toothed roll crusher jar

reliable toothed roll crusher | fote machinery

reliable toothed roll crusher | fote machinery

Applied material: coal, pebble, perlite, limestone, dolomite, etc. Its outstanding features: high crushing capacity, hadraulic pressure used to adjust the distance between the rollers, and the centralization lubrication on the brearing.

The toothed roller crusher is generally used for the medium and fine crushing for brittle and medium-hard ores, and the size of the crushed product is usually not less than 20mm. Because of its simple structure, easy maintenance, and low price, it is popular to aggregate and coal ores suppliers.

A double toothed crusher with less volume is composed of two toothed rollers which is installed in parallel and rotates in opposite directions. The two-toothed rollers adopt non-meshing and non-constant speed operation to strengthen the degree of occlusion, which ideally prevents the material from slipping thus improving the crushing efficiency.

Generally speaking, materials are crushed in three stages in a double toothed roller crusher. The material enters the crushing chamber by the impact force of the deep tooth gear for the first crushing. The large-block material is cut by the teeth to complete the second crushing, and then being squeezed when they enter the toothed rollers to complete for the third crushing. Finally, the crushed material is discharged from the outlet with the rotation of the toothed roller.

1. The company makes further improvement in the aspects of feed particle size, rotor diameter, rotor channel, etc., so that this series of products can adjust the corresponding rotor structure and the corresponding speed according to different materials and feed grain levels to cooperate, and can achieve higher production volume and higher fineness modulus.

In recent years, with the transformation and upgrading of the coal industry, the requirements for coal development efficiency and environmental protection are increasing day by day. In the field of coal chemical industry, the requirements for product particle size are extremely strict, and generally the particle size is between 25 mm and 70 mm.

If the particle size is too large, the crusher chamber will be blocked, and downstream processing cannot be carried out. The toothed roll crusher is currently used in coal crushing because of its large processing capacity, low fine powder producing rate.

The crusher teeth are composed of big and small tooth phase interval, which can effectively improve the meshing capacity gear roller with the ensure of ideal particle size. Strong meshing capacity can improve the equipment processing capacity, reduce the tooth roller wear, prolong the tooth plate service life.

The connection between tooth plate and tooth roller base is made by screw fastening block, which not only guarantees the connection strength, but also has good interchangeability and replaceability.

Carbon bainite wear - resistant cast steel is used as the material of the tooth plate. The wear resistance of this material is about 40% higher than that of 40Cr surface-welded wear resistant layer. In addition, the whole tooth roller structure, including tooth plate, tooth roller seat, thread fastening block makes strength and hardness of each component more balanced and reasonable.

Besides, the motor is equipped with an electric heating system, and the hydraulic coupler and reducer are made of low temperature synthetic oil which ensures the transmission system smooth operation in the low temperature even with minus 30 .

The Indian customers coal mine adopts the single-bucket truck with semi-continuous mining process, and the raw coal has large grain size, gangue with great hardness. In the original production line, he firstly crushed the material to less than 300mm, then crushed them to less than 70mm by a ring hammer crusher. The crushed material with 70mm was transported to the coal storage bunker by conveyor belt for screening to final products of 25 ~ 70mm.

Technical improvement is urgently needed in order to reduce the operation cost and labor intensity of workers, and ensure the normal operation of the production system. So, the user finally chose Fote toothed roll crusher to replace the original ring hammer crusher.

After the double toothed roller crusher is put into use, the equipment runs stably, and the output particle size of the product has been improved obviously. The comparison shows that there is a 18.2% difference between the qualified products before and after the equipment replacement, which greatly increases the output of the qualified products and creates great economic benefits for the enterprise.

As a leading mining machinery manufacturer and exporter in China, we are always here to provide you with high quality products and better services. Welcome to contact us through one of the following ways or visit our company and factories.

Based on the high quality and complete after-sales service, our products have been exported to more than 120 countries and regions. Fote Machinery has been the choice of more than 200,000 customers.

toothed roll crusher for coal preparation plant - ftm machinery

toothed roll crusher for coal preparation plant - ftm machinery

Toothed roll crusher is widely used in coal, metallurgy, mining, chemical industry, building materials, and other industries, and it is more suitable to crush coal in large coal preparation plant and process waste. Toothed roll crusher has a high crushing capacity. The distance between the rollers can be adjusted by hydraulic pressure. The bearing of the toothed roll crusher is centralization lubrication. Whats more, it has the advantages of optimal design, high efficiency, uniform grain, and low cost.

Protective device: The motor is connected with the retarder through hydraulic coupling to avoid dynamic overload. The sensor overload protection is very reliable. If you have mining project or chemical plant, the toothed roller crusher is prepared for you in China Fote.

The toothed roll crusher is suitable for crushing raw coal in coal mines, coal preparation plants and other industries (allowing less than 30% of coal gangue in raw coal). The crusher is also used to break other brittle materials whose hardness is similar to that of raw coal.

It has the characteristics of high efficiency, long life, full sealing, low noise, and uniform granularity. The double-toothed roll crusher is equipped with a scraper to keep the groove and working surface clean. For the toothed roll crusher, the outlet-size depends on the gap between the two rollers, the size of teeth, shape of teeth, and the number.

