system sand production line red wings

sand control

sand control

Migration ofsandwithin the reservoircan present major obstacles to well production through reduced production rates, sand bridging, erosion of equipment, and sand disposal and removal. Our sand control services begin with an in-depth analysis of the reservoir and well conditions.

Based on your unique needs, wethenprovide specialized surface and downhole equipment,including gravel pack packers and screens, surface pumping equipment, fluid systems, and filtration systems, all supportedbycompletion service so you canmaximizevalue from your assets.

Multizone sand control completion systems are proven to save valuable rig time. Halliburton has a long, successful history withsingle-tripmultizone sand control systems that save days of rig time over stacked sand control systems, capture short, lowreserve intervals that would normally be bypassed, and reduce risk by helping eliminatethe need torun and retrievepacker plugs.

These screened pipe joints positioned in the wellbore, opposite formation perforations, block sand while allowing oil or water to flow through. Halliburton screen technology offers operators every conceivable advantage: precise particle size control, high strength and durability, unbeatable corrosion resistance, high pressure tolerance, increased containment capacity, superior erosion resistance,and backwash efficiency. They alsofeatureautomatic verification and real-time screen gauge manipulation.

We design ourinflow control devices (ICD) toimprove completion performance and efficiency by balancing inflow throughout the length of a completion. Autonomous ICDs restrict water and gas production to increase recoverable reserves and extend well production. Both technologies simplify sand control completions while increasing reliability.

Stimulation services have a simple goal: to maximize the value of the operator's assets. Halliburton helps achieve this goal with a wide range stimulation technologies, including advanced fluid systems, pumping capabilities and conductivity endurance technology.

Sand control procedures and practices vary throughout the world - and Halliburton's experience in the global marketplace ensure that our products and systems precisely match the character and requirements of specific formations.

cetc solar energy - products

cetc solar energy - products

CETC Solar Energy is comprised of three manufacturing sites. Combined, it covers the entire solar energy manufacturing chain, from raw silicon to complete solar electric systems. Very few solar electric companies in the world can make the claim of being a fully integrated manufacturer. Most have to rely on outside sources of supply for wafers, cells, laminates, or solar panels. A company who is fully integrated, such as CETC Solar Energy, has full control over the manufacturing of their product, from beginning to end. It is complete ownership of the product, in strictly controlled manufacturing environments, that ensures our customers will receive quality products which will produce clean energy for decades.

CETC Solar Energy is taking a giant step into the future with one subsidiary at its headquarter. Since 2008 CETC Solar Energy has been supporting the subsidiary Hunan Red Solar Photoelectricity Science and Technology Co., Ltd. The company is setting up industrial production for the recovery of solar silicon from silane, and it also handles the development and construction of a production plant for the manufacture of solar silicon of high purity based on metallurgical silicon.

Parallel to its own raw material activities, the concern also depends on traditional long-term partnerships with reliable external suppliers. In this manner, it has been possible for CETC Solar Energy, despite world-wide scarce capacities of silicon manufacture in the past, to ensure supplies of the raw material even in the future.

[Silicon is the main component of a solar cell and is melted from sand that is available endlessly - it is the element with the second largest quantity in the earth's crust. Mono-crystalline silicon is extracted from the earths magma. The internal crystal structure is homogenous, which can be recognized from the uniform external colour. Poly-crystalline silicon has a structure in which many crystals grow next to each other during solidification. Polycrystalline cells can be recognized from the transparent corn limits since there is a "Metal Flake Effect".]

The CETC Solar Energy subsidiary Hunan Red Solar Photoelectricity Science and Technology Co., Ltd. is one of the largest manufacturers of solar silicon wafers in China. A wide range of mono-crystalline and multi-crystalline solar wafers is manufactured at the plant to meet customer-specific requirements. Most of the wafers are further processed to make solar cells for standard products - not only within the company but also by a large number of customers nationwide. Wafers are also suitable as the input material for specialized applications.

[The high-purity silicon, melted into blocks, is prepared in stacks, from which, in turn, very thin discs (wafers) are cut with the help of modern wire-cutting technology. After cleaning and intensive final checks the mono-crystalline and poly-crystalline wafers from the basis for the production of solar cells. The physical semi-consuctor quality determines the attainable efficiency in the manufacture of the solar cells.]

The business division "Cells" that has been attached to the subsidiaries Beijing Zhongkexin Electronics Equipment Co., Ltd., Hunan Red Solar New Energy Science and Technology Co., Ltd., and Hunan Red Solar Photoelectricity Science and Technology Co., Ltd. produces solar cells from the preliminary product solar silicon wafer. The cells have all the required technical characteristics to generate electricity from sunlight. The company produces both mono-crystalline and multi-crystalline solar cells. Recently, one of our subsidiaries Hunan Red Solar Photoelectricity Science and Technology Co., Ltd. is capable of producing high quality PERC solar cells.

[A solar cell is the basic element used in the manufacture of solar modules. As a result of light impingement positive and negative charge carriers are released in the cells and an electric current flows (direct current). The efficiency (ratio of usable to input energy) of a solar cell made of poly-crystalline silicon under laboratory conditions lies in the range of 21.9 percent, and under actual manufacturing conditions the efficiency achieved is 17 to 19 percent. A cell made of mono-crystalline silicon attained an efficiency of about 26.7 percent under laboratory conditions and 18 to 20 percent under actual manufacturing conditions. The PERC (passivated emitter rear cell) solar cell technology is an upgrade technology for standard AL-BSF solar cells which increases efficiencies by using aluminium oxide (AIOx) passivation with a silicon nitrate capping layer to improve the transformation of solar energy into electric energy.]

