinding plant|grinding mills|raymond roller mill-powder making machine-henan fote machinery co., ltd

raymond mill|raymond grinding mill|grinding plant|grinding mills|raymond roller mill-powder making machine-henan fote machinery co., ltd

Raymond mill or raymond grinding mill is commonly used grinding plant, which is mainly used for the grinding and processing of barite, calcite, marble, limestone, dolomite, activity white soil, activated carbon, kaolin, cement, phosphorus ore, gypsum, glass and other non-flammable and explosive materials whose Mo's hardness is not than 9.3 level and humidity is below 6% in chemical and building, industry.

4. Important parts adopt high-quality steel materials and wear-resistant parts all use high-performance wear-resistant materials. The wear-resistance of the raymond roller mill or raymond grinding mill is high and works reliably.

1. Before installation the Raymond mill or Raymond grinding mill, you should take care of the grindingplant and smear rust-proof oil and grease on the surface in order to avoid sun and rain and prevent rust and water of the body. So, you'd better establish maintenance regime.

2. Choose proper height and installation location according to the size of foundation drawing. The base of raymond grinding mills should adopt high table cement. Before being poured the base shall be buried steel. After having poured, the base should have 15 days of warranty period.

4. When the using time calculated from the factory is more than 6 months, you should clean and check the transmission device, grinding device, analyzer, and oil pool and so on. After having checked, you should add enough grease.

Model 4525 4119 Feeding Size(mm) 30 25 Output Size(mm) 0.173-0.044 0.173-0.044 Shift Output of Different Material Fineness(t) 16-176 8-78 Rotation Speed of Central Shaft(r/min) 82 105 Ring Diameter(mm) 1770 1400 Roller Diameter(mm) 450 410 Roller Height(mm) 250 190 Main Motor(kw) Y315M-4-132 Y280S-4-75 Fan Motor Y315M-4-132 Y280S-4-75 Analyzer Motor YCT250-4A-18.5 YCT200-4B-7.5

Raymond mill or raymond grinding mill is commonly used grinding plant, which is mainly used for the grinding and processing of barite, calcite, marble, limestone, dolomite, activity white soil, activated carbon, kaolin, cement, phosphorus ore, gypsum, glass and other non-flammable and explosive materials whose Mo's hardness is not than 9.3 level and humidity is below 6% in chemical and building, industry.

4. Important parts adopt high-quality steel materials and wear-resistant parts all use high-performance wear-resistant materials. The wear-resistance of the raymond roller mill or raymond grinding mill is high and works reliably.

1. Before installation the Raymond mill or Raymond grinding mill, you should take care of the grindingplant and smear rust-proof oil and grease on the surface in order to avoid sun and rain and prevent rust and water of the body. So, you'd better establish maintenance regime.

2. Choose proper height and installation location according to the size of foundation drawing. The base of raymond grinding mills should adopt high table cement. Before being poured the base shall be buried steel. After having poured, the base should have 15 days of warranty period.

4. When the using time calculated from the factory is more than 6 months, you should clean and check the transmission device, grinding device, analyzer, and oil pool and so on. After having checked, you should add enough grease.

Interested in our machine? We'd love to hear from you! Leave us a message now for discount price. Our professional team will reply to you within one business day. Thank you so much and wish you a good day!

raymond mill - sunco machinery

raymond mill - sunco machinery

Overview of Raymond Mill (Grinding Mill): Raymond Mill (Grinding Mill) is mainly used to grind and process variety kinds of non-flammable and non-explosive materialswith hardnessless than 7 and humidityless than 6% in mining, construction, chemical industry, etc. Raymond Mill (Grinding Mill) is ideal grinding machine to grind and process the materials such as limestone, gypsum, barite, carbonate calcium, marble, feldspar,dolomite, granite, kaolin, bentonite, bauxite, etc. After being grinded by the Raymond Mill, the powder fineness can be 30-325 mesh (or 0.613mm-0.044mm), some very fine powder can be up to 1000mesh (or 0.013mm). The powder size can be controlled continuously by adjusting the powder classifier of the raymond mill. Features of Raymond Mill (Grinding Mill): The whole plant isvertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room. Working Principle of Raymond Mill (Grinding Mill): Raw material is crushed by jaw crusher to the size required which is suitable for the Raymond Mill (Grinding Mill), Then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feederevenly and continuously into the grinding chamber for grinding mill. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind. After this, the ground stuff are carried by the air from the blower into the powder separator (Analyzer Machine) for screening. The fine powers are blow into the cyclone powder collector and are poured out through the output-powder valve as the final products, and the corase stuff after the screening will be recycled back into the grinding chamber for regrinding. The sets airflow system is closely sealed up and circulated under condition of negative and positive pressure. Technical Data of Raymond Mill (Grinding Mill): Model Roller Number Roller Size (mm) Maximum FeedSize (mm) Finenessof FinalProduct (mm) Output (t/h) Main Frame Power (kW) BlowerPower (kw) Overall Dimension (mm) 5R4119 5 410190 20-25 0.613-0.044 5-12 75 75 785080009700 4R3216 4 320160 20-25 0.28-0.047 1.0-8.0 37 30 9900580010580 3R2715 3 270150 15-20 0.28-0.047 0.7-3 22 18.5 870050007819 3R2615 3 260150 15-20 0.28-0.047 0.5-2.7 18.5 15 565033055950 3R2115 3 210150 15-20 0.28-0.047 0.4-1.6 15 11 450028005800 3R1410 3 140100 5-10 0.28-0.047 0.1-1.0 7.5 5 320021004500 Notice: Any change ofRaymond Mill (Grinding Mill) technical data shall not be advised additionally. If you are interested in our Raymond Mill, please refer to: Email:[email protected] Mobile:+86 Skype:cliff-qin Video:https://www.youtube.com/watch?v=OEY6sF_TbpM https://www.youtube.com/watch?v=mKndTS0SpOI