The double-toothed roll crusher is relatively small in volume. It consists of two tooth rolls that are mounted in parallel and rotate in opposite directions. According to the crushing capacity and the size of the discharging granularity, the two crushing rolls are uniformly filled with brushing teeth.

And the double-toothed roll crusher adopts the operation way of non-circular, non-intermesh and non-uniform, which can enhance the contact face of roller teeth, and avoid material slippage and improve crushing efficiency.

When the toothed roller rotates, the teeth on the surface of the roller can bite the materials and crush them. Each roller crusher of the crushing system is driven by a separate motor. The roller crusher is generally driven by a belt, and it constitutes the deceleration system along with the reducing mechanism.

FTM double-tooth roller crusher for sand making, limestone, rock, clay crushing has a good crushing effect on wet and sticky materials. And adherence or clogging phenomenon never occurs during the work.

The silicon-aluminum raw material is an indispensable calibration material in the dry cement production process. After the mining work, the materials need to be crushed, transported and stored. and then they are sent to the raw material mill for grinding according to an appropriate ratio.

However, the silico-alumina raw materials have strong water storage capacity and high plasticity index, especially for bauxite and marlstone with water content more than 17% and plasticity index generally above 15. Because of the viscosity of materials, it can lead to blockage and arching during the process of crushing, transportation and storage, thus affecting the normal operation of the system.

In order to solve the problem of adherence and clogging of wet-adhesive materials in the crushing stage, FTM toothed roll crusher is used to break the mixture of limestone and marl. In detail, firstly, the wet and dry materials are mixed and crushed, and secondly, the wet-adhesive materials and other limestone materials with lower moisture content are mixed into the crusher. And finally, they are crushed according to an appropriate ratio.

The toothed roller crusher machine has advantages of small volume, large crushing ratio, low noise, simple structure, convenient maintenance, high productivity, uniform particle size of crushed material, low crushing rate, convenient maintenance, sensitive overload protection, safe and reliable.

double roll crushers gujarat, india

double roll crushers gujarat, india

Toothed Double Roll Crushers are used for crushing of friable and brittle materials like Coal, Coke, Sinter (hot and cold), Clay, Earth, Slag, Chalk, Soft Limestone etc. Due to cutting action of the teeth, crushing of material takes place mostly due to shear and not by pressing. Therefore fines generation is bare minimum.

Crushing takes place due to two rolls running in to each other and crushing the material caught in the valley of the rolls. One roll is fixed, while other one is adjustable & spring mounted, permitting un-crushable material to pass through.

Toothed rings are mounted on the heavy fabricated hub and the rings are kept, in position by holding bolts. These rings are made of wear-resistant steel, like Manganese Steel, or any other hardened steel depending upon the application.

Peripheral speed of rolls is kept between 3m-5m/sec and therefore up to 800 diameter roll crushers are driven, directly by V-belts. However, roll crushers above 800 mm diameter are provided with gear box/geared motor to keep the peripheral speed between specified limits of 3 m/ sec to 5 m/sec.

Gap Adjustment system is such, that during operation, gap can be adjusted along with the spring force. There are two spindles located one inside the other in such a way, that inner spindle tightens or losens the springs, while outer one changes the position of the roll.

We, at M/s. Rullitech Engineers are one of the leading manufacturers of Crushing like Stone Coal Crusher, Jaw Crusher, Reversible Impactor, Horizontal Shaft Impactor, Screening, Apron Feeder and Bulk Material Handling equipment.

roll crusher,double roll crusher,teeth roll crusher video - hxjq machinery

roll crusher,double roll crusher,teeth roll crusher video - hxjq machinery

Roll crusher is a new product independently designed, researched and manufactured by Hongxing Machinery according to the structural principle of American crusher and is widely used in coal, metallurgy, mine, chemistry and building material industry. This series of crusher has the advantages of small size, big crushing ratio, low noise, simple structure, convenient maintenance and high productivity.

The material feeding granularity is very big and the material discharging granularity is adjustable, and it is able to crush materials with compression strength less than 160MPa. It is ideal for especially the coal industry because when using this machine to crush the raw coal, the coal can be directly crushed after deironing and decontaminating.

Toothed roll crusher is a type of roll crusher. The main difference compared with ordinary roll crusher is toothed roll crusher has shape teeth on its crushing rollers, which can crush materials very well. It is very suitable for crushing materials with medium or below medium hardness, such as lump coal.

Note: For product inquiry or order requirements, Please fill the following form, and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties.

coal crushing: new-type toothed roll crusher vs traditional toothed roll crusher | hxjq

coal crushing: new-type toothed roll crusher vs traditional toothed roll crusher | hxjq

In the coal industry, the requirements for the particle size of the finished product are extremely strict. Generally, the particle sizes of the finished products are between 25 and 70 mm. If it is too large, the furnace will be blocked and further coal processing can't be performed.

Toothed roll crusher is the mature coal crushing equipment applied in the current coal industry, which satisfies all the demands of customers by its advantages of large capacity and low over-crushing rate.