In the business division "Modules" solar cells are made into larger units - the modules - by putting them together, framing them and encapsulating them in weatherproof manner. The solar energy modules are the solar end products, ready for the generation of power and feeding it into the mains and / or for direct supply to consumers. The module manufacture is undertaken at the subsidiaries Beijing Zhongkexin Electronics Equipment Co., Ltd., Hunan Red Solar New Energy Science and Technology Co., Ltd., and Hunan Red Solar Photoelectricity Science and Technology Co., Ltd. The company manufactures modules for power applications that comply with the three centralized and worldwide applicable standards IEC 61215, UL 1703 and the Safety Class II for solar power modules connected to the mains supply.

[Term for a unit that can be electrically connected, consisting of many solar cells, with weather protection (glass), embedding and framing. The direct current produced by the module is converted to alternating current with the help of an inverter for feeding into a public power network.]

What are the components required to generate electrical power directly on the rooftop? CETC Solar Energy has supplied kits many years ago. These PV complete systems have all that the electrician requires for his customers - modules, inverter and racks. In addition to this, suitable bolts and nuts. Even wiring and mounting diagrams are a part of the system. These kits are made of high-quality materials and have been conceived and designed for use in various countries.

The alternative to the kit is the solar roof. In this case the photovoltaic plant replaces the rooftop cover. Instead of a conventional cover the roof is fitted with solar laminates and delivers clean energy from the sun. Whether a new construction or renovation: The solar rooftop can be integrated as a complete roof or as an in-roof solution.

CETC Solar Energy has developed solar power plants for large open areas. The panels that are made up of many modules, track the sun like a sunflower - and thus have a higher energy output than the conventional, fixed systems.

[Under solar application products one understands an entire system with which the operator can generate solar energy and feed it into the power grid. The building blocks consist of the module type selected and the required installation rack along with appropriate accessories. Each complete and integrated system must be tailor-made to suit the construction requirements of every individual customer.]

PV production equipments Solar ingot and wafer production line Solar cell production line Solar panel production line Solar wafer Solar cell Solar panel / PV module Solar PV system Solar power plant Solar powered LED lighting systems Solar smart solutions Programs Under B&R Initiative Ion Implanter Laser Beam Welding System Silicon Carbide (SiC) Substrate Silicon Carbide (SiC) Moissanite Sapphire Substrate Gallium Nitride (GaN) Substrate Space CIC GaAs Solar Cell LED Assembly Line Specialty Sensor Thermopile Sensor We are always interested to hear from you, whether you are a customer, an investor, a member of the press, or a professional looking for a job. E-mail us now!

Programs Under B&R Initiative Ion Implanter Laser Beam Welding System Silicon Carbide (SiC) Substrate Silicon Carbide (SiC) Moissanite Sapphire Substrate Gallium Nitride (GaN) Substrate Space CIC GaAs Solar Cell LED Assembly Line Specialty Sensor Thermopile Sensor We are always interested to hear from you, whether you are a customer, an investor, a member of the press, or a professional looking for a job. E-mail us now!

official detroit red wings website

official detroit red wings website

As we begin a new decade, we've reimagined and enhanced the experiences and benefits offered to our most loyal fans and ambassadors by introducing the all-new Detroit Red Wings Season Ticket Holder Membership Program.

As we begin a new decade, we've reimagined and enhanced the experiences and benefits offered to our most loyal fans and ambassadors by introducing the all-new Detroit Red Wings Season Ticket Holder Membership Program.

DetroitRedWings.com is the official Web site of the Detroit Red Wings. Detroit Red Wings and DetroitRedWings.com are trademarks of the Detroit Red Wings. NHL, the NHL Shield and the word mark NHL Winter Classic are registered trademarks and Original Six is a trademark of the National Hockey League. All NHL logos and marks and NHL team logos and marks as well as all other proprietary materials depicted herein are the property of the NHL and the respective NHL teams and may not be reproduced without the prior written consent of NHL Enterprises, L.P. Copyright 1999-2015 Detroit Red Wings and the National Hockey League. NHL 2020. All Rights Reserved.

foursquare - independent location data platform

foursquare - independent location data platform

Bring your ideas to life with solutions designed for app developers. Imagine the personalized functionalities you will deliver when you have the most comprehensive map of the world and the ability to understand human movement. Some of the largest brands are using geolocation tools to increase the utility, engagement, and delight their users experience on a daily basis, and you can too.

Information about people and information about places - we package them together into practical and flexible location data sets that you can add in your business intelligence tools and customer databases. Urban planning, financial modeling, and customer segmentation are just a few areas where an understanding of human movement using geospatial data will lead to smarter outcomes.

Effective campaigns are powered by real-world location data. By incorporating your customers behaviors - the places they go, the visits they make - into your strategy, success will mean more than clicks and views. Bring more customers into your stores with located-based targeting and identify the top drivers of incremental foot traffic to optimize your media plan.

Youve built your brand and were here to deliver its message. With our complete suite of in-house offerings, from media planning to creative development to attribution measurement, your marketing investment will move people into your stores. Use location analytics to capitalize on data.

official chicago blackhawks website

official chicago blackhawks website

Blackhawks.com is the official website of the Chicago Blackhawks. The Chicago Blackhawks and Blackhawks.com are trademarks of Chicago Blackhawk Hockey Team, Inc. NHL, the NHL Shield, the word mark and image of the Stanley Cup and NHL Conference logos are registered trademarks of the National Hockey League. All NHL logos and marks and NHL team logos and marks as well as all other proprietary materials depicted herein are the property of the NHL and the respective NHL teams and may not be reproduced without the prior written consent of NHL Enterprises, L.P. Copyright 1999-2020 Chicago Blackhawk Hockey Team, Inc. and the National Hockey League. All Rights Reserved.

Related Equipments