spiral chute separator gard

garlock blue-gard gasket sheet and cut gaskets

garlock blue-gard gasket sheet and cut gaskets

The Garlock BLUE-GARD compressed, non-asbestos (CNA) gasketing line offers a variety of elastomers that provide exceptional sealability and excel in a wide range of services. The unique blend of aramid fibers, fillers and elastomeric binders provides improved torque retention and drastically lowered emissions levels. BLUE-GARD gasketing offers cost savings by cutting operational costs through reduced waste, maintenance, stocked inventory, fluid loss, and energy consumption.

john deere 3025d | hutson inc

john deere 3025d | hutson inc

This small tractor was built for heavy hauling. It comes standard with 4WD for maximum traction and is packed with a heavy-duty drivetrain with a 8F/8R gear drive transmissiondelivering a standard hauling capacity of 4,400 lbs.

Let's be honest, hooking up three-point hitch implements can be a pain. You have to get everything lined up perfect then worry about getting your pins in. The iMatch Quick Hitch takes all that pain away.

The 3D Tractors are available with a gear drive transmission with eight speeds in both forward and reverse directions. It includes a drivetrain built with heavy-duty components like those used in some John Deere utility tractors. These components ensure a rugged and durable machine.

Key John Deere advantage - A column-mounted forward/reverse lever is a more ergonomic alternative to the floor-mounted design of the competition. Having controls at the operators fingertips allows for an effortless change in directions at any time.

All 3D Series Tractors come standard with a fuel gauge that is easy to read from the operator's station to ensure operators do not run out of fuel. The fuel tank is also located on the rear of the tractor to allow for easy refill.

3D Series Tractors can be equipped with a field-installed rear hydraulic remote kit, providing two additional hydraulic spools on the back of the tractor. This kit can be field installed on a tractor with a loader or without a loader.

NOTE: Neither of the spools in this kit are equipped with a detent position; therefore, they should not be hooked up to anything with a motor, as the valve was not designed to be run open. The kit is designed for momentary, on-demand hydraulic flow such as moving a cylinder.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement tofit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

Offer valid on qualifying purchases made between 04 May 2021 to 03 August 2021. Subject to approved installment credit with JohnDeere Financial. Down payment may be required. Average down payment is 10%. $13.89 per month for every $1,000 financed. 0% APR for 72 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in JohnDeere's Special Discount Program or in JohnDeere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

2Offer valid on qualifying purchases made between 04 May 2021 to 03 August 2021. Subject to approved installment credit with JohnDeere Financial. No down payment required. $13.89 per month for every $1,000 financed. 0% APR for 72 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in JohnDeere's Special Discount Program or in JohnDeere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

1Offer valid for $250 off all New JohnDeere Sub-Compact and Compact Tractors when purchased with two or more JohnDeere or Frontier Implements purchased from an authorized JohnDeere dealer between 04 May 2021 to 03 August 2021. Each implement must have a minimum List Price of $350. Prices and models may vary by dealer. This can be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in JohnDeere's Special Discount Program or Rental Business Program are not eligible. Offer is available only on New JohnDeere Sub-Compact and Compact Utility Tractors only at participating United States dealers. Prices and savings are in U.S. dollars.

Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutsons area of responsibility. See dealer for details.

Related Equipments