Based on the original toothed roll crushers, HXJQ Mining Machinery has optimized the structure and materials of rollers according to the customers' requirements, so that to adapt the nature of hard gangue and special working conditions and ensure the normal production of coal enterprises.

Traditional toothed roll crusher is usually driven by double-motors. Two sets of motors, couplers and reducers are adopted to drive the independent rollers so that the rollers have the power to crush large coal materials.

The coupler is applied between reducer and rolls to transfer torque. And the toothed rollers and drive system are connected with the machine frame respectively to eliminate the vibrating of toothed roll crusher.

Traditional toothed roll crusher with ring structure has the advantages of stable and reliable performance, and the disadvantages of low wear resistance and hard to replace. Once the traditional toothed roll crusher is damaged, it must be returned to the factory for overhaul.

The traditional rollers are connected by the bolts and tooth-holders, which offers small bearing capacity. Therefore, the traditional toothed roll crushers are mainly applied in the clean-coal crushing process, because the raw coal will cause damage to roll crusher teeth.

In terms of tooth position, the roll crusher teeth are set in the peripheral direction, adopting the setting form of large tooth alternating with a small one. Under the premise of normal discharging size, the crushing force of roller can be improved efficiently, so that to increase the capacity, wear-resistance and service life.

As the picture shows, the new-type tooth-holder adopts the form of regular octagon. The toothed rollers and toothed holders are connected by the flat kay and socket head cap screws (the traditional ones are connected by bolts).

The contacted areas between tooth and toothed holders are processed and improved completely, and torque is transferred by flat key so that can prevent the socket head cap screws from the shearing force of coal materials. And the screws can be firmer and more reliable.

Meanwhile, the fastening bolt and the toothed roller holder are connected by the screw fastening blocks, which makes that the joint strength is ensured, and the interchangeability and the replaceability are also reliable.

The teeth are the main wearing parts of the toothed roll crusher, so it is very necessary to choose a suitable material. Therefore, it is required that the material should have enough hardness, toughness, impact resistance and wear resistance. Also, the following machinability and weldability should be considered.

When parts of high manganese steel are impacted repeatedly, the surface of parts gets changed, and the hardness increases rapidly, which can reach up to HRC54. It will improve the wear resistance significantly, but the inside of parts keeps flexibly. These are the main features of high manganese steel.

However, the toothed roll crushers crush coal materials by shearing and stretching, along with less impacting and squeezing, which makes high manganese steel can't play its advantages to enhance the hardness and strength. Therefore, high manganese steel is not suitable for making teeth.

To better improve the wear-resisting performance of teeth, traditional toothed roll crusher always adopts the low-alloy quenched and tempered steel as the material to make tooth of roll crushers. In general, 40 Cr is used to process the tooth. After processing, the compressive strength and the service life of tooth are improved.

However, since there are only a few millimeters thick wear-resisting layer in the surface of the tooth, it is required to be overlaid frequently in the process of use, which brings a large workload to workers.

The teeth of the new toothed roll crusher adopt the integral casting molding process, optimizes the proportion of the main elements such as C, Cr, Mn, Mo, Si, Ni. The medium carbon bainitic steel is selected finally to be the material of toothed roll.

The medium carbon bainitic steel has good hardenability. After quenching and tempering heat treatment, bainite with high hardness and wear resistance is processed. It has an excellent comprehensive performance of HRC50 hardness and compressive strength of 1500 MPa.

In addition, the material of the entire toothed roller structure, including the toothed roller, the toothed roller holder and the threaded fastening block, is reasonably matched, so that the strength and hardness of each component are more balanced and reasonable.

The raw coal is first crushed to below 300mm by the jaw crusher, and then crushed to below 70mm by a toothed roller crusher, and then transported to the coal storage bin by the belt conveyor. After screening, the final product of 25~70mm is sold to the chemical company.

The customer said it requires technical improvement urgently in their worksite urgently to reduce the operating cost of the enterprise and the labor intensity of the workers and to ensure the normal operation of the production system.

Since the new toothed roller crusher was put into use, the equipment has been running stably, the discharge size of the products is significantly improved, the over-crushing rate reduces, and the block-forming rate is highly increased (see the following table).

It can be seen from the above table that the difference between the qualified products before and after the replacement is 18.2%, which greatly improves the output of qualified products and creates great economic benefits for the enterprise.

In addition, the new toothed roller crusher has high wear resistance, and the fastening bolt is not easy to loosen, which reduces a large amount of maintenance time, the labor intensity of workers, and the maintenance cost of the coal crushing process.

With the transformation and upgrading of the coal industry, it is an inevitable trend to vigorously develop coal chemical industry. The coal chemical industry has strict requirements on the particle size of coal, which puts higher requirements on the crushing equipment.

The new toothed roller crusher can optimize the crushing operation of the raw coal by a series of optimizations on the structure and material of the toothed roller. It has a high block rate and a small maintenance amount. With the obvious technical advantages, the promotion prospects of new-type toothed roll crusher are broad.

Related Equipments