Raymond Mill (Grinding Mill) is mainly used to grind and process variety kinds of non-flammable and non-explosive materialswith hardnessless than 7 and humidityless than 6% in mining, construction, chemical industry, etc. Raymond Mill (Grinding Mill) is ideal grinding machine to grind and process the materials such as limestone, gypsum, barite, carbonate calcium, marble, feldspar,dolomite, granite, kaolin, bentonite, bauxite, etc.

After being grinded by the Raymond Mill, the powder fineness can be 30-325 mesh (or 0.613mm-0.044mm), some very fine powder can be up to 1000mesh (or 0.013mm). The powder size can be controlled continuously by adjusting the powder classifier of the raymond mill.

Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant.

Then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feederevenly and continuously into the grinding chamber for grinding mill. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.

After this, the ground stuff are carried by the air from the blower into the powder separator (Analyzer Machine) for screening. The fine powers are blow into the cyclone powder collector and are poured out through the output-powder valve as the final products, and the corase stuff after the screening will be recycled back into the grinding chamber for regrinding. The sets airflow system is closely sealed up and circulated under condition of negative and positive pressure.

Model Roller Number Roller Size (mm) Maximum FeedSize (mm) Finenessof FinalProduct (mm) Output (t/h) Main Frame Power (kW) BlowerPower (kw) Overall Dimension (mm) 5R4119 5 410190 20-25 0.613-0.044 5-12 75 75 785080009700 4R3216 4 320160 20-25 0.28-0.047 1.0-8.0 37 30 9900580010580 3R2715 3 270150 15-20 0.28-0.047 0.7-3 22 18.5 870050007819 3R2615 3 260150 15-20 0.28-0.047 0.5-2.7 18.5 15 565033055950 3R2115 3 210150 15-20 0.28-0.047 0.4-1.6 15 11 450028005800 3R1410 3 140100 5-10 0.28-0.047 0.1-1.0 7.5 5 320021004500

joyal-raymond mill,raymond mill for sales,raymond mill manufacturer

joyal-raymond mill,raymond mill for sales,raymond mill manufacturer

Raymond mill is a traditional mill type, which is to grind non-flammable and non-explosive materials in the fields of building materials, mining, metallurgy and chemical industry with hardness less than 7 in Mohs scale and humidity less than 6 percent.

Raymond mill is a traditional mill type, which is to grind non-flammable and non-explosive materials in the fields of building materials, mining, metallurgy and chemical industry with hardness less than 7 in Mohs scale and humidity less than 6 percent.

General:Crushing -- Grinding -- Selecting -- Collecting Detailed:Materials first enter jaw crusher to be crushed to smaller size. Then they are lift to storage room by elevator. Vibrating feeder will feed materials into grinding room evenly. When the materials are put into the grinding room of the main equipment, the grinding roll swings outward and presses closely upon the grinding ring due to the centrifugal force in rotation of the main shaft. The shovel carries materials to the space between the grinding roll and grinding ring, and materials are ground as the grinding roll rolling. After being ground,the qualified powder is selected by Separator via the cycle wind of the blower and the rough powder will be back to the grinding room for regrinding. The qualified powder is brought into the powder collector by airflow. The powder comes out as end products.

raymond mill,raymond grinder video - hxjq machinery

raymond mill,raymond grinder video - hxjq machinery

Compared with ball mill, this equipment has high grinding efficiency, low electricity consumption and small coverage size and one-time investment. The grinding roll tightly presses on the grinding ring under centrifugal force; for this reason, when the grinding roll and the grinding ring are abraded, the output and the fineness of the final products are not influenced. The changing cycle of the grinding roll and the grinding ring is long. The air separation flow of this machine cyclically flows inside the air blower, mill case, cyclone separator and air blower, so that compared with high-speed centrifugal crusher, this machine has little powder dust and the operational workshop is clean.

Hongxing Raymond mill is widely used in ultrafine powder processing of barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, heat insulator and other non-flammable and non-explosive materials with Mok's hardness not more than 9.3 and humidity below 6%. The size of R-type Raymond mill can be regulated within 80-325, and part of the materials can be as high as 600. According to different materias to be processed, Raymond mill is also called limetone grinding mill, dolomite grinding mill, barite grinding mill, etc.

The machine consists of the host, analyzer, blower, cyclone separator, micro powder cyclone separator and air hose. Moreover, the host consists of rack, diffuser, shovel knife, grinding roll, grinding ring and housing.

R-typeRaymond millis used for grinding the barite, limestone, kaolin, ceramics, and slags which with the hardness below 9.3 of Mohs in the trades of mining, metallurgical industry, chemical engineering and building material for high fine powder generating and processing. The particle size of finished product can be adjusted from 80 to 325 meshes at random and the particle size of part materials can reach 2000 meshes at the maximum.

Note: For product inquiry or order requirements, Please fill the following form, and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties.

Related Equipments